1. Analysis of Martensite Pole Figure from Crystallographic View Point

   • Appa Rao Chintha
   • Vikram Sharma
   • Saurabh Kundu

   Communication 20 August 2013 Pages: 4861 - 4865

   

2. Influence of Grain-Refiner Addition on the Morphology of Fe-Bearing Intermetallics in a Semi-Solid Processed Al-Mg-Si Alloy

   • Tahsina Smith
   • Keyna O’Reilly
   • Ian Stone

   Communication 21 August 2013 Pages: 4866 - 4871

   

3. Excess Carbon Enrichment in Austenite During Intercritical Annealing

   • Zhen-Qing Liu
   • Goro Miyamoto
   • Tadashi Furuhara

   Communication 07 September 2013 Pages: 4872 - 4875

   

4. Manufacturing and Compressive Deformation Behavior of High-Strength Aluminum Coating Material Fabricated by Kinetic Spray Process

   • Kyu-Sik Kim
   • Ji-Sang Yu
   • Kee-Ahn Lee

   Communication 05 September 2013 Pages: 4876 - 4879

   

5. Foreword

   • David P. Field
   • Alexis Lewis
   • Stuart I. Wright

   Symposium: Quantification of Texture and Microstructure Gradients in Polycrystalline Materials 01 August 2013 Pages: 4880 - 4880

6. Characterization of Microstructure, Texture, and Microtexture in Near-Alpha Titanium Mill Products

   • A. L. Pilchak
   • C. J. Szczepanski
   • S. L. Semiatin

   Symposium: Quantification of Texture and Microstructure Gradients in Polycrystalline Materials 04 June 2013 Pages: 4881 - 4890

   

7. Unsupervised Learning for Efficient Texture Estimation From Limited Discrete Orientation Data

   • Stephen R. Niezgoda
   • Jared Glover

   Symposium: Quantification of Texture and Microstructure Gradients in Polycrystalline Materials 22 February 2013 Pages: 4891 - 4905

   

8. Texture Evolution within the Thermomechanically Affected Zone of an Al-Li Alloy 2195 Friction Stir Weld

   • Wesley A. Tayon
   • Marcia S. Domack
   • Stephen J. Hales

   Symposium: Quantification of Texture and Microstructure Gradients in Polycrystalline Materials 31 May 2013 Pages: 4906 - 4913

   

9. Laser Processing of Fe-Based Bulk Amorphous Alloy Coatings on Titanium

   • Himanshu Sahasrabudhe
   • Stanley A. Dittrick
   • Amit Bandyopadhyay

   Symposium: Quantification of Texture and Microstructure Gradients in Polycrystalline Materials 09 July 2013 Pages: 4914 - 4926

   

10. Characterization of Creep-Damaged Grain Boundaries of Alloy 617

    • Fan Zhang
    • David P. Field

    Symposium: Quantification of Texture and Microstructure Gradients in Polycrystalline Materials 06 September 2013 Pages: 4927 - 4936

    

11. Microstructures and Mechanical Properties of a New As-Hot-Rolled High-Strength DP Steel Subjected to Different Cooling Schedules

    • Jun Hu
    • Lin-Xiu Du
    • R. D. K. Misra

    OriginalPaper 27 June 2013 Pages: 4937 - 4947

    

12. Improvement of the Mechanical Properties of Al-Si Alloys by TiC Nanoparticles

    • Konstantin Borodianskiy
    • Alexey Kossenko
    • Michael Zinigrad

    OriginalPaper 29 June 2013 Pages: 4948 - 4953

    

13. Effect of Aging Treatment on Fatigue Behavior of an Al-Cu-Mg-Ag Alloy

    • M. E. Burba
    • M. J. Caton
    • C. J. Szczepanski

    OriginalPaper 06 September 2013 Pages: 4954 - 4967

    

14. Tensile Work Hardening Behavior of Thin-Section Plate and Thick-Section Tubeplate Forging of 9Cr-1Mo Steel in the Framework of One-Internal-Variable Kocks–Mecking Approach

    • B. K. Choudhary
    • J. Christopher

    OriginalPaper 10 July 2013 Pages: 4968 - 4978

    

15. Influence of Temperature and Strain Rate on Tensile Deformation and Fracture Behavior of P92 Ferritic Steel

    • B. K. Choudhary
    • E. Isaac Samuel
    • M. D. Mathew

    OriginalPaper 09 July 2013 Pages: 4979 - 4992

    

16. Effects of a Destabilization Heat Treatment on the Microstructure and Abrasive Wear Behavior of High-Chromium White Cast Iron Investigated Using Different Characterization Techniques

    • Hakan Gasan
    • Fatih Erturk

    OriginalPaper 29 June 2013 Pages: 4993 - 5005

    

17. Effects of Microalloying on the Impact Toughness of Ultrahigh-Strength TRIP-Aided Martensitic Steels

    • Junya Kobayashi
    • Daiki Ina
    • Koh-ichi Sugimoto

    OriginalPaper 20 July 2013 Pages: 5006 - 5017

    

18. On the Selection of the Optimal Intercritical Annealing Temperature for Medium Mn TRIP Steel

    • Seawoong Lee
    • Bruno C. De Cooman

    OriginalPaper 17 July 2013 Pages: 5018 - 5024

    

19. Dynamic Abnormal Grain Growth in Molybdenum

    • Daniel L. Worthington
    • Nicholas A. Pedrazas
    • Eric M. Taleff

    OriginalPaper 09 July 2013 Pages: 5025 - 5038

    

20. Corrosion Study of Super Ferritic Stainless Steel UNS S44660 (26Cr-3Ni-3Mo) and Several Other Stainless Steel Grades (UNS S31603, S32101, and S32205) in Caustic Solution Containing Sodium Sulfide

    • Kevin R. Chasse
    • Preet M. Singh

    OriginalPaper 23 July 2013 Pages: 5039 - 5053

    

21. Finite Element Modeling of the Inertia Friction Welding of Dissimilar High-Strength Steels

    • C. J. Bennett
    • M. M. Attallah
    • S. Bray

    OriginalPaper 09 July 2013 Pages: 5054 - 5064

    

22. Changes in Precipitate Distributions and the Microstructural Evolution of P24/P91 Dissimilar Metal Welds During PWHT

    • Karl E. Dawson
    • Gordon J. Tatlock
    • Peter Barnard

    OriginalPaper 23 July 2013 Pages: 5065 - 5080

    

23. Influence of Gas Atmosphere Dew Point on the Galvannealing of CMnSi TRIP Steel

    • Lawrence Cho
    • Myung Soo Kim
    • Bruno C. De Cooman

    OriginalPaper 12 July 2013 Pages: 5081 - 5095

    

24. Investigation of Electro-Kinetic Behavior of Cysteine on Electrodeposition of Ni Through the AC and DC Techniques

    • Mehdi Ebadi
    • Wan J. Basirun
    • Mohammad R. Mahmoudian

    OriginalPaper 25 July 2013 Pages: 5096 - 5105

    

25. Surface Reconstruction of an Annealing Twinned Ag-8Au-3Pd Alloy Wire Under Current Stressing

    • Tung-Han Chuang
    • Hsi-Ching Wang
    • Hsing-Hua Tsai

    OriginalPaper 20 July 2013 Pages: 5106 - 5112

    

26. Dependence of Competitive Grain Growth on Secondary Dendrite Orientation During Directional Solidification of a Ni-based Superalloy

    • Zhiyi Liu
    • Mao Lin
    • Hengzhi Fu

    OriginalPaper 26 June 2013 Pages: 5113 - 5121

    

27. Casting Atmosphere Effects on the Precipitates, Magnetism, and Corrosion Resistance of Fe₇₈Si₉B₁₃ Glassy Alloys

    • L. L. Meng
    • X. Y. Li
    • W. M. Wang

    OriginalPaper 19 July 2013 Pages: 5122 - 5133

    

28. Investigation on the Effect of Sulfur and Titanium on the Microstructure of Lamellar Graphite Iron

    • Elham Moumeni
    • Doru Michael Stefanescu
    • Jesper Henri Hattel

    OriginalPaper 27 July 2013 Pages: 5134 - 5146

    

29. Determination of Bulk Residual Stresses in Electron Beam Additive-Manufactured Aluminum

    • Craig A. Brice
    • William H. Hofmeister

    OriginalPaper 29 June 2013 Pages: 5147 - 5153

    

30. Numerical Modeling of Vacuum Heat Treatment of Nickel-based Superalloys

    • Francesco Cosentino
    • Nils Warnken
    • Roger C. Reed

    OriginalPaper 16 July 2013 Pages: 5154 - 5164

    

31. Effect of Boron on the Hot Ductility Behavior of a Low Carbon Advanced Ultra-High Strength Steel (A-UHSS)

    • Ignacio Mejía
    • Gerardo Altamirano
    • José María Cabrera

    OriginalPaper 16 July 2013 Pages: 5165 - 5176

    

32. On the Low Temperature Strain Aging of Bainite in the TRIP Steel

    • Ilana Timokhina
    • Hossein Beladi
    • Peter D. Hodgson

    OriginalPaper 09 July 2013 Pages: 5177 - 5191

    

33. Work of Adhesion in Al/SiC Composites with Alloying Element Addition

    • Xin Fang
    • Tongxiang Fan
    • Di Zhang

    OriginalPaper 29 June 2013 Pages: 5192 - 5201

    

34. High Cycle Fatigue of Cast Mg-3Nd-0.2Zn Magnesium Alloys

    • Zhenming Li
    • Qigui Wang
    • Guohua Wu

    OriginalPaper 29 June 2013 Pages: 5202 - 5215

    

35. Na Partitioning During Thermomechanical Processing of an Mg-Sn-Zn-Na Alloy

    • Jessica R. TerBush
    • Nicole Stanford
    • Matthew R. Barnett

    OriginalPaper 23 July 2013 Pages: 5216 - 5225

    

36. Determination of the β Solvus Temperature of the Aluminum Alloy 5083

    • Young-Ki Yang
    • Todd R. Allen

    OriginalPaper 28 June 2013 Pages: 5226 - 5233

    

37. The Structure and Kinetics of the Nanoscale Precipitation Processes in Al-1.0 wt pct Mg₂Si-0.4 wt pct Mg-0.5 wt pct Ag Alloy

    • Atif Mossad Ali
    • Abdel-Fattah Gaber
    • Susumu Ikeno

    OriginalPaper 09 July 2013 Pages: 5234 - 5240

    

38. Investigation of Structural and Diffuse Phase Transition of New Nano Lead-Free System xBAO – yBZT − (1 − x − y) BCT

    • Nagamalleswara Rao Alluri
    • S. K. S. Parashar
    • B. S. Murty

    OriginalPaper 24 July 2013 Pages: 5241 - 5250

    

39. Synthesis of Nanoscale Nd-Doped Ceria Via Urea-Formaldehyde Combustion Method

    • M. Biswas
    • S. Bandyopadhyay

    OriginalPaper 09 July 2013 Pages: 5251 - 5258

    

40. Mechanical Behavior of Al-SiC Nanocomposites Produced by Ball Milling and Spark Plasma Sintering

    • José J. Grácio
    • Catalin R. Picu
    • Claudia Buchheim

    OriginalPaper 12 July 2013 Pages: 5259 - 5269

    

41. Sulfidation Characteristics of an Advanced Superalloy and Comparison with Other Superalloys Intended for Gas Turbine Use

    • I. Gurrappa
    • I. V. S. Yashwanth
    • J. S. Burnell-Gray

    OriginalPaper 09 July 2013 Pages: 5270 - 5280