1. Engineering estimates of strain and strain rate in helical rolling of balls

   • Yan Beygelzimer
   • Emmanuil Beygelzimer
   • Daniel Hajduk

   Original Research 07 May 2024 Article: 32

   

2. A review of methods and effects for improving production robustness in industrial micro-deep drawing

   • Úlfar Arinbjarnar
   • Philipp Schumann
   • Chris V. Nielsen

   Review 09 May 2024 Article: 31

   

3. Influence of the sensitivity of plastic deformation to the third invariant on the stress state achievable during stretch forming of isotropic materials

   • Hernan Godoy
   • Benoit Revil-Baudard
   • Oana Cazacu

   Original Research 02 May 2024 Article: 30

   

4. Uncertainties on the mechanical behaviour of bronze sheets: influence on the failure in bending

   • Ghinwa Ouaidat
   • Amine Lagroum
   • Sandrine Thuillier

   Original Research 25 April 2024 Article: 29

   

5. Rotary compression test for determination of critical value of hybrid damage criterion for railway steel EA1T

   • Łukasz Wójcik
   • Tomasz Bulzak
   • Tomasz Kusiak

   Original Research Open access 17 April 2024 Article: 28

   

6. Investigation on the forming process of polylactic acid in material extrusion additive manufacturing technique

   • Shijie Jiang
   • Chaoqun Yun
   • Huisheng Yao

   Original Research 16 April 2024 Article: 27

   

7. Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

   • George Diyoke
   • Lars Rath
   • Benjamin Klusemann

   Original Research Open access 10 April 2024 Article: 26

   

8. Simulation and automation of aluminum panel shot peen forming

   • Vladislav Sushitskii
   • Pierre-Olivier Dubois
   • Frédérick Gosselin

   Original Research 04 April 2024 Article: 25

   

9. Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

   • Yongqiang Liu
   • Zhongxiang Pan
   • Zhenyu Wu

   Original Research 27 March 2024 Article: 24

   

10. Analysis, simulation and experimental study of electromagnetic forming of titanium bipolar plate with arc-shaped uniform pressure coil

    • Qiangkun Wang
    • Junrui Xu
    • Yuanfeng Wang

    Original Research 20 March 2024 Article: 23

    

11. Determination of the onset of yielding and the Young’s modulus after a change in the loading direction

    • Roman Norz
    • Simon Vitzthum
    • Wolfram Volk

    Original Research Open access 19 March 2024 Article: 22

    

12. Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigation

    • Lei Shang
    • Suxia Huang
    • Yong Pang

    Original Research 15 March 2024 Article: 21