Mechanical properties of thin films William D. Nix The 1988 Institute of Metals Lecture The Minerals, Metals & Materials Society Pages: 2217 - 2245
Phase equilibria of the Al-Li binary system Sinn-Wen ChenChia-Hong JanY. Austin Chang Alloy Phases Pages: 2247 - 2258
Phase distributions in rapidly solidified stainless steels L. GråbækE. JohnsonJ. V. Wood Alloy Phases Pages: 2259 - 2266
Laser-clad Ni70Al20Cr7Hf3 alloys with extended solid solution of Hf: Part I. Microstructure evolution S. SircarC. RibaudoJ. Mazumder Alloy Phases Pages: 2267 - 2277
Precipitation and fine structure in medium-carbon vanadium and vanadium/niobium microalloyed steels S. W. ThompsonG. Krauss Transformations Pages: 2279 - 2288
Study of the mechanism of fast diffusion of cobalt in thorium by diffusion and internal friction measurements S. C. AxtellO. N. Carlson Transport Phenomena Pages: 2289 - 2297
The effect of composition on marker movement and kirkendall porosity in ternary alloys Yoon-Ho SonJ. E. Morral Transport Phenomena Pages: 2299 - 2303
Roll cooling and its relationship to roll life A. A. TsengF. H. LinD. S. Ni Transport Phenomena Pages: 2305 - 2320
Cleavage fracture in pearlitic eutectoid steel D. J. AlexanderI. M. Bernstein Mechanical Behavior Pages: 2321 - 2335
Confirmation of a thin sheet toughening mechanism and anisotropic fracture in Al-Fe-X alloys Kwai S. Chan Mechanical Behavior Pages: 2337 - 2344
The influences of impurity content, tensile strength, and grain size on in-service temper embrittlement of CrMoV steels N. S. CheruvuB. B. Seth Mechanical Behavior Pages: 2345 - 2354
Deformation of whisker-reinforced metal-matrix composites under changing temperature conditions Glenn S. DaehnGaspar González-Doncel Mechanical Behavior Pages: 2355 - 2368
Micromechanics and fatigue crack growth in an alumina-fiber-reinforced magnesium alloy composite D. L. DavidsonK. S. ChanG. R. Leverant Mechanical Behavior Pages: 2369 - 2378
A research on hydrogen cracking in α-Fe K. F. HaL. W. ZhangB. Z. Liu Mechanical Behavior Pages: 2379 - 2384
Characterization of formability in cold-rolled steel sheets using electromagnetic acoustic tranducers M. HiraoH. FukuokaR. Murayama Mechanical Behavior Pages: 2385 - 2392
Theory of work-hardening applied to stages III and IV D. Kuhlmann-WilsdorfN. Hansen Mechanical Behavior Pages: 2393 - 2397
Ultrasonic nondestructive evaluation of matrix structures and nodularity in cast irons Shen-Chih LeeJia-Ming Suen Mechanical Behavior Pages: 2399 - 2407
Effects of microstructure of the behavior of an aluminum alloy and an aluminum matrix composite tested under low levels of superimposed hydrostatic pressure D. S. LiuM. ManoharanJ. J. Lewandowski Mechanical Behavior Pages: 2409 - 2417
Characteristics of hot-pressed fiber-reinforced ceramics with SiC matrix Tadahiko MiyoshiHironori KodamaShiroo Iijima Mechanical Behavior Pages: 2419 - 2423
Fatigue crack propagation in rapidly solidified aluminum alloys at 25 °C and 300 °C H. H. SmithD. J. MichelJ. R. Reed Mechanical Behavior Pages: 2425 - 2430
A comparison of ultrasonic and X-ray determinations of texture in thin Cu and Al plates R. B. ThompsonJ. F. SmithG. C. Johnson Mechanical Behavior Pages: 2431 - 2447
Particle bonding, annealing response, and mechanical properties of dynamically consolidated type 304 stainless steel powders R. N. WrightG. E. KorthJ. E. Flinn Mechanical Behavior Pages: 2449 - 2457
Interface characterization of fiber-reinforced Ni3Al matrix composites J. -M. YangW. H. KaoC. T. Liu Mechanical Behavior Pages: 2459 - 2469
Effects of changes in strain path on work hardening in cubic metals M. ZandrahimiS. PlatiasW. T. Roberts Mechanical Behavior Pages: 2471 - 2482
Hydrogen trapping in thoria-dispersed nickel Sung-man LeeJai-Young Lee Environment Pages: 2483 - 2488
Laser-clad Ni70Al20Cr7Hf3 alloys with extended solid solution of Hf: Part II. Oxidation behavior C. RibaudoS. SircarJ. Mazumder Environment Pages: 2489 - 2497
Microstructure and corrosion behavior of as-cast and heat-treated Al-4.5 Wt pct Cu-2.0 wt pct Mn alloys S. M. SkolianosT. Z. KattamisO. F. Devereux Environment Pages: 2499 - 2516
Fluid flow in solidifying monotectic alloys A. EckerD. O. FrazierJ. Iwan D. Alexander Solidification Pages: 2517 - 2527
A statistically significant experimental technique for investigating microsegregation in cast alloys M. N. Gungor Solidification Pages: 2529 - 2533
Infiltration of fibrous preforms by a pure metal: Part I. Theory A. MortensenL. J. MasurM. C. Flemings Solidification Pages: 2535 - 2547
Infiltration of fibrous preforms by a pure metal: Part II. Experiment L. J. MasurA. MortensenM. C. Flemings Solidification Pages: 2549 - 2557
The influence of carbon content on austenite-ferrite morphology in Fe-Mn-Al weld metals Chang-Pin ChouChien-Hsun Lee Transformations Pages: 2559 - 2561
Interdifusion coefficients in the zeta phase of the Fe-Al system R. K. BamolaL. L. Seigle Transport Phenomena Pages: 2561 - 2563
An investigation on the mechanism of 475°C embrittlement in High-Cr ferritic stainless steel K. F. HaH. M. ZhangK. L. Jing Mechanical Behavior Pages: 2563 - 2567
Dendritic growth in the carbon tetrabromide and hexachlorethane system V. SeetharamanL. M. FabiettiR. Trivedi Solidification Pages: 2567 - 2570