1. Selected Articles from the 11th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing

   • Surojit Gupta

   Guest Editorial 28 September 2020 Pages: 5541 - 5541

   

2. On the Synthesis and Characterization of Polylactic Acid, Polyhydroxyalkanoate, Cellulose Acetate, and Their Engineered Blends by Solvent Casting

   • Saud Abu Aldam
   • Maharshi Dey
   • Surojit Gupta

   OriginalPaper 25 March 2020 Pages: 5542 - 5556

   

3. Reduction and Immobilization of Chromate Using Nanometric Pyrite

   • Amelia Bergeson
   • Travis Reed
   • Allen W. Apblett

   OriginalPaper 27 April 2020 Pages: 5557 - 5563

   

4. Rare Earth Element Recovery Using Monoethanolamine

   • Paul Kim
   • Gaurav Das
   • Richard E. Riman

   OriginalPaper 25 June 2020 Pages: 5564 - 5573

   

5. Sinterability of Silicon Carbide and Boron Carbide under Single-Mode Microwave Fields

   • Selva Vennila Raju
   • Michael Kornecki
   • Raymond E. Brennan

   OriginalPaper 19 June 2020 Pages: 5574 - 5581

   

6. Influence of Soybean Hull Fiber Concentration on the Water Absorption and Mechanical Properties of 3D-Printed Thermoplastic Copolyester/Soybean Hull Fiber Composites

   • Vamsi Krishna Balla
   • Kunal H. Kate
   • Jagannadh Satyavolu

   OriginalPaper 13 August 2020 Pages: 5582 - 5593

   

7. A Study on the Sintering of a Mixed Powder Containing Alumina and Aluminum for Control of Volume Shrinkage during Sintering

   • Ken’ichiro Kita
   • Naoki Kondo
   • Mikinori Hotta

   OriginalPaper 01 September 2020 Pages: 5594 - 5601

   

8. Green Process for Preparation of Nickel Hydroxide Films and Membranes

   • Audrey Vecoven
   • Dewan Russel Rahman
   • Allen W. Apblett

   OriginalPaper 18 September 2020 Pages: 5602 - 5608

   

9. Multi-Objective Optimization for Energy Absorption of Carbon Fiber-Reinforced Plastic/Aluminum Hybrid Circular Tube under Both Transverse and Axial Loading

   • Qihua Ma
   • Boyan Dong
   • Tianjun Zhou

   OriginalPaper 17 September 2020 Pages: 5609 - 5624

   

10. Performance of Ceramic-Composite Armors under Ballistic Impact Loading

    • Santosh Kumar
    • Kiran Akella
    • N. K. Naik

    OriginalPaper 25 August 2020 Pages: 5625 - 5637

    

11. A Study on the Tribological Properties of Al-AlN-Y₂W₃O₁₂ Hybrid Composites

    • Jamuna Sethi
    • Sudipta Mohapatra
    • Karabi Das

    OriginalPaper 06 September 2020 Pages: 5638 - 5654

    

12. Tribological Performance and Tribofilm Evolution of TiAl Matrix Composites with Silver and Titanium Diboride at Elevated Temperatures

    • Bin Chen
    • Zengshi Xu
    • Weidong Ma

    OriginalPaper 17 September 2020 Pages: 5655 - 5662

    

13. Mechanisms of Fatigue Endurance in Alloy 617M at Different Temperatures (300-1023 K)

    • Aritra Sarkar
    • Chanchal Ghosh
    • R. Mythili

    OriginalPaper 18 September 2020 Pages: 5663 - 5671

    

14. Novel Al-Cu-Mn-Zr-Sc Compositions Exhibiting Increased Mechanical Performance after a High-Temperature Thermal Exposure

    • Justin Lamb
    • Baptiste Rouxel
    • Thomas Dorin

    OriginalPaper 28 August 2020 Pages: 5672 - 5684

    

15. Influence of Vacuum Support on the Fatigue Life of AlSi9Cu3(Fe) Aluminum Alloy Die Castings

    • Péter Szalva
    • Imre Norbert Orbulov

    OriginalPaper Open access 27 August 2020 Pages: 5685 - 5695

    

16. The Effect of Severe Plastic Deformation on the Corrosion Resistance of AISI Type 304L Stainless Steel

    • Gopinath Shit
    • S. Ningshen

    OriginalPaper 08 September 2020 Pages: 5696 - 5709

    

17. Effect of Twin-Induced Texture Evolution on Corrosion Resistance of Extruded ZK60 Magnesium Alloy in Simulated Body Fluid

    • Ying Xiong
    • Tao Zhu
    • Xinghua Gong

    OriginalPaper 31 August 2020 Pages: 5710 - 5717

    

18. Study on the Friction Behaviors of Copper Nanowires in Ionic Liquids under External Voltages

    • Zheng Wang
    • Lina Zhu
    • Shuai Wu

    OriginalPaper 01 September 2020 Pages: 5718 - 5727

    

19. Influence of Anticorrosive Coatings Integrated with Novel Core–Shell Pigment on the Corrosion Protection of Pipelines in CO₂ Environment

    • M. G. Mohamed
    • N. M. Ahmed
    • M. R. Mabrouk

    OriginalPaper 02 September 2020 Pages: 5728 - 5737

    

20. Hot Corrosion Performance of Plasma-Sprayed Multiwalled Carbon Nanotube–Al₂O₃ Composite Coatings in a Coal-Fired Boiler at 900 °C

    • Rakesh Goyal
    • Buta Singh Sidhu
    • Vikas Chawla

    OriginalPaper 02 September 2020 Pages: 5738 - 5749

    

21. Stress Corrosion Resistance of Laser Shock Peening/Microarc Oxidation Reconstruction Layer Fabricated on AZ80 Magnesium Alloy in Simulated Body Fluid

    • Ying Xiong
    • Xiaxia Hu
    • Renguo Song

    OriginalPaper 28 August 2020 Pages: 5750 - 5756

    

22. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation

    • S. V. Gladkovsky
    • D. A. Konovalov
    • S. V. Kuteneva

    OriginalPaper 11 September 2020 Pages: 5757 - 5763

    

23. Stress–Strain Properties of Artificially Aged 6061 Al Alloy: Experiments and Modeling

    • Rasid Ahmed Yildiz
    • Safak Yilmaz

    OriginalPaper 08 September 2020 Pages: 5764 - 5775

    

24. Study on the Lubrication Mechanism of Titanium Alloys with Surface Dimples Filled with Sn-Ag-Cu and TiC under Dry Sliding Friction

    • Bing Xue
    • Zhenyu Yang
    • Chaohua Wu

    OriginalPaper 08 September 2020 Pages: 5776 - 5786

    

25. Effect of Zn/Mg Ratio on Microstructure and Properties of Cold Extruded Al-xZn-2.4Mg-0.84Cu-0.2Zr-0.25Ti Aluminum Alloy

    • Chen Li
    • Xiaojing Xu
    • Ching-Tun Peng

    OriginalPaper 11 September 2020 Pages: 5787 - 5795

    

26. Microstructure and Corrosion Behavior of ZnO-Mg Coating on AISI 4140 Steel Fabricated by Spray Coating

    • T. Ramkumar
    • M. Selvakumar
    • P. Narayanasamy

    OriginalPaper 14 September 2020 Pages: 5796 - 5806

    

27. Effects of Ti Content and Annealing on Fracture Toughness and Scratch Resistance of Electroless Ni-P-Ti Coatings

    • Zhi Li
    • Zoheir Farhat

    OriginalPaper 11 September 2020 Pages: 5807 - 5821

    

28. Long-Term Creep Behavior of a CoCrFeNiMn High-Entropy Alloy

    • K. A. Rozman
    • M. Detrois
    • J. A. Hawk

    OriginalPaper 17 September 2020 Pages: 5822 - 5839

    

29. Field Study of Weather Conditions Affecting Atmospheric Corrosion by an Automobile-Carried Atmospheric Corrosion Monitor Sensor

    • Yan-liang Huang
    • Dan Yang
    • Xiu-tong Wang

    OriginalPaper 15 September 2020 Pages: 5840 - 5853

    

30. Effect of Ultrasonic Shot Peening on Oxidation Behavior of T91 and SS347 Steels in Air and Steam at 650 °C

    • Deepsovan Mondal
    • Kausik Chattopadhyay
    • Vakil Singh

    OriginalPaper 28 August 2020 Pages: 5854 - 5870

    

31. Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

    • P. R. Prabhu
    • Deepa Prabhu
    • S. M. Kulkarni

    OriginalPaper Open access 27 August 2020 Pages: 5871 - 5885

    

32. Solid-State Repair of Casting Defects in ZL210 Aluminum Alloy

    • Zan Lv
    • Song Han
    • Kang Yang

    OriginalPaper 28 August 2020 Pages: 5886 - 5893

    

33. Study on Low-Temperature Sintering Behavior of 90W-7Ni-3Fe Alloys: The Influence of Sn Addition

    • Wentan Zhu
    • Yunzhu Ma
    • Zhongliu Wen

    OriginalPaper 14 September 2020 Pages: 5894 - 5901

    

34. An Investigation on Constitutive Relation and Dynamic Recrystallization of Hastelloy C-276 Alloy During Hot Deformation

    • Shengli Guo
    • Jiachen Liu
    • Defu Li

    OriginalPaper 04 September 2020 Pages: 5902 - 5912

    

35. Thermal Analysis Experiments in Titanium and Magnesium Additions to 4130 Steel

    • Robert Tuttle

    OriginalPaper 27 August 2020 Pages: 5913 - 5922

    

36. Effects of Pre-Deformation and Heat Treatment on the Microstructure and Mechanical Properties of Cu-2.5Be Sheets

    • Yang Liu
    • Deshan Chen
    • Peng Zhang

    OriginalPaper 02 September 2020 Pages: 5923 - 5932

    

37. Effect of Trimming Process Parameters on Sheared Edge Geometry and Stretch Limit: An Experimental Investigation

    • K. Wang
    • G. Ayoub
    • G. Kridli

    OriginalPaper 08 September 2020 Pages: 5933 - 5949

    

38. Effect of Pre-treatment on Roughness and Hydrophobicity of Electro-Etched Steel with Improved Corrosion Resistance

    • Mohammad Alinezhadfar
    • Mahdi Mozammel

    OriginalPaper 05 September 2020 Pages: 5950 - 5958

    

39. Preparation and Tribological Behavior of Ti₂AlNb/Ag Self-Lubricating Composites

    • Wei Wang
    • Haixiong Zhou
    • Kuaishe Wang

    OriginalPaper 01 September 2020 Pages: 5959 - 5967

    

40. Effects of Heating Rate on the Thermal and Mechanical Properties of the Bauxite-Based Low-Cement Refractory Castables

    • Hajar Ahmadi Moghadam
    • Seyed Mohammad Arab

    OriginalPaper 06 September 2020 Pages: 5968 - 5974

    

41. Effects of Laser Premelting Treatment on Microstructure and Mechanical Properties of High-Strength Steel Weld Obtained by Laser-MAG Hybrid Welding

    • Yanqing Li
    • Shuangyu Liu
    • Genzhe Huang

    OriginalPaper 09 September 2020 Pages: 5975 - 5984

    

42. Electrochemical Surface Treatment to Enhance Corrosion Resistance and Bioresistance of Medical-Grade Stainless Steels

    • A. A. Kityk
    • V. Pavlik
    • Y. Halahovets

    OriginalPaper 08 September 2020 Pages: 5985 - 5994

    

43. The Impact of Solution Treatment Time (T6) and Deep Cryogenic Treatment on the Microstructure and Wear Performance of Magnesium Alloy AZ91

    • Mustafa Özgür Öteyaka
    • Burak Karahisar
    • Hasan Candan Öteyaka

    OriginalPaper 27 August 2020 Pages: 5995 - 6001

    

44. Effect of Heat Treatments on Residual Stress and Properties of AISI 316L Steel Processed by Directed Energy Deposition

    • Alberta Aversa
    • Gabriele Piscopo
    • Mariangela Lombardi

    OriginalPaper 06 September 2020 Pages: 6002 - 6013

    

45. Effect of Heat Treatment on the Microstructure Evolution and Sensitization Behavior of High-Silicon Stainless Steel

    • Prince Setia
    • Ayush Anand
    • Shashank Shekhar

    OriginalPaper 28 August 2020 Pages: 6014 - 6024

    

46. Strength and Deformation Properties of Low-Alloy Steel Bolts with Electroless Ni-P Coating: An Investigation of Two Thermal Routes

    • K. S. Correia
    • L. G. Greca
    • R. D. Torres

    OriginalPaper 30 August 2020 Pages: 6025 - 6032

    

47. Assessment of Cooling Performance of Neem Oil for Distortion Control in Heat Treatment of Steel

    • K. M. Pranesh Rao
    • K. Narayan Prabhu

    OriginalPaper 09 September 2020 Pages: 6033 - 6043

    

48. Kinetics of Cr₂N Precipitation and Its Effect on Pitting Corrosion of Nickel-Free High-Nitrogen Austenitic Stainless Steel

    • K. Krishna Kumar
    • J. Anburaj
    • R. Subramanian

    OriginalPaper 11 September 2020 Pages: 6044 - 6052

    

49. In Vitro Corrosion Behavior and Cytotoxicity of Polycaprolactone–Akermanite-Coated Friction-Welded Commercially Pure Ti/AZ31 for Orthopedic Applications

    • Mojtaba Sadeghi Gogheri
    • Masoud Kasiri-Asgarani
    • Mahdi Rafiei

    OriginalPaper 26 August 2020 Pages: 6053 - 6065

    

50. Forming Limit Diagrams of Low-Carbon Steels Obtained Using Digital Image Correlation Technique and Enhanced Formability Predictions Incorporating Microstructural Developments

    • Basavaraj H. Vadavadagi
    • H. V. Bhujle
    • Rajesh Kisni Khatirkar

    OriginalPaper 27 August 2020 Pages: 6066 - 6077