1. Prediction of Martensite Start Temperature in Alloy Steels with Different Grain Sizes

   • Seok-Jae Lee
   • Kyong-Su Park

   Communication 24 May 2013 Pages: 3423 - 3427

   

2. Effect of Microstructural Banding on the Fatigue Behavior of Induction-Hardened 4140 Steel

   • M. L. Hayne
   • P. I. Anderson
   • C. J. Van Tyne

   Communication 04 June 2013 Pages: 3428 - 3433

   

3. Foreword

   • Tadashi Furuhara
   • Jian-Feng Nie
   • Hatem S. Zurob

   Symposium: Atomistic Effects in Migrating Interphase Interfaces: Recent Progress and Future Study 09 April 2013 Pages: 3434 - 3435

4. Crystallographic Analysis of Proeutectoid Ferrite/Austenite Interface and Interphase Precipitation of Vanadium Carbide in Medium-Carbon Steel

   • Goro Miyamoto
   • Ryota Hori
   • Tadashi Furuhara

   Symposium: Atomistic Effects in Migrating Interphase Interfaces: Recent Progress and Future Study 22 March 2013 Pages: 3436 - 3443

   

5. Analysis of Acoustic Emission During the Melting of Embedded Indium Particles in an Aluminum Matrix: A Study of Plastic Strain Accommodation During Phase Transformation

   • Michael M. Kuba
   • David C. Van Aken

   Symposium: Atomistic Effects in Migrating Interphase Interfaces: Recent Progress and Future Study 10 October 2012 Pages: 3444 - 3455

   

6. Self-Consistent Model for Planar Ferrite Growth in Fe-C-X Alloys

   • H. S. Zurob
   • D. Panahi
   • G. R. Purdy

   Atomistic Effects in Migrating InterphaseInterfaces: Recent Progress and Future Study 24 October 2012 Pages: 3456 - 3471

   

7. Quantifying the Solute Drag Effect on Ferrite Growth in Fe-C-X Alloys Using Controlled Decarburization Experiments

   • C. Qiu
   • H. S. Zurob
   • C. R. Hutchinson

   Symposium: Atomistic Effects in Migrating Interphase Interfaces: Recent Progress and Future Study 11 December 2012 Pages: 3472 - 3483

   

8. Modeling Growth and Dissolution Kinetics of Grain-Boundary Cementite in Cyclic Carburizing

   • Hideaki Ikehata
   • Kouji Tanaka
   • Takeyuki Shimada

   Symposium: Atomistic Effects in Migrating Interphase Interfaces: Recent Progress and Future Study 17 April 2013 Pages: 3484 - 3493

   

9. Solid-State Transformation of Iron-Rich Intermetallic Phases in Al-Cu 206 Cast Alloys During Solution Heat Treatment

   • K. Liu
   • X. Cao
   • X.-G. Chen

   OriginalPaper 10 April 2013 Pages: 3494 - 3503

   

10. Microstructural Aspects of Second Phases in As-cast and Homogenized 7055 Aluminum Alloy with Different Impurity Contents

    • Huan She
    • Da Shu
    • Baode Sun

    OriginalPaper 12 April 2013 Pages: 3504 - 3510

    

11. Effects of Tungsten Addition on the Microstructure and Mechanical Properties of Microalloyed Forging Steels

    • Jingwei Zhao
    • Taekyung Lee
    • Chong Soo Lee

    OriginalPaper 20 March 2013 Pages: 3511 - 3523

    

12. Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining Through Martensite Thermomechanical Treatment

    • Peiman Behjati
    • Ahmad Kermanpur
    • Abbas Najafizadeh

    OriginalPaper 27 March 2013 Pages: 3524 - 3531

    

13. Scanning Electron Microscopy of Fe_79.5B_6.5C₁₄ Network Alloys: Part I

    • W. H. Chow
    • C. C. Leung
    • H. W. Kui

    OriginalPaper 25 April 2013 Pages: 3532 - 3543

    

14. Dent Resistance and Effect of Indentation Loading Rate on Superelastic TiNi Alloy

    • Zoheir Farhat
    • George Jarjoura
    • Meisam Shahirnia

    OriginalPaper 12 April 2013 Pages: 3544 - 3551

    

15. Phase Transformation Study in Nb-Mo Microalloyed Steels Using Dilatometry and EBSD Quantification

    • Nerea Isasti
    • Denis Jorge-Badiola
    • Pello Uranga

    OriginalPaper 17 April 2013 Pages: 3552 - 3563

    

16. The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel

    • M. Kulakov
    • W. J. Poole
    • M. Militzer

    OriginalPaper 10 April 2013 Pages: 3564 - 3576

    

17. Physical Simulation of Deformation and Microstructure Evolution During Friction Stir Processing of Ti-6Al-4V Alloy

    • S. S. Babu
    • J. Livingston
    • J. C. Lippold

    OriginalPaper 15 May 2013 Pages: 3577 - 3591

    

18. Developing Dislocation Subgrain Structures and Cyclic Softening During High-Temperature Creep–Fatigue of a Nickel Alloy

    • M. C. Carroll
    • L. J. Carroll

    OriginalPaper 17 April 2013 Pages: 3592 - 3607

    

19. Mechanical and Electrochemical Behavior of a High Strength Low Alloy Steel of Different Grain Sizes

    • K. S. Ghosh
    • D. K. Mondal

    OriginalPaper 23 April 2013 Pages: 3608 - 3622

    

20. Analysis of Acoustic Emission Signals during Tensile Deformation of Fe-Si Steels with Various Silicon Contents

    • Sabrina A. Khan
    • Pornthep Chivavibul
    • Manabu Enoki

    OriginalPaper 18 April 2013 Pages: 3623 - 3634

    

21. Failure during Sheared Edge Stretching of Dual-Phase Steels

    • B. S. Levy
    • M. Gibbs
    • C. J. Van Tyne

    OriginalPaper 10 April 2013 Pages: 3635 - 3648

    

22. Physical Simulation of Friction Stir Welding and Processing of Nickel-Base Alloys Using Hot Torsion

    • James R. Rule
    • John C. Lippold

    OriginalPaper 19 April 2013 Pages: 3649 - 3663

    

23. Study of \( \{ 11\bar{2} 1\} \) Twinning in α-Ti by EBSD and Laue Microdiffraction

    • Leyun Wang
    • Rozaliya Barabash
    • Philip Eisenlohr

    OriginalPaper 04 April 2013 Pages: 3664 - 3674

    

24. Achieving High Strength and High Ductility in Friction Stir-Processed Cast Magnesium Alloy

    • Wei Yuan
    • Sushanta K. Panigrahi
    • Rajiv S. Mishra

    OriginalPaper 20 April 2013 Pages: 3675 - 3684

    

25. Intergranular Corrosion of Σ9 Copper Bicrystal with Gradually Changed Misorientation in Young’s Dislocation Etchant

    • Yuhei Takehara
    • Hiroshi Fujiwara
    • Hiroyuki Miyamoto

    OriginalPaper 23 April 2013 Pages: 3685 - 3689

    

26. Microstructural Characteristics of a Stainless Steel/Copper Dissimilar Joint Made by Laser Welding

    • Shuhai Chen
    • Jihua Huang
    • Xingke Zhao

    OriginalPaper 16 March 2013 Pages: 3690 - 3696

    

27. Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding

    • Morteza Ghaffarpour
    • Sina Kolahgar
    • Kamran Dehghani

    OriginalPaper 19 April 2013 Pages: 3697 - 3707

    

28. An Experimental Study of Transient Liquid Phase Bonding of the Ternary Ag-Au-Cu System Using Differential Scanning Calorimetry

    • M. L. Kuntz
    • B. Panton
    • S. F. Corbin

    OriginalPaper 27 March 2013 Pages: 3708 - 3720

    

29. Effect of Tool Offset and Tool Rotational Speed on Enhancing Mechanical Property of Al/Mg Dissimilar FSW Joints

    • Zhiyuan Liang
    • Ke Chen
    • Aidang Shan

    OriginalPaper 20 March 2013 Pages: 3721 - 3731

    

30. Microstructure and Fatigue Properties of a Friction Stir Lap Welded Magnesium Alloy

    • B. S. Naik
    • D. L. Chen
    • P. Wanjara

    OriginalPaper 12 April 2013 Pages: 3732 - 3746

    

31. Effects of Heat Treatment on Grain-Boundary β-Mg₁₇Al₁₂ and Fracture Properties of Resistance Spot-Welded AZ80 Mg Alloy

    • Seyed Tirdad Niknejad
    • Lei Liu
    • Norman Y. Zhou

    OriginalPaper 18 April 2013 Pages: 3747 - 3756

    

32. A Phenomenological Model for Tool Wear in Friction Stir Welding of Metal Matrix Composites

    • Tracie J. Prater
    • Alvin M. Strauss
    • Chase D. Cox

    OriginalPaper 03 April 2013 Pages: 3757 - 3764

    

33. Relationship Between Solidification Microstructure and Hot Cracking Susceptibility for Continuous Casting of Low-Carbon and High-Strength Low-Alloyed Steels: A Phase-Field Study

    • B. Böttger
    • M. Apel
    • D. G. Eskin

    OriginalPaper 12 April 2013 Pages: 3765 - 3777

    

34. Experimental and Mathematical Procedure for Characterization of the Thermal Profile in a Quasi-Unidirectional Solidification Aluminum Alloy AA354 Casting

    • Bruno Fragoso
    • Henrique Santos

    OriginalPaper 09 April 2013 Pages: 3778 - 3782

    

35. Influence of Some Trace Elements on Solidification Path and Microstructure of Al-Si Foundry Alloys

    • Thomas Hartmut Ludwig
    • Paul Louis Schaffer
    • Lars Arnberg

    OriginalPaper 16 March 2013 Pages: 3783 - 3796

    

36. Chimney Formation in Solidifying Ga-25wt pct In Alloys Under the Influence of Thermosolutal Melt Convection

    • Natalia Shevchenko
    • Stephan Boden
    • Sven Eckert

    OriginalPaper 03 April 2013 Pages: 3797 - 3808

    

37. The Synthesis of the Fe₃O₄ Nanoparticles and the Analysis of the Current–Voltage Measurements on Au/Fe₃O₄/p-Si Schottky Contacts in a Wide Temperature Range

    • Ali Riza Deniz
    • Zakir Çaldıran
    • Şakir Aydoğan

    OriginalPaper 17 April 2013 Pages: 3809 - 3814

    

38. Microstructure Evolution During Friction Stir Processing and Hot Torsion Simulation of Ti-6Al-4V

    • John C. Lippold
    • Jason J. Livingston

    OriginalPaper 07 May 2013 Pages: 3815 - 3825

    

39. Investigation of the Effect of Tungsten Substitution on Microstructure and Abrasive Wear Performance of In Situ VC-Reinforced High-Manganese Austenitic Steel Matrix Composite

    • Emad Galin Moghaddam
    • Neda Karimzadeh
    • Parviz Davami

    OriginalPaper 12 April 2013 Pages: 3826 - 3835

    

40. Microstructure and Phase Constitution Near the Interface of Explosively Welded Aluminum/Copper Plates

    • Henryk Paul
    • Lidia Lityńska-Dobrzyńska
    • Mariusz Prażmowski

    OriginalPaper Open access 20 March 2013 Pages: 3836 - 3851

    

41. Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment

    • S. L. Semiatin
    • K. T. Kinsel
    • G. A. Sargent

    OriginalPaper 17 April 2013 Pages: 3852 - 3865

    

42. Evolution of Microstructure and Texture During Deformation and Recrystallization of Heavily Rolled Cu-Cu Multilayer

    • K. S. Suresh
    • A. D. Rollett
    • Satyam Suwas

    OriginalPaper 07 May 2013 Pages: 3866 - 3881

    

43. Defects in Carbon-Rich Ferrite of Cold-Drawn Pearlitic Steel Wires

    • Y. Z. Chen
    • G. Csiszár
    • R. Kirchheim

    OriginalPaper 10 April 2013 Pages: 3882 - 3889

    

44. Roll-Bonded Tri-Layered Mg/Al/Stainless Steel Clad Composites and their Deformation and Fracture Behavior

    • In-Kyu Kim
    • Sun Ig Hong

    OriginalPaper 20 March 2013 Pages: 3890 - 3900

    

45. The Surface Tension of Pure Aluminum and Aluminum Alloys

    • Ian Frank Bainbridge
    • John Andrew Taylor

    OriginalPaper 16 March 2013 Pages: 3901 - 3909

    

46. Effect of Zn Content on the Microstructure and Properties of Super-High Strength Al-Zn-Mg-Cu Alloys

    • Ziyong Chen
    • Yuanke Mo
    • Zuoren Nie

    OriginalPaper 17 April 2013 Pages: 3910 - 3920

    

47. Methods for Designing Concurrently Strengthened Severely Deformed Age-Hardenable Aluminum Alloys by Ultrafine-Grained and Precipitation Hardenings

    • Shoichi Hirosawa
    • Takumi Hamaoka
    • Daisuke Terada

    OriginalPaper 17 April 2013 Pages: 3921 - 3933

    

48. The Microstructural, Textural, and Mechanical Properties of Extruded and Equal Channel Angularly Pressed Mg-Li-Zn Alloys

    • M. Karami
    • R. Mahmudi

    OriginalPaper 16 March 2013 Pages: 3934 - 3946

    

49. Facilitating Basal Slip to Increase Deformation Ability in Mg-Mn-Ce Alloy by Textural Reconstruction Using Friction Stir Processing

    • Feng-chao Liu
    • Zong-yi Ma
    • Ming-jen Tan

    OriginalPaper 23 April 2013 Pages: 3947 - 3960

    

50. Impurity (Fe, Cl, and P)-Induced Grain Boundary and Secondary Phases in Commercially Pure Titanium (CP-Ti)

    • M. Yan
    • S. D. Luo
    • M. Qian

    OriginalPaper 10 April 2013 Pages: 3961 - 3969