Ncorr: Open-Source 2D Digital Image Correlation Matlab Software | J. Blaber, B. Adair & A. Antoniou |
Structural Analysis of a Dragonfly Wing | S. R. Jongerius & D. Lentink |
A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation | Y.L. Dong & B. Pan |
Experimental and Analytical Study of Free-Fall Drop Impact Testing of Portable Products | E. Tempelman, M. M. S. Dwaikat & C. Spitás |
Correction of Scanning Electron Microscope Imaging Artifacts in a Novel Digital Image Correlation Framework | S. Maraghechi et al. |
Recent Progress in Digital Image Correlation | B. Pan |
Super Resolution Digital Image Correlation (SR-DIC): an Alternative to Image Stitching at High Magnifications | R. S. Hansen, D. W. Waldram, T. Q. Thai & R. B. Berke |
Measuring Residual Strain and Stress in Thermal Spray Coatings Using Neutron Diffractometers | N. H. Faisal, R. Ahmed, A. K. Prathuru, A. Paradowska, & T. L. Lee |
Determining Dynamic Properties of Elastomer-Dampers by Means of Impact Testing | T. Rapp, G. Jacobs, J. Berroth & J. Guenther |
Why Is It So Challenging to Measure Residual Stresses ? | G. S. Schajer, M. B. Prime & P. J. Withers |
DIC Challenge 2.0: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses | P. L. Reu et al. |
Direct Measurement of the Transverse Modulus of Carbon Fibres | S. Wong, A. P. Pierlot, A. M. Abbott & J. A. Schutz |
Residual Stresses from Incremental Hole Drilling Using Directly Deposited Thin Film Strain Gauges | S. Heikebrügge, R. Ottermann, B. Breidenstein, M.C. Wurz & F. Dencker |
Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products | B. Akhoundi & A. H. Behravesh |
The Symmpact: A Direct-Impact Hopkinson Bar Setup Suitable for Investigating Dynamic Equilibrium in Low-Impedance Materials | P. Jakkula, G. C. Ganzenmüller, S. Beisel, P. Rüthnick & S. Hiermaier |
Digital Volume Correlation: Review of Progress and Challenges | A. Buljac et al. |
J-Integral Calculation by Finite Element Processing of Measured Full-Field Surface Displacements | S.M. Barhli, M. Mostafavi, A.F. Cinar, D. Hollis & T.J. Marrow |
DIC Challenge: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses | P. L. Reu et al. |
Residual Stress Measurements in Extreme Environments for Hazardous, Layered Specimens | B. C. Benefiel et al. |
Size-Dependent Fracture Characteristics of Intermetallic Alloys | Arun Raina |
