1. Use of Reciprocal Lattice Layer Spacing in Convergent Beam Electron Diffraction Analysis

   • M. Raghavan
   • J. C. Scanlon
   • J. W. Steeds

   OriginalPaper Pages: 1299 - 1302

2. Solidification of highly undercooled Sn- Pb alloy droplets

   • M. G. Chu
   • Y. Shiohara
   • M. C. Flemings

   OriginalPaper Pages: 1303 - 1310

3. Crystallization studies in the aluminum-rich corner of the aluminum-iron-manganese system

   • W. T. Denholm
   • J. D. Esdaile
   • Bruce Ward Wilson

   OriginalPaper Pages: 1311 - 1317

4. The effect of quench rate on the microstructure, mechanical properties, and corrosion behavior of U-6 wt pct Nb

   • K. H. Eckelmeyer
   • A. D. Romig
   • L. J. Weirick

   OriginalPaper Pages: 1319 - 1330

5. Precipitation of β phase in the γ’ particles of nickel-base superalloy

   • Guo Jianting
   • D. Ranucci
   • F. Gherardi

   OriginalPaper Pages: 1331 - 1334

6. Nucleation of recrystallization in a Co- Cr- Mo alloy

   • Krishna Rajan

   OriginalPaper Pages: 1335 - 1338

7. High temperature phase chemistries and solidification mode prediction in nitrogen-strengthened austenitic stainless steels

   • Ann M. Ritter
   • Michael F. Henry
   • Warren F. Savage

   OriginalPaper Pages: 1339 - 1351

8. “Pre-martensitic” phase in nickel-aluminum thin foils

   • I. M. Robertson
   • C. M. Wayman

   OriginalPaper Pages: 1353 - 1357

9. Ternary Diffusion. Solutions with Diffusion Coefficients Linearly Dependent on Concentrations

   • Louis S. Castleman
   • Guojing Wo

   OriginalPaper Pages: 1359 - 1366

10. The Microstructure and tensile properties of a splat-quenched Al-Cu-Li-Mg-Zr alloy

    • R. E. Crooks
    • E. A. Starke

    OriginalPaper Pages: 1367 - 1377

11. Microstructure-strength relations in a hardenable stainless steel with 16 pct Cr, 1.5 pct Mo, and 5 pct Ni

    • P. J. Grobner
    • V. Blšs

    OriginalPaper Pages: 1379 - 1387

12. Tensile and Fatigue Behavior of Aluminum Oxide Fiber Reinforced Magnesium Composites: Part I. Fiber Fraction and Orientation

    • J. E. Hack
    • R. A. Page
    • G. R. Leverant

    OriginalPaper Pages: 1389 - 1396

13. Tensile and Fatigue Behavior of Aluminum Oxide Fiber Reinforced Magnesium Composites: Part II. Alloying Effects

    • R. A. Page
    • J. E. Hack
    • G. R. Leverant

    OriginalPaper Pages: 1397 - 1405

14. Residual stress evaluation with X-rays in steels having preferred orientation

    • V. M. Hauk
    • G. J. H. Vaessen

    OriginalPaper Pages: 1407 - 1414

15. The Influence of Alloying Elements on Impurity Induced Grain Boundary Embrittlement

    • D. Y. Lee
    • E. V. Barrera
    • H. L. Marcus

    OriginalPaper Pages: 1415 - 1430

16. Fatigue behavior of carburized steel with internal oxides and nonmartensitic microstructure near the surface

    • Takeshi Naito
    • Hideo Ueda
    • Masao Kikuchi

    OriginalPaper Pages: 1431 - 1436

17. Prior deformation effects on creep and fracture in inconel alloy X-750

    • M. C. Pandey
    • A. K. Mukherjee
    • D. M. R. Taplin

    OriginalPaper Pages: 1437 - 1441

18. Effect of cavitation on post-deformation tensile properties of a superplastic copper-base alloy

    • N. Ridley
    • D. W. Livesey
    • A. K. Mukherjee

    OriginalPaper Pages: 1443 - 1450

19. Structure and properties of rapidly solidified dispersion-strengthened titanium alloys: Part I. Characterization of dispersoid distribution, structure, and chemistry

    • S. M. L. Sastry
    • P. J. Meschter
    • J. E. O’neal

    OriginalPaper Pages: 1451 - 1463

20. Structure and properties of rapidly solidified dispersion strengthened titanium alloys: Part II. tensile and creep properties

    • S. M. L. Sastry
    • T. C. Peng
    • L. P. Beckerman

    OriginalPaper Pages: 1465 - 1474

21. Embrittlement of types 316l and 347 weld overlay by post-weld heat treatment and hydrogen

    • W. Tyson

    OriginalPaper Pages: 1475 - 1484

22. Hydrogen attack in an austenitic stainless steel

    • M. J. Yacamán
    • T. A. Parthasarathy
    • J. P. Hirth

    OriginalPaper Pages: 1485 - 1490

23. Identification of CuSu₅Zr phase in Cu-Zr alloys

    • M. Y-W. Lou
    • N. J. Grant

    Communication Pages: 1491 - 1493

24. Revealing deformed and recrystallized structures in beta titanium alloys

    • I. Weiss
    • F. H. Froes
    • D. Eylon

    Communication Pages: 1493 - 1496

25. Effect of niobium on austenite recrystallization and pearlite colony size in a microalloyed eutectoid steel

    • H. J. Kestenbach
    • G. S. Martins

    Communication Pages: 1496 - 1499

26. Segregation of manganese during intercritical annealing of dual phase steels

    • N. Pussegoda
    • W. R. Tyson
    • G. R. Purdy

    Communication Pages: 1499 - 1502

27. Subgrain growth in aluminum during static annealing

    • S. K. Varma
    • Barry L. Willits

    Communication Pages: 1502 - 1503

28. The driving force for chemically induced migration of molten ni films between w grains

    • Young-Duh Song
    • Duk N. Yoon

    Communication Pages: 1503 - 1505

29. Segregation and influence of boron on the impact toughness of Ti-6 pct Al-2 pct Nb-1 pct Ta-0.8 Pct mo welds and castings

    • H. Inouye
    • S. A. David

    Communication Pages: 1505 - 1507

30. Estimating hardness response of hot rolled steel by simulating cooling cycles via jominy bar testing

    • Edward A. Loria

    Communication Pages: 1507 - 1509