Articles

1. Uncertainties on the mechanical behaviour of bronze sheets: influence on the failure in bending

   • Ghinwa Ouaidat
   • Amine Lagroum
   • Sandrine Thuillier

   Original Research 25 April 2024 Article: 29

   

2. Rotary compression test for determination of critical value of hybrid damage criterion for railway steel EA1T

   • Łukasz Wójcik
   • Tomasz Bulzak
   • Tomasz Kusiak

   Original Research Open access 17 April 2024 Article: 28

   

3. Investigation on the forming process of polylactic acid in material extrusion additive manufacturing technique

   • Shijie Jiang
   • Chaoqun Yun
   • Huisheng Yao

   Original Research 16 April 2024 Article: 27

   

4. Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

   • George Diyoke
   • Lars Rath
   • Benjamin Klusemann

   Original Research Open access 10 April 2024 Article: 26

   

5. Simulation and automation of aluminum panel shot peen forming

   • Vladislav Sushitskii
   • Pierre-Olivier Dubois
   • Frédérick Gosselin

   Original Research 04 April 2024 Article: 25

   

6. Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

   • Yongqiang Liu
   • Zhongxiang Pan
   • Zhenyu Wu

   Original Research 27 March 2024 Article: 24

   

7. Analysis, simulation and experimental study of electromagnetic forming of titanium bipolar plate with arc-shaped uniform pressure coil

   • Qiangkun Wang
   • Junrui Xu
   • Yuanfeng Wang

   Original Research 20 March 2024 Article: 23

   

8. Determination of the onset of yielding and the Young’s modulus after a change in the loading direction

   • Roman Norz
   • Simon Vitzthum
   • Wolfram Volk

   Original Research Open access 19 March 2024 Article: 22

   

9. Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigation

   • Lei Shang
   • Suxia Huang
   • Yong Pang

   Original Research 15 March 2024 Article: 21

   

10. Correction: Rapid multi-material joining via flow drill screw process: experiment and FE analysis using the coupled Eulerian‒Lagrangian method

    • Minki Kim
    • Sungho Kim
    • Namsu Park

    Correction 06 March 2024 Article: 20

    

11. Novel finite element model of analyzing wall thickness during tube drawing considering raw tube’s thickness non-uniformity and die misalignment

    • N. A. Razali
    • J. B. Byun
    • M. S. Joun

    Original Research 06 March 2024 Article: 19

    

12. Laser metal deposition of titanium on stainless steel with high powder flowrate for high interfacial strength

    • Di Cui
    • Akash Aggarwal
    • Marc Leparoux

    Original Research Open access 04 March 2024 Article: 18

    

13. Model validation of hollow embossing rolling for bipolar plate forming

    • Franz Reuther
    • Martin Dix
    • Sebastian Porstmann

    Original Research Open access 24 January 2024 Article: 17

    

14. Casting hybrid twin: physics-based reduced order models enriched with data-driven models enabling the highest accuracy in real-time

    • Amine Ammar
    • Mariem Ben Saada
    • Francisco Chinesta

    Manufacturing empowered by digital technologies and twins 23 January 2024 Article: 16

    

15. Correction: High-reduction radial shear rolling of aluminum alloy bars using custom-calibrated rolls

    • Yu V. Gamin
    • S. P. Galkin
    • I. S. ELDeeb

    Correction 15 January 2024 Article: 13

16. Multiscale numerical modeling of large-format additive manufacturing processes using carbon fiber reinforced polymer for digital twin applications

    • Pablo Castelló-Pedrero
    • César García-Gascón
    • Juan A. García-Manrique

    Original Research Open access 15 January 2024 Article: 15

    

17. Effect of die misalignment on the joining quality of Al/steel self-piercing riveting structure

    • Yuxuan Liao
    • Jun Zhang
    • Hao Jiang

    Original Research 15 January 2024 Article: 14

    

18. Stamping process analysis in an industrial plant and its limitations to obtain an industrializable Continuous Twin

    • Ivan Peinado-Asensi
    • Nicolás Montés
    • Eduardo García

    Manufacturing empowered by digital technologies and twins 10 January 2024 Article: 12

    

19. Finite difference based stress integration algorithm for crystal plasticity finite element method

    • Donghwan Noh
    • Jeong Whan Yoon

    Developments in modelling and simulation..Japan, South Korea and China Open access 04 January 2024 Article: 11

    

20. Identification of material parameters in low-data limit: application to gradient-enhanced continua

    • Duc-Vinh Nguyen
    • Mohamed Jebahi
    • Francisco Chinesta

    Manufacturing empowered by digital technologies and twins 02 January 2024 Article: 10

    

21. Development of a plane strain tensile test to characterize the formability of 5xxx and 6xxx aluminium alloys

    • Maryse Gille
    • Fanny Mas
    • Dominique Daniel

    Original Research 02 January 2024 Article: 9

    

22. Inline closed-loop control of bending angles with machine learning supported springback compensation

    • Dirk Alexander Molitor
    • Viktor Arne
    • Peter Groche

    Original Research Open access 13 December 2023 Article: 8

    

23. Predictive control for a single-blow cold upsetting using surrogate modeling for a digital twin

    • David Uribe
    • Cyrille Baudouin
    • Régis Bigot

    Manufacturing empowered by digital technologies and twins 04 December 2023 Article: 7

    

24. Rapid multi-material joining via flow drill screw process: experiment and FE analysis using the coupled Eulerian‒Lagrangian method

    • Minki Kim
    • Sungho Kim
    • Namsu Park

    Developments in modelling and simulation..Japan, South Korea and China 30 November 2023 Article: 6

    

25. High-reduction radial shear rolling of aluminum alloy bars using custom-calibrated rolls

    • Yu V. Gamin
    • S. P. Galkin
    • I. S. ELDeeb

    Original Research 28 November 2023 Article: 5

    

26. Polymer extrusion die design using a data-driven autoencoders technique

    • Chady Ghnatios
    • Eloi Gravot
    • Francisco Chinesta

    Manufacturing empowered by digital technologies and twins 14 November 2023 Article: 4

    

27. Experimental and numerical study of the closure of voids with different size and various locations in the three-dimensional cogging process

    • Marcin Kukuryk

    Original Research 14 November 2023 Article: 3

    

28. Bending behavior of structured steel sheets with undercuts for interlocking with Al die-cast metal

    • Aron Ringel
    • Gerhard Hirt

    Original Research Open access 09 November 2023 Article: 2

    

29. Unified thermomechanical model of Ti-6Al-4V titanium alloy considering microstructure evolution and damage fracture under different stress state

    • Rui Feng
    • Minghe Chen
    • Lansheng Xie

    Original Research 08 November 2023 Article: 1

    

30. The adaption, evaluation and application of a semi-empirical bond strength model for the simulations of multi-pass hot roll bonding of aluminium alloys

    • Zhao Liu
    • Alexander Krämer
    • Marco Teller

    Original Research Open access 03 November 2023 Article: 71

    

31. Simulation research on the rotating back extrusion process for magnesium alloy wheel

    • Yanchao Jiang
    • Qichi Le
    • Wenyi Hu

    Original Research 02 November 2023 Article: 69

    

32. Formability classifier for a TV back panel part with machine learning

    • Piemaan Fazily
    • Donghyuk Cho
    • Jeong Whan Yoon

    Developments in modelling and simulation..Japan, South Korea and China 02 November 2023 Article: 70

    

33. Membrane behavior of uni- and bidirectional non-crimp fabrics in off-axis-tension tests

    • Bastian Schäfer
    • Ruochen Zheng
    • Luise Kärger

    Original Research Open access 25 October 2023 Article: 68

    

34. Experimental and numerical study of frictional size effects in micro-metal forming

    • Alireza Alidoust
    • Abbas Ghaei

    Original Research 17 October 2023 Article: 67

    

35. Influence of the deformation sequence on the shape accuracy of multi-point forming

    • Bin-Bin Jia
    • Yan Shen
    • Yanxia Gu

    Original Research 13 October 2023 Article: 66

    

36. Investigation of the effect of light scattering on transmitted laser intensity at the weld interface during laser transmission welding of 3D printed thermoplastic parts

    • Le Anh-Duc
    • Benoît Cosson
    • André Chateau Akué Asséko

    Original Research 06 October 2023 Article: 65

    

37. Numerical analysis of tooling design for extruding wide aluminium hollow profiles using multi-container extrusion technology

    • Jiaxin Lv
    • Zhusheng Shi
    • Jianguo Lin

    Original Research Open access 02 October 2023 Article: 64

    

38. Integral forming of continuous CFRP sandwich sheet by additive manufacturing

    • Kazusa Nishi
    • Yuji Sato
    • Jun Yanagimoto

    Original Research Open access 27 September 2023 Article: 63

    

39. Low velocity impact tube hydroforming process: experiments and FSI modeling by considering ductile damage model

    • Arman Mohseni
    • Javad Rezapour
    • Reza Rajabiehfard

    Original Research 20 September 2023 Article: 62

    

40. A model for the autoclave consolidation of prepregs during manufacturing of complex curvature parts

    • Christopher Blackwell
    • Pavel Simacek
    • Suresh G. Advani

    Original Research 18 September 2023 Article: 61

    

41. Investigation of feature-based and space-filling tool path strategies for formability in incremental sheet metal forming

    • Sahil Bharti
    • Karthik Subramanya Karvaje
    • S. K. Panigrahi

    Original Research 15 September 2023 Article: 60

    

42. Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology

    • T. Borgert
    • D. Milaege
    • T. Tröster

    Forming processes as a lever a for boosting the ecological transition Open access 15 September 2023 Article: 59

    

43. Heterogeneities induced by uniaxial compression and resulting errors in material behavior assessment

    • Loïc Villié
    • Elodie Cabrol
    • Philippe Bocher

    Original Research 08 September 2023 Article: 58

    

44. Explaining hardness modeling with XAI of C45 steel spur-gear induction hardening

    • Sevan Garois
    • Monzer Daoud
    • Francisco Chinesta

    Original Research 29 August 2023 Article: 57

    

45. 2S-ML: A simulation-based classification and regression approach for drawability assessment in deep drawing

    • Tobias Lehrer
    • Arne Kaps
    • Marcus Wagner

    Original Research Open access 22 August 2023 Article: 56

    

46. Recent advances in 4D printing hydrogel for biological interfaces

    • Huanhui Wang
    • Jianpeng Guo

    Review 10 August 2023 Article: 55

    

47. Experimental and numerical investigation on the effect of rotational speed on exit-hole-free friction stir spot welding with consumable pin

    • N. Bhardwaj
    • R. Ganesh Narayanan
    • U. S. Dixit

    Original Research 07 August 2023 Article: 54

    

48. On the microstructure, recrystallization texture, and mechanical properties of Al/WO₃/SiC hybrid nanocomposite during accumulative roll bonding (ARB) process

    • Saeed Baazamat
    • Ehsan Borhani
    • Mohammad Tajally

    Original Research 31 July 2023 Article: 53

    

49. Improvements in elongation and tradeoffs in strength and ductility of several Mg sheet alloys through cyclic bending under tension and annealing

    • Nikolai Matukhno
    • Nemanja Kljestan
    • Marko Knezevic

    Original Research 31 July 2023 Article: 52

    

50. Experimental and numerical investigation of the deep rolling process focussing on 34CrNiMo6 railway axles

    • Tobias Pertoll
    • Christian Buzzi
    • László Boronkai

    Original Research Open access 24 July 2023 Article: 51