1. Tuning Physical Properties of NiFe2O4 and NiFe2O4@SiO2 Nanoferrites by Thermal Treatment | A. Bajorek et al. |
2. Hybrid Electron Beam Powder Bed Fusion Additive Manufacturing of Ti–6Al–4V: Processing, Microstructure, and Mechanical Properties | R. Tosi, E. Muzangaza, X. P. Tan, D. Wimpenny, M. M. Attallah |
| 3. The Constant-Stress, Constant-Heating-Rate Test: A Novel Method for Characterizing Transient Mechanical Behavior of Metallic Materials | S. L. Semiatin et al. |
| 4. Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys | Grzegorz Cieślak et al. |
| 5. A Scale-up Study on Chemical Segregation and the Effects on Tensile Properties in Two Medium Mn Steel Castings | T. W. J. Kwok, C. Slater, X. Xu, C. Davis, D. Dye |
| 6. Effect of Nucleant Particle Agglomeration on Grain Size | Feng Gao, Zhongyun Fan |
| 7. In Situ and Ex Situ TEM Analysis of the Copper Precipitation in Martensitic Steel | Margarita D. Bambach, Łukasz Szczepański, Andrzej M. Żak |
| 8. Influence of Strain Rate Sensitivity on Cube Texture Evolution in Aluminium Alloys | Elisa Cantergiani et al. |
| 9. On the Influence of Alloy Composition on the Additive Manufacturability of Ni-Based Superalloys | Joseph N. Ghoussoub et al. |
| 10. The Ductility and Shape-Memory Properties of Ni–Mn–Ga–Cu Heusler Alloys | Agnieszka Brzoza-Kos, Eduard Cesari, Maciej Jakub Szczerba |
| 11. Modeling and Simulation of Pore Formation in a Bainitic Steel During Creep | Felix Meixner, Mohammad Reza Ahmadi, Christof Sommitsch |
| 12. Non-uniform Grain Boundary Migration During Static Recrystallization: A Cellular Automaton Study | Fengxiang Lin, Mateusz Sitko, Lukasz Madej, Laurent Delannay |
| 13. Precipitation Kinetics During Post-heat Treatment of an Additively Manufactured Ferritic Stainless Steel | Chia-Ying Chou et al. |
| 14. Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization | Markus Ramsperger, Simon Eichler |
| 15. In Situ Investigation of TCP Phase Formation, Stress Relaxation and γ/γ′ Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction | A. Bezold, H. J. Stone, C. M. F. Rae, S. Neumeier |
| 16. Mechanisms of Densification and Bonding in the Ultrasonic Consolidation of Aluminum Powder | Huang Huang, Teiichi Ando |
| 17. Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel | Alexander Reitz, Olexandr Grydin, Mirko Schaper |
| 18. Alloy Design for Additive Manufacturing: Early-Stage Oxidation of Nickel-Based Superalloys | Joseph N. Ghoussoub et al. |
| 19. A Comparative Study of High Temperature Tensile and Creep Testing Between Standard and Miniature Specimens: Applicability and Limits | Yuanbo T. Tang et al. |
| 20. Quantifying Equiaxed vs Epitaxial Solidification in Laser Melting of CMSX-4 Single Crystal Superalloy | Runbo Jiang et al. |
| 21. Aluminum Cast Alloys Based on the Al–Ce–Si–Mg System: An Influence of Silicon on Crystallization, Phase Composition, and Tensile Properties | Frank Czerwinski, Babak Shalchi Amirkhiz |
| 22. Deformation Mechanisms Rationalisation to Design for Creep Resistance in Polycrystalline Ni-Based Superalloys | D. Barba et al. |
| 23. Hydrogen Diffusion and Trapping in Low-Alloy Tempered Martensitic Steels | L. Cupertino-Malheiros, A. Oudriss, F. Thébault, M. Piette, X. Feaugas |
| 24. Phase-Field Study of the History-Effect of Remelted Microstructures on Nucleation During Additive Manufacturing of Ni-Based Superalloys | Murali Uddagiri et al. |
| 25. Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V Built With Inter-Pass Deformation | A. E. Davis, A. E. Caballero, R. Biswal, S. Williams, P. B. Prangnell |
