1. Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming

   • Maysam Gorji
   • Bekim Berisha
   • Frédéric Barlat

   Original Research 23 June 2015 Pages: 573 - 584

   

2. Plane-compression properties of microcellular injected polypropylene using gas counter pressure and core-back expansion process

   • José Antonio Reglero Ruiz
   • Michel Vincent
   • Noëlle Billon

   Original Research 24 June 2015 Pages: 585 - 590

   

3. Simulation-based investigations on the drape behavior of 3D woven fabrics made of commingled yarns

   • M. Hübner
   • J.-E. Rocher
   • C. Cherif

   Original Research 24 June 2015 Pages: 591 - 599

   

4. Orthogonal experimental design applied for wear characterization of aluminum/C_sf metal composite fabricated by the thixomixing method

   • Ebrahim Akbarzadeh
   • Josep A. Picas
   • M. Teresa Baile

   Original Research 24 June 2015 Pages: 601 - 612

   

5. AZ31 magnesium alloy recycling through friction stir extrusion process

   • Gianluca Buffa
   • Davide Campanella
   • Fabrizio Micari

   Original Research 01 July 2015 Pages: 613 - 618

   

6. Springback prediction and reduction in deep drawing under influence of unloading modulus degradation

   • Hamad ul Hassan
   • Fawad Maqbool
   • A. Erman Tekkaya

   Original Research 03 July 2015 Pages: 619 - 633

   

7. Investigation of the surface integrity and fatigue strength of Inconel718 after wire EDM and machine hammer peening

   • D. Trauth
   • F. Klocke
   • A. Klink

   Original Research 17 July 2015 Pages: 635 - 651

   

8. Enhancing time efficiency on single point incremental forming processes

   • Ricardo N. Pereira Bastos
   • Ricardo J. Alves de Sousa
   • Jorge A. Fernandes Ferreira

   Original Research 17 July 2015 Pages: 653 - 662

   

9. Predicting the tensile behaviour of adhesively bonded sheets using equivalent geometrical heterogeneities

   • V. Satheeshkumar
   • R. Ganesh Narayanan

   Original Research 24 July 2015 Pages: 663 - 675

   

10. Prediction of machining quality due to the initial residual stress redistribution of aerospace structural parts made of low-density aluminium alloy rolled plates

    • X. Cerutti
    • S. Arsene
    • K. Mocellin

    Original Research 07 August 2015 Pages: 677 - 690

    

11. Parameter identification of the homogeneous anisotropic hardening model using the virtual fields method

    • Jiawei Fu
    • Frédéric Barlat
    • Jin-Hwan Kim

    Original Research 16 August 2015 Pages: 691 - 696

    

12. Optimum design of formable CFRP sheets by generic algorithm and FE analysis by homogenization of multilayered structure with macroscopic anisotropy

    • Yuma Takahashi
    • Yu Uriya
    • Jun Yanagimoto

    Original Research 16 August 2015 Pages: 697 - 703

    

13. Prediction of turn down warping during hot plate rolling based on a Gaussian function

    • Jae Hyung Seo
    • Chester J. VanTyne
    • Young Hoon Moon

    Original Research 19 August 2015 Pages: 705 - 713