1. Quantification of Galvannealed Coating Phases Using the Galvanostatic Technique

   • R. Mishra

   Communication 11 July 2008 Pages: 2275 - 2277

   

2. Formation Mechanism for the Orientation Relationship between {110}〈001〉 and {111}〈112〉 Grains during Twinning in Fe-3 Pct Si Alloy

   • G.M. Rusakov
   • A.A. Redikultsev
   • M.L. Lobanov

   Communication 15 July 2008 Pages: 2278 - 2280

   

3. An Experimental Assessment of the Effects of Heat Treatment on the Microstructure of Ti-47Al-2Cr-2Nb Powder Compacts

   • O. Berteaux
   • F. Popoff
   • M. Thomas

   OriginalPaper 08 July 2008 Pages: 2281 - 2296

   

4. The Role of Excess Vacancies on Precipitation Kinetics in an Al-Mg-Sc Alloy

   • F. Fazeli
   • C.W. Sinclair
   • T. Bastow

   OriginalPaper 16 July 2008 Pages: 2297 - 2305

   

5. Abnormal Austenite-Ferrite Transformation Kinetics of Ultra-Low-Nitrogen Fe-N Alloy

   • Yongchang Liu
   • Ferdinand Sommer
   • Eric J. Mittemeijer

   OriginalPaper Open access 15 July 2008 Pages: 2306 - 2318

   

6. Deformation-Induced Transformation of Retained Austenite in Transformation Induced Plasticity-Aided Steels: A Thermodynamic Model

   • Monideepa Mukherjee
   • Shiv Brat Singh
   • Omkar Nath Mohanty

   OriginalPaper 15 July 2008 Pages: 2319 - 2328

   

7. Plastic Hinging Collapse of Periodic Cellular Truss Cores

   • B.A. Bouwhuis
   • E. Bele
   • G.D. Hibbard

   OriginalPaper 15 July 2008 Pages: 2329 - 2339

   

8. Tensile Properties of Ni-Based Superalloy 720Li: Temperature and Strain Rate Effects

   • K. Gopinath
   • A.K. Gogia
   • U. Ramamurty

   OriginalPaper 16 July 2008 Pages: 2340 - 2350

   

9. Influence of Temperature and Grain Size on Threshold Stress for Superplastic Flow in a Fine-Grained Magnesium Alloy

   • H. Watanabe
   • T. Mukai
   • K. Higashi

   OriginalPaper 11 July 2008 Pages: 2351 - 2362

   

10. Reaction Scheme and Liquidus Surface in the Al-Rich Section of the Al-Cr-Ni System

    • Franz Weitzer
    • Wei Xiong
    • Julius C. Schuster

    OriginalPaper 15 July 2008 Pages: 2363 - 2369

    

11. Evolution of Residual Stresses with Fatigue Crack Growth in a Variable Polarity Plasma Arc–Welded Aluminum Alloy Compact Tension Specimen

    • C.D.M. Liljedahl
    • O. Zanellato
    • M.E. Fitzpatrick

    OriginalPaper 30 July 2008 Pages: 2370 - 2377

    

12. Influence of Tool Dimension and Welding Parameters on Microstructure and Mechanical Properties of Friction-Stir-Welded 6061-T651 Aluminum Alloy

    • F.C. Liu
    • Z.Y. Ma

    OriginalPaper 15 July 2008 Pages: 2378 - 2388

    

13. Microstructural Evolution in the Transient-Liquid-Phase Bonding Area of IN-738LC/BNi-3/IN-738LC

    • M. Mosallaee
    • A. Ekrami
    • K. Matsuura

    OriginalPaper 15 July 2008 Pages: 2389 - 2402

    

14. Influence of Artificial Aging on Microstructure and Mechanical Properties of Dissimilar Welds between 310 Stainless Steel and INCONEL 657

    • H. Naffakh
    • M. Shamanian
    • F. Ashrafizadeh

    OriginalPaper 16 July 2008 Pages: 2403 - 2415

    

15. Structural and Textural Characterization of the Substrate and Coated Layer in an Industrial Galvannealed Interstitial-Free Steel

    • A. Chakraborty
    • R.K. Ray
    • S. Sangal

    OriginalPaper 19 July 2008 Pages: 2416 - 2423

    

16. Two-Dimensional Mathematical Modeling of the Pack Carburizing Process

    • S. Sarkar
    • G.S. Gupta

    OriginalPaper 08 July 2008 Pages: 2424 - 2434

    

17. Effect of Strontium and Phosphorus on Eutectic Al-Si Nucleation and Formation of β-Al₅FeSi in Hypoeutectic Al-Si Foundry Alloys

    • Y.H. Cho
    • H.-C. Lee
    • A.K. Dahle

    OriginalPaper 15 July 2008 Pages: 2435 - 2448

    

18. Comparison and Extension of Free Dendritic Growth Models through Application to a Ag-15 Mass Pct Cu Alloy

    • Selis Önel
    • Teiichi Ando

    OriginalPaper 08 July 2008 Pages: 2449 - 2458

    

19. Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography

    • A.B. Phillion
    • P.D. Lee
    • S.L. Cockcroft

    OriginalPaper 15 July 2008 Pages: 2459 - 2469

    

20. Improved Resistance to Stress-Corrosion-Cracking Failures via Optimized Retrogression and Reaging of 7075-T6 Aluminum Sheets

    • Murat Baydogan
    • Huseyin Cimenoglu
    • Jahan Rasty

    OriginalPaper 07 August 2008 Pages: 2470 - 2476

    

21. Mechanism of Oxidation of Austenitic Stainless Steels under Conditions of Hot Rolling in Steckel Mills

    • S.J. Cobo
    • E.J. Palmiere
    • W.M. Rainforth

    OriginalPaper 16 July 2008 Pages: 2477 - 2485

    

22. Factors Affecting the Development of Oxide Scales on Austenitic Stainless Steels during Hot Rolling in Steckel Mills

    • S.J. Cobo
    • W.M. Rainforth

    OriginalPaper 16 July 2008 Pages: 2486 - 2494

    

23. Deformation Geometry and Through-Thickness Strain Gradients in Asymmetric Rolling

    • R. Roumina
    • C.W. Sinclair

    OriginalPaper 17 July 2008 Pages: 2495 - 2503

    

24. Modification of Sensitization Resistance of AISI 304L Stainless Steel through Changes in Grain Size and Grain Boundary Character Distributions

    • Raghuvir Singh
    • Sandip Ghosh Chowdhury
    • Indranil Chattoraj

    OriginalPaper 22 July 2008 Pages: 2504 - 2512

    

25. On Factors Affecting the Phase Transformation and Mechanical Properties of Cold-Rolled Transformation-Induced-Plasticity–Aided Steel

    • Mohamed Soliman
    • Heinz Palkowski

    OriginalPaper 15 July 2008 Pages: 2513 - 2527

    

26. Mechanical Properties of Bulk Nanocrystalline Aluminum-Tungsten Alloys

    • K.V. Rajulapati
    • R.O. Scattergood
    • C.C. Koch

    OriginalPaper 16 July 2008 Pages: 2528 - 2534