1. Highly dispersed composite iron—Copper powders obtained from oxalates by a thermochemical method

   • N. F. Kushchevskaya

   Theory, Production Technology, and Properties of Powders and Fibers Pages: 343 - 346

2. Static-dynamic, forming of powder materials on a press—Hammer

   • A. F. Tarasov

   Theory and Process Technology of Article Forming Pages: 347 - 350

3. Plastic deformation of metal particles in gas-dynamic spraying

   • V. N. Danchenko
   • A. A. Milenin
   • A. N. Golovko

   Theory and Process Technology of Article Forming Pages: 351 - 355

4. Selective laser sintering. I. Principles, continual model

   • A. V. Ragulya

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 356 - 364

5. Selective laser sintering of compacted powders

   • N. K. Tolochko
   • K. I. Arshchinov
   • I. A. Yadroitsev

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 365 - 368

6. Sintering behavior and strength properties of stomatological porcelain—Titanium nickelide composite materials

   • N. A. Shevchenko
   • V. I. Itin

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 369 - 372

7. On the mechanism of deterioration of composite eutectic coatings by cavitation

   • S. M. Chernega

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 373 - 378

8. Computer model of sintering based on a cellular automation

   • L. O. Humenyuk
   • V. V. Lotysh
   • V. D. Rud

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 379 - 381

9. Ceramic humidity sensors based on magnesium aluminate spinel. II. Relation between the parameters of water adsorption kinetics and the service characteristics of ceramic humidity sensors in the MgAl₂O₄ system

   • I. V. Vinnik
   • V. S. Zenkov
   • I. V. Uvarova

   Refractory and Ceramics Materials Pages: 382 - 385

10. Application of conducting Si₃N₄ composites in wide-range electric radiators. III. Load life of ceramic radiators

    • V. Ya. Petrovskii

    Refractory and Ceramics Materials Pages: 386 - 389

11. Tribotechnical properties of a composite of a metal-ceramic system

    • A. I. Yuga
    • Yu. M. Vasilenkov
    • V. V. Koval'chuk

    Refractory and Ceramics Materials Pages: 390 - 393

12. Physicochemical and structural studies of materials phase equilibrium diagram for the V—Al—B system

    • Yu. B. Kuz'ma
    • N. F. Chaban
    • A. I. Smakula

    Physicochemical and Structural Investigations of Materials Pages: 394 - 396

13. Thermodynamic characteristics of self-intercalated niobium diselenide of the limiting composition

    • S. P. Gordienko
    • A. G. Druzheruchenko

    Physicochemical and Structural Investigations of Materials Pages: 397 - 399

14. Kinetics of spreading in initial stages in metallic systems with different types of interaction between components. IV. Effect of chemical reaction on the kinetics of spreading in tin—Iron group metal systems

    • V. N. Eremenko
    • L. I. Kostrova
    • N. D. Lesnik

    Physicochemical and Structural Investigations of Materials Pages: 400 - 406

15. Determination of oxygen in powders of refractory phosphides and phosphorus-containing alloys by the reduction extraction method

    • V. V. Garbuz
    • V. L. Kornilova
    • S. V. Garbuz

    Physicochemical and Structural Investigations of Materials Pages: 407 - 409

16. Desorption of gases from the surface of silicon nitride powders

    • I. I. Osipova
    • B. V. Fenochka

    Physicochemical and Structural Investigations of Materials Pages: 410 - 414

17. Formation of the structure and phase composition of titanium nitride—(Nickel—Molybdenum) materials

    • F. F. Egorov
    • V. I. Novikova
    • A. A. Mamonova

    Physicochemical and Structural Investigations of Materials Pages: 415 - 420

18. High-temperature friction and wear of titanium carbide hard alloys with an addition of a solid lubricant

    • Yu. G. Tkachenko
    • D. Z. Yurchenko
    • L. M. Murzin

    Physicochemical and Structural Investigations of Materials Pages: 421 - 424

19. Features of the electronic strucutre of different modifications of tantalum mononitrides

    • O. Yu. Zhizhun
    • Ya. V. Zaulichny
    • E. A. Zhurakovskii

    Physicochemical and Structural Investigations of Materials Pages: 425 - 431

20. Effect of structure on the fatigue strength of dispersion-hardened condensated based on copper II. Analysis of the first coefficient of the Mott—Stroh relation

    • Yu. F. Lugovskoi

    Physicochemical and Structural Investigations of Materials Pages: 432 - 437

21. Electrophysical properties of resistive thick films based on powdered Sn_0.9Sb_0.1O₂ and glasses with additions of LaB₆

    • D. E. Dyshel’

    Physicochemical and Structural Investigations of Materials Pages: 438 - 442

22. Production of parts with lengthwise grooves by pressing the working elements of a tool into the body of a compact

    • Yu. G. Dorofeev
    • V. Yu. Dorofeev
    • I. A. Kosobokov

    The Powder-Metallurgy Industry, Economics, and Organization of Production Pages: 443 - 447

23. Formation of amorphous powders of alloys of the Cu—Ti system with mechanical activation of powder mixtures

    • V. V. Savin
    • V. A. Chaika

    Exchange of Experience and Information Pages: 448 - 451

24. Automated information system “powder metallurgy” (AIS PM)

    • E. S. Kostina
    • V. A. Konoplev

    Exchange of Experience and Information Pages: 452 - 456