1. Oxidation of Fayalite in Molten Nickel Slag

   • Yongbo Ma
   • Xueyan Du

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 1 - 8

   

2. Preparation of High-Purity Tin by Zone Melting

   • Huan Zhang
   • Jinyang Zhao
   • Bin Yang

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 9 - 20

   

3. Optimization of Jet Pyrolysis Preparation of Micro-Nano MgO Magnesium Oxide

   • Chao Lv
   • Tiyuan Xia
   • Qiuyue Zhao

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 21 - 26

   

4. Sulfation Kinetics of Low-Grade Nickel–Copper Sulfide Ore in the Sulfuric Acid Roasting Process

   • Fuhui Cui
   • Wenning Mu
   • Xueyi Guo

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 27 - 41

   

5. Leaching Ni and Co from Saprolitic Laterite Ore by Employing Atmospheric Acid Leaching Solution with High Concentration of FeCl₃ at Mild Conditions

   • Zhang Peiyu
   • Guo Qiang
   • Qi Tao

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 42 - 48

   

6. Intensification of Sulfuric Acid Leaching of Copper from Sulfide Concentrates Using Ozone and Iron Ions

   • L. N. Krylova

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 49 - 56

   

7. Mechanism for the Reduction of Oxides in Copper-Smelting Slag under Blowing with CO–CO₂ Gas Mixtures

   • A. A. Komkov
   • R. I. Kamkin

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 57 - 64

   

8. Mathematical Model of Magnetic Hydrodynamics and Heat Transfer in an Aluminum Reduction Cell

   • A. A. Pianykh
   • G. V. Arkhipov
   • Ya. A. Tretyakov

   METALLURGY OF NONFERROUS METALS 29 March 2020 Pages: 65 - 73

   

9. Increasing the Properties of Copper Alloys by Refining–Modifying Treatment with Melt Carbonates of Alkaline Earth Metals

   • V. A. Korovin
   • T. D. Kurilina
   • V. B. Deev

   FOUNDRY 29 March 2020 Pages: 74 - 80

   

10. Developing, Simulating, and Researching a Production Process of Long Deformed Semi-Fabricated Aluminum–Magnesium Products with a Varying Scandium Content

    • S. B. Sidelnikov
    • O. V. Yakivyuk
    • I. N. Dovzhenko

    PRESSURE TREATMENT OF METALS 29 March 2020 Pages: 81 - 88

    

11. Effect of Aging Temperature on the Microstructure and Shear Strength of SAC0307-0.1Ni Lead-Free Solders in Copper Joints

    • Phairote Sungkhaphaitoon
    • Suchart Chantaramanee

    PHYSICAL METALLURGY AND HEAT TREATMENT 29 March 2020 Pages: 89 - 98

    

12. Studies on Structural Changes in the Surface Layers of Aluminum Alloys Based on the Al–Si–Cu System under Frictional Deformation

    • O. O. Shcherbakova
    • T. I. Muravyeva
    • I. V. Shkalei

    PHYSICAL METALLURGY AND HEAT TREATMENT 29 March 2020 Pages: 99 - 107

    

13. Corrosion of an Aluminum Matrix Composite in situ Based on Al–7Si–1Fe Alloy

    • A. B. Finkelstein
    • A. V. Shak
    • A. A. Schaefer

    CORROSION AND PROTECTION OF METALS 29 March 2020 Pages: 108 - 111

    

14. Preparation of Activated Carbon from Cashew Nut Shells for Water Purification

    • Kouassi Brou Guillaume
    • N. S. Serpokrylov
    • V. A. Gorina

    PRODUCTION PROCESSES AND PROPERTIES OF POWDERS 29 March 2020 Pages: 112 - 118

    

15. Production of the 70% Cu–30% Fe Alloy by SHS Metallurgy and Electrometallurgy: Comparative Analysis of Microstructures

    • V. V. Sanin
    • M. R. Filonov
    • D. M. Ikornikov

    SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS 29 March 2020 Pages: 119 - 125

    

16. Synthesis of Nb₂AlC MAX Phase by SHS Metallurgy

    • I. D. Kovalev
    • P. A. Miloserdov
    • D. Yu. Kovalev

    SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS 29 March 2020 Pages: 126 - 131

    

17. Deposition of Amorphous Hardening Coatings by Electrospark Treatment in a Mixture of Crystalline Granules

    • A. A. Burkov
    • V. O. Krutikova

    NANOSTRUCTURED MATERIALS AND FUNCTIONAL COATINGS 29 March 2020 Pages: 132 - 141