Abstract
The technology of heat forming of powder products with lengthwise grooves has been developed, which consists of pressing the working elements of a tool in the body of a preheated porous blank. The influence of porosity, shape, the degree of preliminary plastic deformation, and the geometric parameters of the porous blank on the area of the textured zone of product lugs has also been examined. The maximum values are attained when blanks with a porosity of 15% (without preliminary compression) and 20–25% (with compression) are used.
Similar content being viewed by others
References
V. F. Dorofeev, I. A. Kosobokov, and I. V. Mirgorodskii, “Laws of deformation of porous semifinished products used to form toothed wheels by DHP,” in:Theory and Practice of the Manufacture of Powder Materials and Products [in Russian], Novocherkassk (1993).
Yu. G. Dorofeev, “New directions in the theory and practice of dynamic hot pressing,”Poroshk. Metall., No. 9, 6–12 (1992).
I. D. Radomysel'skii, E. A. Pechentkovskii, and G. G. Serdyuk,Compression Mold for Powder Metallurgy. Design and Construction [in Russian], Tekhnika, Kiev (1970).
G. E. Mazharova, G. A. Baglyuk, and A. V. Dovydenkova,Manufacture of Products of Nonferrous Metal Powders [in Russian], Tekhnika, Kiev (1989).
Additional information
Novocherkassk State Technical University. Translated from Poroshkovaya Metallurgiya, Nos. 7–8(402), pp. 113–117, July–August, 1998.
Rights and permissions
About this article
Cite this article
Dorofeev, Y.G., Dorofeev, V.Y., Mirgorodskii, I.V. et al. Production of parts with lengthwise grooves by pressing the working elements of a tool into the body of a compact. Powder Metall Met Ceram 37, 443–447 (1998). https://doi.org/10.1007/BF02676033
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02676033