Abstract
Background
Gunshot residue (GSR) is a shred of important trace evidence which helps forensic scientists solve a huge range of incidents related to firearms. The identification of the shooter to bullet identification from a gunshot wound help reconstruct a scene of the crime.
Main body
The review of this scientific paper is based on gunshot residue, its composition, and the growing advanced technology which allow us to study about how GSR analysis help to identify and detect residues. Various methods are acquired to identify and analyze organic and inorganic residues present when ammunition is fired. The review highlights the composition of GSR, its collection methods, and analysis part which emphasize on all the methods developed so far. The use of conventional methods including colorimetric and instrumentation-based analysis and advanced technology including electrochemical technique for detecting residues from the last 50 years. Spot tests or chemical tests were performed but they degrade the sample and can sometimes cause hindrance with some other nearby material present at the crime scene. Instrumentation techniques including AAS, ICP-MS, SEM, SEM-EDX, GC, HPLC, etc. are discussed in detail. Mostly advanced electrochemical methods developed are for inorganic gunshot residues (IGSR), but some researchers worked on both residues. Also, the fabricated electrochemical cells are replaced by a single strip-based technique for easy detection. So, to combat these issues, various scientists are moving towards sensor-based methods for rapid and reliable detection. These methods are more user-friendly, sensitive, and cost-effective and provide rapid detection results.
Conclusions
This review results in the composition of GSR, its collection methods, and analysis using sophisticated methods that emphasize all the methods developed so far and it also culminates the merits and demerits of all detection methods.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Background
Most of the heinous crimes like dacoits, murder, assassination, violence, and police encounters involved the use of a firearm at a frequent rate. Thus, as an evidentiary value, a firearm plays a very crucial/important role in forensically related crime investigation (Aleksander I, 2003). Firearm-related evidence helps to get information about the scene of crime as it gives various answers to the “forensic experts like (1) whether death is because of murder, accident, self-defense, or suicide. (2) Gives a brief idea about how the crime take place. (3) Distinction can be made whether the original incident took place or not. (4) Give information and estimation of range of firing, direction, and number of firearms used. (5) Helps to determine details about the firearm injury.
This review comprises the components, collection method, and gunshot residue (GSR) analysis at the crime scene, how it is collected and sent to the forensic laboratory and analyzing GSR samples and factors which interfere with the interpretation of the gunshot sample. Important organic and inorganic gunshot residues are discussed which include their formation, distribution, and collection technique with the analytical part. The organic component includes various volatile compounds like nitroglycerine, nitro guanine, etc., while the inorganic part includes heavy metals like Pb, Ba, etc. According to the type of residue present at the crime scene, a modified type of collection and analyzing technique can be adopted (Brozek-Mucha, 2007). The areas from where these residues are collected include skin, vehicles (seats and seat backs, doors, windows, dashboards, headliners, interiors, and exteriors), nearby place of the incident, doors, windows, body parts where gunshot wounds are caused, clothing, and any surface in the immediate proximity of a firearm discharge. There are numerous techniques which are used for GSR sample collection and selecting the most appropriate one is important in ensuring maximum collection efficiency. Collection techniques include tape lifting, swabbing, vacuum, and glue lift (Dalby et al., 2010). The collected samples were then extracted in the laboratory for further analysis. The analysis technique applied for detecting GSR includes color test, instrumentation, and electro chemical sensor-based methods. Color spot tests including the paraffin test, dermal nitrate test, Walker’s test, and Marshal and Tiwari test were used along with another spot test. But these tests were found to be insufficient for analysis since they will destroy the sample and show interference with other environmental constituents. From the 1960s to the 1970s, these tests have been continuously used in several laboratories, but they are not specific for GSR thus found to be less used nowadays. Thus, the instrument-based technique for organic and inorganic constituents came which replaced the color spot test. Using this technique, bulk elemental analyses have been made possible. The technique is helpful in measuring the total amount of elements present in a sample. First came the neutron activation analysis (NAA) for detecting antimony and barium found in GSR. Then came the atomic absorbance spectroscopy (AAS) which was helpful in making a difference between the person who fired a weapon and the person who did not. It detects Pb, Ba, and Sb even if trace amounts of these metals are present. The technique gives a 90% positive result in GSR detection. Another technique, inductively coupled plasma spectroscopy (ICP), came along with a combination of mass spectrometry. It allows rapid and various element analyses but lacks sensitivity than AAS and NAA. This method has been better when extracted samples were analyzed. Then came the particle analysis technique using scanning electron microscopy-energy dispersive X-ray analysis (SEM/Edx) and found to be a more powerful technique to identify GSR (Germani, 1991; \Wolten et al., 1979). The method reveals both the morphology and chemical composition of a gunshot residue. The organic component detail, which originates from the propellant, is helpful in identifying the criminal case several times. Gas chromatography (GC) was applied for the first time which gives the presence of organic compounds like diphenyl amine (DPA), nitrocellulose (NC), nitroglycerine (NG), ethyl centralite (EC) (Espinoza & Thornton, 1994). GC combined with other spectrometries like gas chromatography-mass spectrometry (GC-MS) and ion mobility spectrometry (IMS) came as a powerful tool for detecting organic constituents. For identifying nitro diphenylamine (NDPA), 2-NDPA, 4-NDPA, EC, and other organic constituents, high-pressure liquid chromatography (HPLC) was performed. Stabilizers collected from swabbing gave positive results in identifying GSR. fourier transform infrared spectroscopy (FTIR) and Micellar electro kinetic capillary electrophoresis (MECE) helps to detect nitrocellulose and explosive, stabilizers/additives respectively in GSR. Raman spectroscopy based on vibrational frequency can image and characterize particulates present in GSR. The technique has the drawback of not analyzing the component which has metallic constituents in it. All these methods give accurate results but are costly and require highly specialized personnel to handle the instrument in the laboratory. So, to overcome this problem, electrochemical methods came as a promising tool. The method is portable and reliable, has low-cost production, and takes less time in detection in comparison to instruments and color-based tests. Increasing technology leads to advancements in techniques like electrochemical-based sensors. Various electrode-based modules were prepared for easy swabbing of samples.
Numerous works have been done on analysis of gunshot residue using different methods. Our main aim here is to compile all the developed technology for the analysis of GSR. Either from the simple colorimetric method developed since the 1900s to all the heavy instrument-based methods to the simple most reliable electrochemical-based method for both types of residue, the organic and inorganic constituents. Here, a brief view on the type of components and their collection method is also discussed (Fig. 1). The manuscript also covers the merits and demerits of the detection method.
Main body
Components of gunshot residues
Basic components in gunshot include inorganic and organic residues. Most of the organic constituents arise from propellant and lubricant material while inorganic constituents originate from primer, propellant, case, core of the jacket, and ammunition barrel as reported by many scientists (Brozek-Mucha, 2007; Dalby et al., 2010; Brozek-Mucha, 2009). The size of the particle also varies from 0.5 to 10 μm while some reported the size of 100 μm as well (Romulo & Margot, 2001). The constituents of a gunshot escape from the firearm’s open part, the vapor formed materials then get solidified and changes into particulates of varying sizes which help forensic scientists to analyze these particles. In 1250, Roger Bacon is the first one to give information about black powder which is now replaced by smokeless powder. These smokeless powders usually consist of nitroglycerine, nitrocellulose, and some single- and double-base powders. These constituents also contain various lubricants, additives, coolants, inhibitors, plasticizers, etc. (Showable & Edline, 2000). The composition of the inorganic constituent’s primer varies from manufacturer to manufacturer. In 1921, the first modern formulation came which contains lead styphnate, barium nitrate, and antimony trisulfate (Harrison & Gilroy, 1959; Basu et al., 1997). The heavy metals present in ammunition cause various harmful problems to the environment and humans too. So, some researchers produce lead-free ammunition (Gunaratnam & Homberg, 1994). Inorganic GSR came from the primer cup, bullet jacket, bullet, barrel, etc (Harris, 1995). while organic compounds were expelled from the propellant and primer part. The major constituents present at the scene of crime (SOC) including organic and inorganic gunshot residues are illustrated in Table 1.
Collection method for gunshot residue particle
Gunshot residue can be collected from various areas based on the place and type of crime whether it is a homicidal or suicidal case. The site from where the samples are collected include vehicular sites like seat belts, seats, headlines, inner or outer part of the vehicle, nearby region of the incident, body regions, clothes, target area, and the intermediate part (between target and gun) (Heard, 1997; Jalanti et al., 1999; Murdock, 1984) as shown in Fig. 2. The efficiency of collecting samples greatly affects the analysis of GSR. With time, the particles of GSR start decreasing (Douse & Smith, 1983; Jane et al., 1983; Reiss et al., 2003; Vinokurov et al., 2001; Gialamas et al., 1995). Usually, after firing, the sample starts to degrade within the first 2 h till 12 h at a high rate, depending on explicit limits. Thus, with each passing hour, there is more and more degradation of evidence as lesser GSR particles are left for accurate analysis leading to difficulty in detection sensitivity. Depending on the residue type present at the SOC whether organic or inorganic, the collection method varies. But the basic type of collection methods is of 2 types as shown in Fig. 1. The dry method includes molten wax, cellulose acetate, nylon fiber, adhesive tapes and foils, and cellophane sheets for gunshot residue particle collection, while wet methods include diluted acetic acid and hydrochloric acid and sometimes distilled water. In collecting the maximum amount of particulate matter present in a gunshot residue sample, the most appropriate method is applied. The details of various methods are given in detail below with basic idea in Table 2.
Paraffin method
In this method, a paraffin coat is poured on the victim’s hand and left there for a few minutes to entrap the residues. According to Locard’s principle, the GSR gets deposited on the paraffin and then further analyzed for the type of residue present.
Washing
This method includes the washing of the sample area using acid or sometimes water. Here, the hands of shooters or nearby areas at the scene of crime are washed with dil. HNO3 and dil. HCl and then these are collected in a plastic bottle.
Tape lift method
A simple technique which uses tape to lift the particles or residues from the region where the crime occurred. This method usually involves adhesive tapes that can easily trap the samples. The tape lifting method was found to be widely used whether it is a fingerprint examination and explosive or gunshot residue analysis. The most used technique for collecting inorganic residue from the surface including skin, hair, or some other mediums (Zeichner & Levin, 1993; Shaffer & Yi, 1999; Wrobel et al., 1998). For sampling of gunshot residue, De Gaetano et al. use 3 methods for lifting: (a) tape lift (b) glue lift, and (c) centrifugal concentration technique (De Gaetano et al., 1992). Sild et al. also gave some methods where plasma ash of tape samples proved to be an important technique to reduce organic material, resulting in easy analysis of GSR which were present on the surface of the tape lift (Sild & Pausak, 1979). But Veretto (Veretto, 1990) in 1990 says that only the plasma ash method was inefficient, using oxygen plasma ashing with an electron beam of SEM to destroy the skin epidermis cells. On hair, collection of the GSR was observed as a great task to carry out. Some say this method is unsuitable for collection, while Zeichner (Zeichner, 2001) reported that this method does not show much variation than swabbing with hair comb and solvent method; thus, the tape lift was found to be an acceptable method.
Swabbing
Swabbing means using some adsorbent surface for the collection of samples from the surface. Twi bell et al. (Twibell et al., 1982) used 8 solvents for collecting nitroglycerine from hand samples. From all the solvents, ethanol acts as the best solvent with more stability and recovery was consistent with this solvent. When organic samples were extracted, inorganic samples were extracted also; they are on the swab and then recovered for characterization by SEM/Edx in an organic solvent using membrane filtration of extract as reported. Lloyd and King (Lloyd & King, 1990; Lloyd, 1986) gave a method by which swabs of water extraction along with solid-phase extraction (SPE) act as an effective process for the organic explosive present on cotton swabs using liquid chromatography or GC-MS.
Glue lift method
Here, sticky glues were poured over the sample, dried, and then lifted from the surface containing a huge amount of evidence. In comparison with tape lift, this method was found to be more effective as it is less sticky than tape. On analysis, the sample collected from the glue lift contains less interfering particles when SEM was performed as reported by Basu et al. (Basu et al., 1997) and thus a better way to lift the sample, while De Gaetano et al. (De Gaetano et al., 1992) say glue is a less effective medium for gunshot residue sample extraction.
Vacuum lift method
The sample which needs to be collected is vacuumed up and collected onto a filtered trap which is attached to the vacuum. The collected sample is then packed in a clean trace paper and then submitted to the laboratory for further analysis. The vacuum collection of the organic gunshot residue sample using 2 types of filter that is fiberglass and Teflon was developed by Zeichner et al. (Zeichner et al., 2003) in their paper. Tape lifting followed by vacuum lifting was found to be more effective to collect residues. Mastruko (Mastruko, 2003) said that vacuum lifting can be applied above and at the depth of the cloth. Andrasko and Patterson (Andrasko & Peterson, 1991) analyzed that tape lifting was not that much suitable for collection of gunshot residue from clothing as it causes the lift of debris or other fiber materials into the sample extraction and thus vacuum lifting is more suitable than tape lifting as it interferes while performing SEM.
Collection using human mucus
Noses have hair along with mucus, i.e., liquid and some protein which can trap the particle. When a firearm gets discharged it releases gases which usually settled down on the hair of the nose, so the collection of these particles becomes important. When a person is in the region of the firearm, there comes a problem in its collection method. For airborne residue collection from nasal mucus of humans, a technique was reported by Schwartz et al. (Schwartz & Zona, 1995). He collected the sample by a simple blowing of the nose onto a 5 × 5 piece of substance and it was found that this method contains particles even after 48 h of firing and helps to determine whether the person fired or not.
Gunshot residue particle collected from hairs
When firing was done, particles settled on hair and help in determining whether the person was present near firing or not. Various methods were developed for collecting gunshot residue from hair like the comb method, swab, and tape lifting according to Zeichner et. al (Zeichner et al., 2003). Mac Creehan et al. (Mac Creehan et al., 2003) reported that when plume from the breach end exit discharge suddenly, it got collected near the front part of the face and head. Twenty-three tests were performed using a wig of human hair out of which 20 tests were found to be positive. Most of the difficulty was encountered in the case of curly hair as combs have very fine teeth. A comparison was made between residues collected from the inside of the cartridge and from combed samples. From the data, it was concluded that residue collected from the combed method and cartridges showed a good result in comparison with unburned powders.
Analysis technique or evaluation of gunshot residue
If a firearm is discharged, GSR particle left the firearm and is deposited somewhere else, so to evaluate the particle, various techniques were developed (Matricardi & Kilty, 1977). These techniques gave quantitative as well as qualitative value of components of GSR in micro or Nano quantities. From the very beginning of the 1900’s, various color tests were developed for detection of gunshot residue in various laboratories. But these color tests destroy the sample and require more amount of samples with less frequent results. So, with developing technology, various instrumental techniques have taken place of the color test for the analysis of inorganic and organic gunshot residues which are used as a frequent analyzer for these residues. This method also helps to know the distance of firing a weapon. Various types of analysis methods developed so far are shown in Fig. 3. To analyze these residues, the first color test was performed then instrumentation techniques, and to overcome these bulky instrumental techniques, later, the electrochemical methods were adopted which require less trained personnel (Wolten et al, 1977).
Flowchart showing schematic diagrammatic representation of various developed method to detect GSR. ASV, abrasive stripping voltammetry; SEM/Edx, scanning electron microscopy/energy dispersive X-ray analysis; CV, cyclic voltammetry; ICP/MS, inductively coupled plasma mass spectrometry; TLC, thin-layer chromatography; NAA, neutron activation analysis; AAS, atomic absorbance spectrometry; GC-MS, gas chromatography-mass spectroscopy; HPLC, high-pressure liquid chromatography
Color/spot test for detection of gunshot residue
These tests can be used to estimate the distance of firing and bullet hole causing the wound and gave frequent results for analyzing GSR. All the developed color tests are illustrated in Table 3 giving a brief idea of all the color tests performed to analyze GSR.
Dermal nitrate test/paraffin test
Teodoro Gonzalez, in 1933, introduced the dermal nitrate test which involves the use of diphenylamine dissolved in strong H2SO4. The name of the test itself signifies that it can be applicable to nitrates (Tagliaro et al., 2002). From partially burnt or unburnt propellant particles, these tests gave a deep blue coloration. Some other common materials also gave positive test with paraffin test and thus was not further applied. After this, the Griess test was found to be more suitable.
Griess test or Walker’s test
First described in 1858 by Peter Griess who gave the Griess reagent for the determination of nitrite ion present in solution (Griess, 1858). The test was mainly performed for nitrites present in GSR. Here, bromide paper was treated with 2-napthylamine 4:8 disulphonic acid (about 5%); then, the treated surface of the bromide paper was placed on the top and the cloth sample bearing the sample of gunshot placed over it and covered with 20% CH3COOH and then pressed with a hot electric iron. A dark red color spot indicates the presence of GSR (Walker, 1940).
Modified Griess test
The test is basically for detecting nitrites present in GSR. Here, the procedure is the same as the Griess test but includes a step where filter paper is sprayed with 2 naphthyl amine sulphanilic and citric acid. A pink color gave the indication of nitrites.
Harrison and Gilroy’s test
Harrison and Gilroy in 1959 gave this method to detect the metallic constituents present in firearm discharge residue (Harrison & Gilroy, 1959). In this test, a swab moistened with dil. HCl was used for collecting GSR from the hands. The swab was dried and then treated with tri-phenylarsonium iodide, then sodium rhodizonate was added. If the color changes to orange, antimony might be there. The second change to red gave an indication of both lead and barium, and on adding dil. HCl, the spot changing to purple indicates lead may be present. No change in color indicates the presence of barium. The test was found to be very useful in identifying the shooter or bullet hole present at scene of crime (SOC). Results that come out cannot be quantified and some other materials interfere here too. This test gave an unstable color and suddenly changed to another.
Sodium rhodizonate test
The test is specifically for Pb detection. Here, GSR samples were procured on a cloth piece from hands with 1% HCL. The reagent sodium rhodizonate in the reaction reacts with metallic divalent ions thus forming colored complexes. Depending on the pH, the color varies from blue to violet. The test can be helpful in determining lead in any form whether it is in vapor form, particulate lead, in primer residues, in lead bullet, or shot pellet. Solution colors depend on the pH, as color becomes blue-violet when neutral pH while at pH below 3 shows a very bright red coloration with orange tint for lead metal and barium shows a red-brown color at any pH (Lloyd, 1986; Steinburg et al., 1984; Bartsch et al., 1996). The test further shows positive for Ca and Sb at pH 7, but no change was seen at acidic pH.
Lunge test
Originally, it was the dermal nitrate test. Here, the reagent consists of diphenyl benzidine and is found to be carcinogenic, so in place of this, diphenylamine has been used. This gives a deep blue color in the presence of nitrites. Here, the reagent was sprayed onto the cast prepared from the paraffin cast taken from the suspect’s hands (Forensic ballistics, Chemical analysis of gunshot residues (GSR), n.d.).
Marshall and Tewari test
The method used for detecting propellant particles for estimation of a range of firing cases. Here, the desensitized photographic paper is soaked in 0.5% sulphanilic acid for 10 min. Then, after drying the sample, it is then dipped in a solution of N-α naphthyl-ethylenediamine hydrochloride in methanol for 2 min. Again, after drying, the sample is wetted with 20% acetic acid and placed under clothing. The photographic paper is then placed at the top and covered with a dry cloth and given warmth using an iron press for 5 min. A purple color spot gave the presence of nitrites. In the case of the Tewari test, 1 gm of antazoline hydrochloride was dissolved in 50 ml of water, and then, 45 ml of conc. HCL was added until the white precipitate dissolves, then filter paper soaked in acetone was placed over the sample to be tested. It is then air-dried and then deep yellow spots gave the presence of nitrites in the solution (Forensic ballistics, Chemical analysis of gunshot residues (GSR), n.d.).
Di-thio-oxamide test
The test was used basically for Cu and Ni which made the bullet jacket in the case of ammunition. Here, the reagent made should be fresh and prepared using 0.2 g of di-thio-oxamide (DTO) in 100 ml ethanol (Forensic ballistics, Chemical analysis of gunshot residues (GSR), n.d.). Then, 20 ml of ammonium hydroxide dissolved in 50 ml of distilled water and filter paper moistened with this reagent is pressed onto the hole of the bullet and dropping 3 drops to it gave the indication of Cu by a change in color to gray/greenish color, and for nickel, it will give a blue or violet color.
Instrumentation techniques for IGSR (inorganic) and OGSR (organic) gunshot residue detection
The details of all the developed instrumentation methods for the detection of organic and inorganic residues present in GSR are elaborated in Table 4.
Detection of inorganic gunshot residues
Inorganic residues consist of various elements whose detection needs to be done and these elements are bulky in nature. So, the bulk analytical technique is applied which includes NAA, ICP, AAS, and SEM/Edx.
Neutron activation analysis
First introduced in Denmark by Levi in 1936 (Minc L, 2008). It is based on the principle of optical emission spectroscopy where a sample is placed to emit light by excitation with an electric arc. Each element produces a characteristic spectrum by which it can be identified. The most sensitive, non-destructive, and effective method with a detection sensitivity of about 1 ng only and helps in determination of trace quantities of a broader range of elements (20–30 elements) simultaneously. Mainly Sb and Ba can be identified by the method as examined earlier by various scientists (McFarland & McLain, 1973; Rudzitis & Wahlgren, 1975). It came as the first instrumental technique for the detection of Sb and Ba present in gunshot residue. According to Capannesi et al. (Capannesi & Sedda, 1992), this technique helps to examine the trace elements coming from the jacket of bullet fragments and lead core. In 1975, Kilty proposed some work based on NAA as these gunshot residues transfer from hand to hand and even from hands to clothing and thus determine Ba and Sb in his experiment (Kilty, 1975).
Flameless atomic absorbance spectroscopy
The first form of AAS was developed by the Australian chemist named Sir Alan Walsh in the 1950s. The most powerful instrument for quantitative determination of trace elements in liquid (Bunsen & Kirchhoff, 1950). This method provides a total metal content of the sample and is independent of its molecular form. It works on the principle that free atoms generated in an atomizer absorbed radiation at a specific frequency. After NAA, a very sensitive and convenient technique for elemental detection of gunshot residue came. It can detect elements in nanograms and pictograms depending on the principle of where elements absorb the radiation of the same wavelength it emits when excited. First, the AAS-based detection of gunshot particles was reported in 1971. Based on the amount of element or metal constituents, AAS help to reveal the information whether a person fired or not. Results obtained using these techniques gave approximately a 90% case at success. It is a method which is very sensitive for detection of lead metal in GSR samples but gives less result in Ba and Sb amount. To determine Ba and Sb, only atomic absorption spectroscopy is not sufficient while flameless or electrochemical atomizer help to analyze these metals. Some researchers applied fluid nebulizer with flame furnace AAS to improve the detection of tin, in comparison with conventional flame AAS. When compared with conventional AAS, fluid nebulization was found to be more sensitive and with a less detection limit.
Inductively coupled plasma mass spectrometry analysis
It is an instrument which utilizes coupled plasma to ionize the sample made up of argon gas. The method is applied to detect metallic and non-metallic species in a liquid sample even at a very low concentration. It works on the principle of optical emission spectrometry where plasma energy is given to the sample from the outer region leading to the excitation of atoms; when these atoms come at the lower position, spectrum rays are released, and their photon wavelength can be measured. It is a bulk analysis technique for the analysis of elements present in the primer. The method allows very fast and multi-elemental analysis, but the limit is its sensitivity. It is more advantageous when an extracted sample was analyzed, in the GSR solution.
Scanning electron microscope X-ray emission
The first scanning electron microscope with very high resolution came in 1937 by Manfred von Ardennes. In SEM, a beam of electrons is bombarded onto a specimen and then the image is formed (von Ardennes, 1937). SEM is a powerful instrument equipped with an X-ray analyzer which emits X-ray providing a morphological feature of the element which needs to be analyzed. The instrument is non-destructive and allows the highest specificity in detection of gunshot residue. The basic principle involved here is scattered electrons which are emitted from the surface of a specimen. In 1968, research for detection of GSR elements was done using SEM/Edx first carried out in England (Ward, 1982). The identification of elements based on morphological features is very important in detecting GSR particles.
The uses of morphological and elemental indicators help to differentiate one ammunition from another and to make a difference between firearms used to discharge a round, case, and bullet material was reported by Johnson et al. (Lebiedzik & Johnson, 2000). The residue collected from any region like hair, clothing, and hands showed positive results, thus decreased the danger of accidental sample contamination. In some cases, when inorganic GSR were not there, in that case, organic components are detected. These organic components provide additional information about the sample and sometimes are helpful in making differentiation between the GSR and environmental residues. Some research was also performed using SEM/Edx for the analysis of gunshot residue along with glass fragments from the hands of shooters. This study was performed by Collins et al. (Collins et al., 2003), and according to him, these glass fragments when found along with these inorganic GSR particles, that is, fusion of Pb and Ba, help to discriminate between the two. Hell miss et al.in 1987 equipped an SEM instrument with Auger electron spectroscopy for the analysis of gunshot residue instead of using EDX (Hellmiss et al., 1987).
Detection of organic residues in GSR
Detection of inorganic residues was largely practiced in the laboratory, but many scientists start to focus on detection of organic constituents of GSR, which originate from the propellant part of a firearm.
Gas chromatography-mass spectrometry
The first combination of GC-MS came in 1959 and combining the computer-based mass spectrometer makes it more efficient in 1964 with the help of Robert E. Finnigan (Finnigan, 1964). The technique was applied to separate the mixture depending on the distribution between the stationary and the moving phases. Pyrolysis GC is an advanced form of gas chromatography where solid samples of forensic evidence are pyrolyzed at high temperatures to convert them into gaseous components. Pyrolysis GC was performed by Newlon et al. (Newlon & Booker, 1979) using only small samples of GSR. Various detectors werecombined with GC to carry out the detection of organic residues like thermal energy analysis (TEA), mass spectrometry (MS), electron capture, and flame ionization. Andrasko et al. analyzed organic components in smokeless powder that comes out of the barrel when a firearm is discharged (Andrasko et al., 2003). He combined GC with thermal energy analysis and mass spectrometry to get better results. According to Kirk bride et al., GC-MS was found to be used for the detection of various explosive compounds, from which some are used in gunshot or ammunition (Kirkbride et al., 1998). Dalby et al. analyzed smokeless powder and the capacity of solid-phase micro extraction (SPME) fiber type using gas chromatography-mass spectrometry (Dalby & Birkett, 2010). Joshi et al. evaluated the analysis of around 65 smokeless powder analyses using SPME, GC-MS, GC-micro electron detector, and ion mobility spectrometry (IMS) (Joshi et al., 2011) which further help to determine a list of various components as shown in Fig. 4. Thermal desorption gas chromatography/mass spectrometry was discussed by Stevens et al. (Stevens et al., 2016) in his experiment using ethyl centralite in blank and it is considered as a promising tool for forensic scientists. The advantage of using GC-MS without any sample preparation, pre-concentration, etc. start investigators to investigate this process in continuation. Pigou et al. reported those factors which influence the generation of molecules during the analysis (Pigou et al., 2017).
High-performance liquid chromatography
First given by Mikhail S. Tswett when he did his study on separation of plant pigments. HPLC is just the opposite of GC where the moving phase is liquid and the stationary phase is solid. Here, the liquid is passed through a column filled with solid particles (A Chromatographic and Electrophoretic Methods/A High-Performance Liquid Chromatography, n.d.). The liquid carries the sample pass through the column, different components retarded at different times. In HPLC, room temperature is sufficient to carry out the experiment. Amperometry and coulometric detection with mercury and carbon electrodes respectively to analyze NG and DPA using size exclusion chromatography for nitrocellulose were done by Lloyd (Basu & Ferris, 1980). Speers et al. (Speers et al., 1994) evaluated the use of HPLC-PMDE and GCMS for the analysis of organic propellant powder. He combined the technology with SEM/Edx to analyze inorganic residues. Dahl et al. (Dahl et al., 1985) reported the use of HPLC-EC for swabbed stabilizer detection. These stabilizers serve as an identification means of gunshot residue. Some scientists combine both high-performance liquid chromatography with pendant mercury drop electrode detector (HPLC-PMDE) and GC-TEA in combination to get better results, as these combinations lead to a strong or powerful result with more validity. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed by Wu et al. (Wu et al., 2001) for detecting methyl centralite used in GSR as a stabilizer. Even they searched that 25% of MC remain in a sample after 2 h.
Solid-phase extraction (SPE) is a technique which is used to get the concentration and purify the sample. The method developed was found to be good for EC and MC but got poor results for AK II as the recovery level calculated was not good using SPE for AK II. According to Cascio et al., the comparison was made between HPLC and micellar electro kinetic capillary chromatography (MEKC) for the analysis of organic gunshot residue. Using a UV detector in HPLC and MEKC helps to analyze the standard mixture of organic residues present in smokeless powder (Cascio et al., 2004). Mathis et al. (Mathis & McCord, 2003) evaluated the use of reverse-phase liquid chromatography electroscope ionization mass spectroscopy for comparing organic additives in smokeless gunpowder (Miryauchi et al, 1998). This method was found to be very useful in analysis of components in smokeless powder found in ammunition. According to the non-target approach, the characterization of both unburnt smokeless powder and organic components was analyzed whether the firearm is of a different caliber, brand, age, etc. These powders were analyzed by LC/atmospheric pressure chemical ionization/time of flight/mass spectrometry in both negative and positive ions. Some scientists applied polytetrafluoroethylene (PTFE) tapes for swabbing organic gunshot residue and then applying it on LC-Qtof-MS (liquid chromatography quadrupole time-of-flight mass spectrometry) for detection of these additives in gunshot residue using MS/MS mode (Benito et al., 2015).
Capillary electrophoresis
Electrophoresis uses the same criteria of migrating on a stationary phase but differs as it does not use a moving liquid phase. In this technique, an electric potential is placed across the stationary medium/phase. In the capillary electrophoresis method, the analyst moved in the electrolyte solution under the influence of an electric field. The system usually consists of vials, source, electrodes, and detector. Capillary electrophoresis along with mass spectrometry was first used by Richard D. Smith and his colleagues (Krishnan, 1967). Micellar electro kinetic capillary electrophoresis (MECE) is a technique helpful in identification of organic compounds of GSR. This method reduces the cost in comparison with SEM/Edx and separates neutral molecules like stabilizers, explosives, etc. According to Northrop (Northrop, 2001), MECE has the potential to examine organic GSR even those which cannot persist for more than an hour.
Thin-layer chromatography
The technique of TLC uses the stationary phase as solid and liquid moving phases to separate the constituents of a mixture. Here, a thin layer of silica gel or aluminum oxide is prepared which serves as the stationary phase and the sample to be analyzed may be applied directly onto the plate. The sample starts to rise based on capillary action. This way, the components of the sample are distributed between the stationary solid phase and liquid moving phase. Components with greater affinity to the moving phase travel faster than the components in the stationary phase. Retention value can be calculated using the formula:
Peak (Peak, 1980) separated nitrocellulose from nitroglycerine which confirms the presence of flakes of smokeless powder using the TLC method. Some methods were also developed for determining nitrocellulose in GSR swabs using the FTIR technique by Leggett et al. (Leggett & Lott, 1989). TLC with fluorescence was used by Meng et al. (Meng & Caddy, 1994) to detect EC along with NC and NG present on the shooter’s hand.
Raman spectroscopy
First predicted by Adolf Smekal in 1923 and named after the Indian scientist C.V Raman in 1928 (Smekal & Raman, 1923). The sample analyzed must be pure and colorless and the optical system made of glass or quartz. It consists of a source of light, sample illumination system, wavelength selector, and detector. Doty et al. (Doty et al., 2016; Doty & Lednev, 2018) made a comparison between SEM/Edx with Raman micro-spectroscopic technique where samples are collected through tape lifting. This method helps to identify and analyze various propellant components. A combination of IR with Raman enhances the variation between GSR samples from different origins but does not give effective results on real GSR samples. Bueno et al. (Bueno et al., 2018) studied and detected GSR based on the protocols implied on various particles released from automobile pads and tires. Results obtained gave specifications that the method is independent of Raman microscopes or collection software.
Electrochemical screening of gunshot residue
The current need for detecting GSR requires high sensitivity and specificity to get reliable results. So, to go beyond these heavy instrumentation techniques to some shorthanded held device which gave result within a few minutes or hour. For detecting the metallic constituents of gunshot residue, the anodic stripping voltammetry (ASV) method starts to implement. For organic constituents, cyclic voltammetry (CV) and square wave voltammetry are reported. From the acid wash, cotton swabbing and lifting using tape and adhesive can be overcome with the use of the abrasive method for gunshot residue particles. In forensic laboratories, SEM and AAS are the first choice but these methods are time consuming and costly and require high-profile personnel. To overcome this, various electrochemical-based sensors are developed and given below in detail. The electrochemical method uses potential, current, and charge measurement to determine the analyte concentration. Also, the activity of analytes can be detected using the electrochemical method. It is both a qualitative and quantitative technique based on electrochemical phenomena occurring within a medium. Even trace amounts of metal components can be analyzed. Various types of electrochemical techniques are there including ion-selective electrodes, coulometry, titrimetric method of analysis, and voltammetry method illustrated in Table 5. Analysis of GSR using the voltammetry method was very earlier practiced but got much attention over 35–40years as it is helpful in detecting the constituents very fast to other instrumental methods. The technique was found to be reliable, sensitive, simple to perform, and effective and include portability too. The result obtained is accurate with less cost. The method cannot be applied to barium metal due to its high electrochemical potential.
Electro analysis detection of inorganic gunshot residue
The most important elements found in gunshot residue containing inorganic components including lead, barium, antimony, and various other metals as shown in Table 1 used above need some advanced detection instead of color- and instrumentation-based techniques. In electrochemical detection, the most important inorganic residue particles detected were Ba, Pb, and Sb. Many researchers worked on these metals, but antimony (Sb) was the least explored element electrochemically detected. Other worked on antimony metal based on the mercury electrode. They observe that the peak of antimony was overlapped by the copper strip peak. In 1948, J. Heyrovsky (Kovaleva et al., 2000) used polarography for Ba detection, but found some limitation since the Ba metal cannot strip at a negative potential, which causes hydrolysis of aqueous solvents. Various inorganic components were studied by anodic stripping voltammetry (ASV) including Cu, Sn, Hg, Bi, Zn, and Ni. Along with several elements, only in one run lead and copper can also be detected with the help of various working electrodes.
Using ASV on graphite electrode, the first attempt of analysis of Pb and Sb was done in 1977, at Queen University, Ontario (Konanur & VanLoon, 1977; Lu et al., 2013). Here, samples were shifted to Nalgene bottles (these bottles prevent contamination), and then, voltammogram was ran using a polarography analyzer in nitric acid and hydrochloric acid. The time of deposition observed was 80–280 s. Detection time was around 2 h for lead (Pb) and antimony (Sb) determination. In 1999, Dewald et al., detected lead and antimony using Hg-film GCE and proceeded to work in 2001 for simultaneous detection of barium and lead. Samples were extracted using cotton-based Q-tips dissolved in acid for 12–16 h and a voltammogram was run in a KNO3 hydrazine sulfate solution for 180 s. A single scan detects lead and antimony on an electrode surface. Liu et al., in 1980, carry out the experiment on hanging mercury drop electrode (HMDE) using low-cost polarography for detecting multiple metals made in acetate buffer (Liu et al., 1980a; Liu et al., 1980b). Samples were collected using acid wash for 10 min with a detection limit of 1.26 to 3.74 ng. A new injection-based J-adaptor was made in Brazil in 2005 for Pb constituent detection in GSR as shown in Fig. 5. It is easy to make, install, and operate which works reliably without adjustment or maintenance. LOD for Pb is 20 μg/L. This method was the first method which uses tape lifting along with strip voltammetry (Donato & Gutz, 2005).
In 2011, cathodic adsorptive stripping voltammetry (CadSV) was used with HMDE for gunshot residue analysis for Sb and Pb detection. The LOD for Sb and Pb was 7 × 10−10 M and 6 × 110−10 M respectively. The data was compared with AAS data which uses square wave voltammetry. In 2009, Rodríguez et al. (Rodriguez et al., 2009) did work on Pb using tubular a Bi-film electrode instead of a mercury electrode. Here, Bi was collected on a carbon paste electrode with a deposition time of 60 s. LOD of Pb was detected to be 0.2mg/L. Thus, Wang’s group (Wang & Tian, 1992) uses the sensor strip for over 2 decades. O’ Mahoney et al. (Mahoney et al., 2012) use Au-modified carbon screen-printed electrode with novel the “Swipe and Scan” method for sampling as shown in Fig. 6. These strips were used to detect Pb and Cu which gave results as no contact with GSR, secondary contact, and subsequent firearm discharge. From this method, important inorganic components were analyzed like lead and antimony, but barium was not detected because of negative stripping potential as reported earlier.
Electro analysis detection of organic residues
There is a huge demand to analyze the organic constituents present in gunshot residue based on electrochemicals. Since various occupational and environmental contaminants inhibit the instrumental and color analyses, electrochemical detection in gunshot residue needs to be performed. Several researches were carried out in seawater to analyze nitro explosive compounds which consist of several organic species as reported in literature. Thus, organic metals important forensically need to be analyzed and it is outlined here in detail with all known developed protocols for electro analysis detection. So the supplementary norm for analyzing the GSR requisite needs to be taken. Organic constituents like DNT, TNT, RDX, and HMX in analyzing gunshot residue using CV at Hg-film gold electrode or GCE were used by Kissinger in 1981 (Bratin et al., 1981). Another work was done in 1995 for stabilizer akardite II (AK II), centralite I (CI), and diphenylamine (DPA) by Bergens et al. (Bergens & Danielson, 1995). A CV scan of DPA and ethyl centralite was analyzed. Dahl et al. generated detection of both types of residues by using two different analytical methods (Dahl & Lott, 1987). The method employed was organic detection by HPLC with oxidative electrochemical detection combined with graphite furnace atomic absorption spectrometry (GFAAS) to determine metal constituents Sb, Pb, and Ba. This proves to be helpful in detecting gunshot residues. Further, in 2012, Wang et al. proposed simultaneous detection of both organic and inorganic constituents present in gunshot residue (Donato & Gutz, 2005). This work helps forensic scientists to get reliable work based on CV. Here, cyclic wave voltammetry and square wave voltammetry methods were used to detect the mixture of lead (Pb), antimony (Sb), dinitro toluene (DNT), nitroglycerine (NG), and a mixture of other metals include Zn, Pb, Sb, and DPA. The system generated was even not applicable to real samples but was the first example of a hand-held instrument for both constituents of GSR.
Amperometry detection of gunshot residue
The amperometry method work on the principle of production of a current when potential is applied between the two electrodes. The basic electrode used in the amperometry sensor is the Clark oxygen electrode which consists of a platinum cathode where oxygen is reduced and silver chloride (AgCl) acts as a reference electrode. In these sensors, current response is used to detect the concentration of analyte (Jian et al., 2018; Lu, 2019).
Detection of nitrite using amperometry sensor
Nitrite is an inorganic component of gunshot residue generated from primer constituents. Nitrite presence in gunshot was detected using various color tests and instrumental techniques but gave no quantitative determination. So, to overcome this problem, an amperometry sensor was developed to determine nitrite in gunshot residue. The method employed is simple, effective, rapid, and easy to perform. Some cases of firearms include several suspects, so in these cases, fast testing of GSR is applied. In this test, flow injection analysis combined with the electrochemical method was used to detect with less contamination of the sample, great precision value, and better accuracy and less amount of reagent required. The surface area was enhanced by using platinum, palladium, gold, and silver on nano and micro scales. For the detection of nitrite, palladium particles were found to be very suitable as they have good conductive and catalytic nature. The activity of Pd can be enhanced further when they are subjected to carbon material-based nanoparticles (Promsuwan et al., 2017). The amperometry sensor firstly includes preparation of the Pd-GCMS composite as described by Sirisaeng and his colleagues with some modification (Sirisaeng et al., 2018). After this, electrodes are modified where GCE was polished with alumina slurries. Characterization of prepared GCME was done by CV from + 0.30 to + 0.10V with scan rate of 100 mVs−1 using phosphate buffer. The developed Pd-GCME was then used to detect GSR. The nitrite from the gunshot was extracted as given by Erol et al.’s method (Erol et al., 2017). The result obtained gave a good linear range of 0.10μmol/L–4mmol/L with LOD at 0.030 μm.
Conclusion
The paper highlights all the methods so far developed for detection of gunshot residue. It includes laboratory testing and on-field methods. Various color tests, instrument-based techniques ,and electrochemical techniques developed were interpreted in detail. This review emphasizes mainly on the constituents of gunshot residue detection technology, as gunshot particles play a very important role in detecting crime between the suspect, the incident, and the whole crime. Relevant information can be generated based on the developed method of gunshot residue detection protocol. These developed methods help to correlate the crime whether it is a firearm-related crime or not. The detection of organic and inorganic residues continue till today in most laboratories. Heavy instrumentation to simple handheld electrochemical-based technology is developing at a high rate. With increasing technology, various researchers are combining one technology with other for enhancing the result for easy detection of GSR. Within the inspection of gunshot residue, this paper highlights various detection methods developed till now which need to be inscribed in view to research endeavors. The paper helps the scientist to easily acquire knowledge on developed protocols for GSR detection.
Availability of data and materials
All data used in this manuscript have been completely described in this article itself.
Abbreviations
- GSR:
-
Gunshot residue
- IGSR:
-
Inorganic gunshot residues
- AAS:
-
Atomic absorbance spectrometry
- SEM/Edx:
-
Scanning electron microscopy-energy dispersive X-ray
- NAA:
-
Neutron activation analysis
- ICP:
-
Inductively coupled plasma spectroscopy
- OGSR:
-
Organic gunshot residues
- ICP/MS:
-
Inductively coupled plasma mass spectrometry
- HPLC:
-
High-pressure liquid chromatography
- GC:
-
Chromatography
- NG:
-
Nitroglycerine
- NC:
-
Nitrocellulose
- DPA:
-
Diphenyl amine
- EC:
-
Ethyl centralite
- IMS:
-
Ion mobility spectrometry
- NDPA:
-
Nitro diphenylamine
- FTIR:
-
Fourier transform infrared spectroscopy
- MECE:
-
Micellar electro kinetic capillary electrophoresis
- SOC:
-
Scene of crime
- DTO:
-
Di-thio-oxamide
- IQL:
-
Instrumental quantification limit
- INAA:
-
Instrumental neutron activation analysis
- DNT:
-
Dinitro toluene
- TEA:
-
Thermal energy analysis
- MS:
-
Mass spectroscopy
- SPME:
-
Solid-phase micro extraction
- HPLC-PMDE:
-
High-performance liquid chromatography with pendant mercury drop electrode detector
- LC-MS:
-
Liquid chromatography-tandem mass spectrometry
- HPLC-API-MS:
-
High-pressure liquid chromatography atomic pressure ionization mass spectrometry
- LC-Qtof-MS:
-
Liquid chromatography quadrupole time-of-flight mass spectrometry
- CV:
-
Cyclic voltammetry
- ASV:
-
Abrasive stripping voltammetry
- TLC:
-
Thin-layer chromatography
- LOD:
-
Limit of detection
References
Anon (2020) Chromatographic and Electrophoretic Methods. Available at: https://chem.libretexts.org/@go/page/127242 [Accessed April 30, 2021].
Aleksander I (2003) Is there a way to precisely identify that the suspect fired from the firearm? Forensic Sci Int 136(Suppl. 1):158–159
Andrasko J, Oskarson J, Stahling S (2003) Ammunition used in the latest shooting. Forensic Sci Int 136(Suppl. 1):146
Andrasko J, Peterson S (1991) A simple method for collection of gunshot residues from clothing. Sci Justice 31(3):321–330
Bartsch MR, Kobus HJ, Wainwright KP (1996) An update on the use of the sodium rhodizonate test for the detection of lead originating from firearm discharges. J Forensic Sci 41(6):1046–1051
Basu S, Boone CE, Denio DJ, Miazga RA (1997) Fundamental studies of gunshot residue deposition by glue-lift. J Forensic Sci 42(4):571–581
Basu S, Ferris S (1980) A refined collection technique for rapid search of gunshot residue particles in the SEM. Scan Electron Microsc 1:375–384
Benito S, Abrego Z, Sanchez A, Unceta N, Goicolea MA, Barrio RJ (2015) Characterization of organic gunshot residues in lead-free ammunition using a new sample collection device for liquid chromatography– quadrupole time-of-flight mass spectrometry. Forensic Sci Int 246:79–85. https://doi.org/10.1016/j.forsciint.2014.11.002
Bergens A, Danielson R (1995) Decomposition of diphenylamine in nitrocellulose-based propellants, part I: optimization of a numerical model to concentration-time data for diphenylamine and its primary degradation products deter- mined by liquid chromatography with dual-amperometric detection. Talanta 42(2):171–183. https://doi.org/10.1016/0039-9140(94)00333-n
Bratin K, Kissinger PT, Briner RC, Bruntlett CS (1981) Determination of nitro aromatic, nitramine, and nitrate ester explosive compounds in explosive mixtures and gunshot residue by liquid chromatography and reductive electrochemical detection. Anal Chim Acta 130(2):295–311. https://doi.org/10.1016/S0003-2670(01)93007-7
Briahye C, Machiroux R, Gillian G (1982) Electrochemical Detection of Gunshot Residue for Forensic. Forensic Sci Int 20:269
Briner RC, Chouchoiy S, Webster RW, Popham RE (1985) Anodic stripping voltammetry determination of antimony in gunshot residue. Anal Chim Acta 172:31–37. https://doi.org/10.1016/S0003-2670(00)82590-8
Brozek-Mucha Z (2007) Comparison of cartridge case and airborne GSR—a study of the elemental composition and morphology by means of SEM-EDX. X-Ray Spectrometry 36(6):398–407. https://doi.org/10.1002/xrs.990
Brozek-Mucha Z (2009) Distribution and properties of gunshot residue originating from a Luger 9 mm ammunition near the shooting gun. Forensic Sci Int 183(1-3):33–44. https://doi.org/10.1016/j.forsciint.2008.10.010
Brozek-Mucha Z, Jankowicz A (2001) Evaluation of the possibility of differentiation between various types of ammunition by means of GSR examination with SEM-EDX method. Forensic Sci Int 123(1):39–47. https://doi.org/10.1016/S0379-0738(01)00518-7
Bueno J, Halamkova L, Rzewski A, Lednev IK (2018) Raman micro spectroscopic mapping as a tool for detection of gunshot residue on adhesive tape. Anal Bioanal Chem. 410(28):7295–7303. https://doi.org/10.1007/s00216-018-1359-1
Wikipedia contributors. (2021). Atomic absorption spectroscopy. In Wikipedia, The Free Encyclopedia. Retrieved 06:43, April 30, 2021, from https://en.wikipedia.org/w/index.php?title=Atomic_absorption_spectroscopy&oldid=1015614693
Capannesi G, Sedda F (1992) Bullet identification: a case of a fatal hunting accident resolved by comparison of lead shot using instrumental neutron activation analysis. J Forensic Sci 37(2):657–662
Cascio O, Tritten M, Bortolotti F, Milana G, Tagliaro F (2004) Analysis of organic components of smokeless gunpowder’s: high-performance liquid chromatography vs. micellar electro kinetic capillary chromatography. Electrophoresis 25(10–11):1543–1547. https://doi.org/10.1002/elps.200305883
Charles S, Geusens N (2012) A study of the potential risk of gunshot residue transfer from special units of the police to arrested suspects. Forensic Sci Int. 216(1-3):78–81. https://doi.org/10.1016/j.forsciint.2011.08.022
Charles S, Lannoy M, Geusens N (2013) Influence of the type of fabric on the collection efficiency of gunshot residues. Forensic Sci Int 228:42–46. https://doi.org/10.1016/j.forsciint.2013.02.022
Chohra M, Beladel B, Ahmed L, Mouzai M, Akretche D, Zeghdaoui A, Mansouri A, Benamar M (2015) Study of gunshot residue by NAA and ESEM/EDX using several kinds of weapon and ammunition. J Radiat Res Appl Sci. 8(3):404–410. https://doi.org/10.1016/j.jrras.2015.02.012
Collins P, Coumbaros J, Horsley G, Lynch B, Kirkbride KP, Skinner W et al (2003) Glass-containing gunshot residue particles: a new type of highly characteristic particle. J Forensic Sci 48(3):538–553
Costa R, Motta L, Destefani C, Rodriguez R, Santo K, Aquije G, Boldrini R, Athayde G, Carneiro M, Romao W (2016) Gunshot residues (GSR) analysis of clean range ammunition using SEM/Edx, colorimetric test and ICP-MS: A comparative approach between the analytical techniques. Microchem J. 129:339–347. https://doi.org/10.1016/j.microc.2016.07.017
Dahl DB, Lott PF (1987) Electrochemical Detection of Gunshot Residue for Forensic Science. Microchim J 35(3):347–359. https://doi.org/10.1016/0026-265X(87)90122-6
Dahl DB, Slahck SC, Lott PF (1985) Gunshot residue determination by high performance liquid chromatography with electrochemical detection. Microchem J 31(2):145–160. https://doi.org/10.1016/0026-265X(85)90024-4
Dalby O, Birkett JW (2010) The evaluation of solid phase micro-extraction fiber types for the analysis of organic components in unburned propellant powders. J Chromatogram A 1217(46):7183–7188. https://doi.org/10.1016/j.chroma.2010.09.012
Dalby O, Butler D, Birkett JW (2010) Analysis of gunshot residue and associated materials: A review. J Forensic Sci 55(4):924–943. https://doi.org/10.1111/j.1556-4029.2010.01370.x
De Gaetano D, Siegel JA, Klomparens KL (1992) A comparison of 3 techniques developed for sampling and analysis of gunshot residue by scanning electron-microscopy / energy dispersive X-ray analysis (SEM EDX). J Forensic Sci 37(1):281–300
Diaz E, Souza Sarkis J, Viebig S, Saldiva P (2012) Measurement of airborne gunshot particles in a ballistics laboratory by sector field inductively coupled plasma mass spectrometry. Forensic Sci Int 214(1-3):44–47. https://doi.org/10.1016/j.forsciint.2011.07.016
Donato AD, Gutz IGR (2005) Fast Mapping of Gunshot Residues by Batch Injection Analysis with Anodic Stripping Voltammetry of Lead at the Hanging Mercury Drop Electrode. Electro Anal 17(2):105–112. https://doi.org/10.1002/elan.200303048
Doty KC, Lednev IK (2018) Raman spectroscopy for forensic purposes: recent applications for serology and gunshot residue analysis. Trends Anal Chem 103:215–222. https://doi.org/10.1016/j.trac.2017.12.003
Doty KC, Muro CK, Bueno J, Halamkova L, Lednev IK (2016) What can Raman spectroscopy do for criminalistics? J Raman Spectroscope 47(1):39–50. https://doi.org/10.1002/jrs.4826
Douse JMF, Smith RN (1983) Trace analysis of explosives and firearm discharge residues in the metropolitan police forensic science laboratory. J Eng Mater 4:169–186
Eerden S, Durmus Z, Kilia E (2011) Simultaneous determination of antimony and lead in gunshot residue by cathodic adsorptive stripping voltammetry methods. Electro Anal 23(8):1967–1974. https://doi.org/10.1002/elan.201000612
Erol OO, Erdogan BY, Onar AN (2017) Nitrate and Nitrite Determination in Gunshot Residue Samples by Capillary Electrophoresis in Acidic Run Buffer. J Forensic Sci 62(2):423–427. https://doi.org/10.1111/1556-4029.13275
Espinoza EO, Thornton J (1994) Characterization of smokeless gunpowder by means of diphenylamine stabilizer and its nitrated derivatives. Anal Chim Acta 288(1–2):57–69. https://doi.org/10.1016/0003-2670(94)85116-6
Wikipedia contributors. (2021). Gas chromatography–mass spectrometry. In Wikipedia, The Free Encyclopedia. Retrieved 06:47, April 30, 2021, from https://en.wikipedia.org/w/index.php?title=Gas_chromatography%E2%80%93mass_spectrometry&oldid=1019607682
Fojtasek L, Kmjec T (2005) Time periods of GSR particles deposition after discharge—results. Forensic Sci Int 153(2–3):132–135. https://doi.org/10.1016/j.forsciint.2004.09.127
Forensic science (2021) Forensic ballistics, Chemical analysis of gunshot residues (GSR) http://epgp.inflibnet.ac.in/epgpdata/uploads/epgp_content/forensic_science/06._forensic_ballistics/22._chemical_analysis_of_gun_shot_residues_(gsr)/et/9045_et_fsc_p6_m22_e-text.pdf
French J, Morgan R (2015) An experimental investigation of the indirect transfer and deposition of gunshot residue: Further studies carried out with SEM-EDX analysis. Forensic Sci Int 247:14–17. https://doi.org/10.1016/j.forsciint.2014.10.023
French J, Morgan R, Davy J (2014) The secondary transfer of gunshot residue: A experimental investigation carried out with SEM-EDX analysis. X-Ray Spectrom. 43(1):56–61. https://doi.org/10.1002/xrs.2498
Gassner A-L, Weyermann C (2016) LC-MS method development and comparison of sampling materials for the analysis of organic gunshot residues. Forensic Sci Int 264:47–55. https://doi.org/10.1016/j.forsciint.2016.03.022
Gerard R, McVicar M, Lindsay E, Randall E, Harvey E (2011) The long-range deposition of gunshot residue and the mechanism of its transportation. J Can Soc Forensic Sci 44:97–104. https://doi.org/10.1080/00085030.2011.10768145
Germani MS (1991) Evaluation of instrumental parameters for automated scanning electron microscopy/gunshot residue particle analysis. J Forensic Sci 36(2):331–342
Gialamas DM, Rhodes EF, Sugar Man LA (1995) Officers, their weapons and their hands: an empirical study of GSR on the hands of non-shooting police officers. J Forensic Sci 40(6):1086–1089
Gibelli D, Brandone A, Andreola S, Porta D, Giudici E, Grandi M, Cattaneo C (2010) Macroscopic, microscopic, and chemical assessment of gunshot lesions on decomposed pig skin. J Forensic Sci 55:1092–1097. https://doi.org/10.1111/j.1556-4029.2010.01378
Greely D, Weber E (2017) Transfer and distribution of gunshot residue through glass windows. J Forensic Sci 62(4):869–873. https://doi.org/10.1111/1556-4029.13331
Peter Griess (1858), Griess Test https://en.wikipedia.org/wiki/Griess.test.
Gunaratnam L, Homberg K (1994) The identification of gunshot residue particles from lead free Sintox ammunition. J Forensic Sci 39(2):532–536
Halim MI, Safian M, Elias E, Shazali S (2013) Identification of gunshot residue from trace element by using ICP/OES. Int Comput Inform. https://doi.org/10.1109/ICSI.2013.6612409
Harris A (1995) Analysis of primer residue from CCI Blazer lead free ammunition by scanning electron microscopy/energy dispersive X-ray. Forensic Sci Int. 40:27–30
Harrison HC, Gilroy R (1959) Firearms discharge residues. J Forensic Sci 4(2):184–199
Heard BJ (1997) Handbook of firearms and forensic ballistics. John Wiley and Sons, Chi Chester
Hellmiss G, Lichtenberg W, Weiss M (1987) Investigation of gunshot residues by means of auger electron spectroscopy. J Forensic Sci 32(3):747–760
Halima MI, Ahmada UK, Hooib YC, Koey M (2010) Analysis of gunshot residue deposited on cotton cloth target at close range shooting distances. A Message from the Editor-in-Chief 1 From Narcotics Case Files.
Jalanti T, Henchoz P, Gallusser A, Bonfanti MS (1999) The persistence of gunshot residue on shooters’ hands. Sci Justice 39(1):48–52. https://doi.org/10.1016/S1355-0306(99)72014-9
Jane I, Brooks PG, Douse JMF, O’Callaghan KA (1983) Detection of gunshot residues via analysis of their organic constituents. International symposium on the analysis and detection of explosives. U.S. Government Printing Office, Washington
Jian JM, Fu L, Ji J, Lin L, Guo X, Ren TL (2018) Electrochemically reduced graphene oxide/gold nanoparticles composite modified screen-printed carbon electrode for effective electrocatalytic analysis of nitrite in foods. Sens Actuators B Chem 262:125–136. https://doi.org/10.1016/j.snb.2018.01.164
Joshi M, Rigby K, Almirall JR (2011) Analysis of the headspace composition of smokeless powders by GC-MS, GC-micro ECD and ion mobility spectrometry. Forensic Sci Int 208(1-3):29–36. https://doi.org/10.1016/j.forsciint.2010.10.024
Kara I (2017) the influence of different skin types on GSR sampling by tape lifting for SEM analysis. Microsc Res Tech 80:1310–1314. https://doi.org/10.1002/jemt.22942
Khandasammy S, Rzhevskii A, Lednev I (2019) A novel two-step method for the detection of organic gunshot residue for forensic purposes: Fast fluorescence imaging followed by raman microspectroscopic identification. Anal Chem. 91(18):11731–11737. https://doi.org/10.1021/acs.analchem.9b02306
Kilty JW (1975) Activity after shooting and its effect on the retention of primer residue. J Forensic Sci 20(2):219–230
Kirkbride KP, Klass G, Pigou PE (1998) Application of solid-phase micro extraction to the recovery of organic explosives. J Forensic Sci 43(1):76–81
Konanur NK, VanLoon GW (1977) Determination of lead and antimony in firearm discharge residues on hands by anodic stripping voltammetry. Talanta 24(3):184–187. https://doi.org/10.1016/0039-9140(77)80088-X
Koon’s RD, Havekost DG, Peters CA (1987) Analysis of gunshot primer residue collection swabs using flameless atomic absorption spectrophotometry: a re-examination of extraction and instrument procedures. J Forensic Sci 32(4):846–865
Koon’s RD, Havekost DG, Peters CA (1988) Determination of barium in gunshot residue collection swabs using inductively coupled plasma-atomic emission spectrometry. J Forensic Sci 33(1):35–41
Kovaleva SV, Gladyshev VP, Chikineva NV (2000) Determination of barium by classical and alternating-current polarography. J Anal Chem. 55(12):1166–1169. https://doi.org/10.1023/A:1026667104435
Krishnan SS (1967) Firing distance determination by neutron activation analysis. J Forensic Sci 12(4):471–483
Krishnan SS (1974) Detection of gunshot residue on the hands by neutron activation and atomic absorption analysis. J Forensic Sci 19(4):789–797
Lagoo L, Schaeffer L, Szymanski D, Smith R (2010) Detection of gunshot residue in blowfly larvae and decomposing porcine tissue using inductively coupled plasma mass spectrometry (ICP-MS). J Forensic Sci 55(3):624–632. https://doi.org/10.1111/j.1556-4029.2010.01327
Laza D, Nys B, Kinder JD, Mesmaeker AKD, Moucheron C (2007) Development of a quantitative LC-MS /MS method for the analysis of common propellant powder stabilizers in gunshot residue. J Forensic Sci 52(4):842–850. https://doi.org/10.1111/j.1556-4029.2007.00490.x
Lebiedzik J, Johnson DL (2000) Rapid search and quantitative analysis of gunshot residue particles in the SEM. J Forensic Sci 45(1):83–92
Leggett LS, Lott PF (1989) Gunshot residue analysis via organic stabilizers and nitrocellulose. Microchem J 39(1):76–85. https://doi.org/10.1016/0026-265X(89)90012-X
Lindsay E, Mc Vicar M, Gerard R, Randall E, Pearson J (2011) Passive exposure and persistence of gunshot residue (GSR) on bystanders to a shooting: Comparison of shooter and bystander exposure to GSR. J Can Soc Forensic Sci. 44(3):89–96. https://doi.org/10.1080/00085030.2011.10768144
Liu JH, Lin WF, Nicol JD (1980b) Detection of N, N’-diphenyl-N, N’-dimethylurea (methyl centralite) in gunshot residues using MS-MS method. Forensic Sci Int 16(1):53–62. https://doi.org/10.1016/0379-0738(80)90179-6
Liu JH, Lin WF, Taylor L (1980a) The application of anodic stripping voltammetry to forensic Determination of lead and antimony in firearm discharge residues on hands by anodic stripping voltammetry science I. The construction of a low-cost polarograph. Forensic Sci Int 16:43
Lloyd JBF (1986) Liquid chromatography of firearm propellants traces. J Eng Mater 4(239):71
Lloyd JBF, King RM (1990) One pot processing of swabs for organic explosives and firearm residue traces. J Forensic Sci 35(4):956–959
Lopez-Lopez M, Merk V, Garcia-Ruiz C, Kneipp J (2016) Surface-enhanced Raman spectroscopy for the analysis of smokeless gunpowder’s and macroscopic gunshot residues. Anal Bioanal Chem. 408(18):4965–4973. https://doi.org/10.1007/s00216-016-9591-z
Lu L (2019) Highly sensitive detection of nitrite at a novel electrochemical sensor based on mutually stabilized Pt nanoclusters doped CoO nanohybrid. Sens Actuators B Chem 281:182–190. https://doi.org/10.1016/j.snb.2018.10.074
Lu M, Toghill KE, Phillips MA, Compton RG (2013) Anodic stripping voltammetry of antimony at unmodified carbon electrodes. Int J Environ Anal Chem 93(2):213–227. https://doi.org/10.1080/03067319.2011.629350
Mac Creehan WA, Layman MJ, Secl JD (2003) Hair combing to collect organic gunshot residues (OGSR). Forensic Sci Int 135(2):167–173. https://doi.org/10.1016/S0379-0738(03)00207-X
Mac Creehan WA, Smith KD, Rowe WF (1998) Sampling protocols for the detection of smokeless powder residues using capillary electrophoresis. J Forensic Sci 43(1):119–124
Mach MH, Pallos A, Jones PF (1978) Feasibility of gunshot residue detection via its organic Constituents. Part I: analysis of smokeless powders by combined gas chromatography chemical ionization mass spectrometry. J Forensic Sci 23(3):433–445
Mahoney AMO, Windmiller JR, Samey IA, Bandodkar IJ, Wang J (2012) “Swipe and Scan”: Integration of sampling and analysis of gunshot metal residues at screen-printed electrodes. Electrochem Commun. 23:52–55. https://doi.org/10.1016/j.elecom.2012.07.004
Maitre M, Kirkbride K, Horder M, Roux C, Beavis A (2018) Thinking beyond the lab: Organic gunshot residues in an investigative perspective. Aust J Forensic Sci. 50:659–665. https://doi.org/10.1080/00450618.2018.1457718
Mastruko V (2003) Detection of GSR particles on clothing of suspects. Forensic Sci Int 136(Suppl.1):153–154
Mathis JA, McCord BR (2003) Gradient reverse-phase liquid chromatographic- electrospray ionization mass spectrometric method for the comparison of smokeless powders. J Chromatogram 988(1):107–116. https://doi.org/10.1016/S0021-9673(02)02055-1
Matricardi VR, Kilty JW (1977) Detection of gunshot residue from the hands of a shooter. J Forensic Sci 22:725–738
McFarland RC, McLain ME (1973) Rapid neutron activation analysis for gunshot residue determination. J Forensic Sci 18(3):226–231
Minc L (2008) Neutron activation analysis. Encyclopedia of Archaeology 1669–1683. https://doi.org/10.1016/B978-012373962-9.00213-2
Meng H, Caddy B (1994) Fluorescence detection of ethyl centralite in gunshot residue. J Forensic Sci 39(5):1215–1226
Merle D, Brandone A, Amadasi A, Cattaneo C, Profumo A (2016) The detection of gunshot residues in the nasal mucus of suspected shooters. Into J Legal Med. 130(4):1045–1052. https://doi.org/10.1007/s00414-016-1375-7
Miryauchi H, Kumihashi M, Shibayama T (1998) The contribution of trace elements from smokeless powder to post firing residues. J Forensic Sci 43(1):90–96
Moran J, Bell S (2014) Skin permeation of organic gunshot residue: Implications for sampling and analysis. Anal Chem 86:6071–6079. https://doi.org/10.1021/ac501227e
Murdock J (1984) The collection of gunshot discharge residues. AFTE J 16(3):136–141
Newlon NA, Booker JL (1979) The identification of smokeless powders and their residues by Pyrolysis gas chromatography. J Forensic Sci 24(1):87–91
Northrop DM (2001) Gunshot residue analysis by micellar electro kinetic capillary electrophoresis: assessment for application to casework. Part I. J Forensic Sci 46(3):549–559
Peak SA (1980) A thin-layer chromatographic procedure for confirming the presence and Identity of smokeless powder flakes. J Forensic Sci 25(3):679–681
Pigou P, Dennison GH, Johnston M, Kobus H (2017) An investigation into artefacts formed during gas chromatography/mass spectrometry analysis of firearms propellant that contains diphenylamine as the stabilizer. Forensic Sci Int 279:140–147. https://doi.org/10.1016/j.forsciint.2017.08.013
Pillay KKS, Jester WA, Fox HA (1974) New method for the collection and analysis of gunshot residues as forensic evidence. J Forensic Sci 19(4):768–783
Promsuwan K, Thavarungkul P, Kanatharana P, Limbut W (2017) Flow injection amperometric nitrite sensor based on silver microcubics-poly (acrylic acid)/poly (vinyl alcohol) modified screen printed carbon electrode. Electrochimica Acta 232:357–369. https://doi.org/10.1016/j.electacta.2017.02.138
Raverby M (1982) Analysis of long range bullet entrance holes by atomic absorption spectrophotometry and scanning electron microscopy. J Forensic Sci 27(1):92–112
Reardon MR, MacCrehan WA, Rowe WF (2001) Comparing the additive composition of smokeless gunpowder and its handgun-fired residues. J Forensic Sci 45(6):1232–1238
Reiss ELT, Sarkis JES, Neto ON, Rodrigues C, Kakazu MH, Viebig S et al (2003) A new method for collection and identification of gunshot residues from hands of shooters. J Forensic Sci 48(6):1–6
Reyes L, Lopez C, Barrios A, Soto C, Ibanez C, Diaz F (2018) Development and application of a new nose hairs sample collection device for GSR Particles by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS). Forensic Sci Int. 290:42–48. https://doi.org/10.1016/j.forsciint.2018.06.029
Rijnders M, Stamouli A, Bolck A (2010) Comparison of GSR composition occurring at different locations around the firing position. J Forensic Sci 55(3):616–623. https://doi.org/10.1111/j.1556-4029.2009.01292.x
Roberts M, Petraco N, Gittings M (2015) Novel method for the detection of nitroglycerin in smokeless powders. Sci Justice 55:467–471. https://doi.org/10.1016/j.scijus.2015.08.001
Rodriguez JA, Ibarra IS, Galan-Vidal CA, Vega M, Barrado E (2009) Multicommutated Anodic Stripping Voltammetry at Tubular Bismuth Film Electrode for Lead Determination in Gunshot Residues. Electro Anal 21(3-5):452–458. https://doi.org/10.1002/elan.200804420
Romano S, De-giorgio F, Onofrio C, Gravina L, Abate S (2020) Characterization of gunshot residues from non-toxic ammunition and their persistence on the shooter’s hands. Int J Legal Med. 134:1083–1094
Romulo FS, Margot P (2001) Identification of gunshot residue: a critical review. Forensic Sci Int 119(2):195–211. https://doi.org/10.1016/S0379-0738(00)00428-X
Ruch RR, Buchanan JD, Guinn SC, Bellanca RH, Pinker (1964) Application of neutron activation analysis in scientific crime detection. J Forensic Sci 9:119–132
Rudzitis E, Wahlgren M (1975) Firearm residue detection by instrumental neutron activation analysis. J Forensic Sci 20(1):119–124
Sales MO, Naozuka J, Bertotti M (2012) A Forensic Study: Lead. Determination in Gunshot Residues. Microchem J 101:49–53. https://doi.org/10.1016/j.microc.2011.10.004
Sarkis JES, Neto ON, Viebig S, Durant SF (2007) Measurements of gunshot residues by sector field inductively coupled plasma mass spectrometry— further studies with pistols. Forensic Sci Int 172(1):63–66. https://doi.org/10.1016/j.forsciint.2006.12.007
Schwartz RH, Zona CA (1995) A recovery method for airborne gunshot residue retained in human nasal mucus. J Forensic Sci 40(4):659–661
Shaffer DK, Yi K (1999) A comparison of particle transfer efficiencies of two collection methods for the identification of gunshot residue on fabric surfaces using scanning electron microscopy-energy dispersive spectrometry. Scanning 21(2):99–100
Showable AJ, Edline DL (2000) Current methods in forensic gunshot residue analysis. CRC Press, Boca Raton
Sild EH, Pausak S (1979) Forensic applications of SEM / EDX. Scanning Electron Microscopy 2(185):92
Sirisaeng T, Thavarungkul P, Kanatharana P, Limbut W (2018) Flow injection non-enzymatic amperometric detection of hydrogen peroxide based on a glassy carbon electrode modified with silver particles on glassy carbon spherical powder. J Electrochem Soc 165:74–82
Smekal A, Raman CV (1923) The Optical Society, Optics and Photonics News
Speers SJ, Doolan K, McMullan J, Wallace JS (1994) Evaluation of improved methods for the recovery and detection of organic and inorganic cartridge discharge residues. J Chromatogram 674(1–2):319–327. https://doi.org/10.1016/0021-9673(94)85237-5
Steinburg M, Leist Y, Goldschmidt P, Tassa M (1984) Spectrophotometric determination of nitrites in gunpowder residues on shooters’ hands. J Forensic Sci 29(2):464–470
Stevens B, Bell S, Adams K (2016) Initial evaluation of inlet thermal desorption GCMS analysis for organic gunshot residue collected from the hands of known shooters. Forensic Chem 2:55–62
Tagliaro F, Bortolotti F, Manetto G, Pascali VL, Marigo M (2002) Dermal nitrate: An old marker of firearm discharge revisited with capillary electrophoresis. Electrophoresis 23(2):278–282. https://doi.org/10.1002/1522-2683(200202)23:2<278::AID-ELPS278>3.0.CO;2-Q
Taudte RV, Roux C, Blanes L, Horder M, Kirkbride KP, Beavis A (2016) The development and comparison of collection techniques for inorganic and organic gunshot residues. Anal Bioanal Chem 408(10):2567–2576. https://doi.org/10.1007/s00216-016-9357-7
Toal S, Niemeyer W, Conte S, Montgomery D, Ericksen SG (2014) Confirmatory analysis of field-presumptive GSR test sample using SEM/EDS. In Scanning Microscopies. https://doi.org/10.1117/12.2074212
Twibell JD, Home JM, Smalldon KW, Higgs DG, Hayes TS (1982) Assessment of solvents for the recovery of nitroglycerine from the hands using cotton swabs. J Forensic Sci 27(4):792–800
Veretto L (1990) The use of plasma ashing on sample for detection of gunshot residues with scanning electron microscopy and energy-dispersive X-ray analysis (SEM / Edx). J Forensic Sci 35(4):964–970
Vinokurov A, Zeichner A, Glattstein B, Kauffman A, Levin N, Rosengarten A et al (2001) Machine washing or brushing of clothing and its influence a shooting distance estimation. J Forensic Sci 46(4):928–933
Manfred von Ardennes (1937) Scanning electron microscope https://en.wikipedia.org/wiki/Scanning.electron.microscope.
Walker JT (1940) Bullet holes and chemical residues in shooting cases. J Crim Law Crim 31:497–521
Wang J, Tian B (1992) Screen-printed stripping voltammetry/potentiometric electrodes for decentralized testing of trace lead. Anal Chem. 64(15):1706–1709. https://doi.org/10.1021/ac00039a015
Ward DC (1982) Gunshot residue collection for scanning electron-microscopy. Scan Electron Micros 3:1031–1036
Wolten GM, Nesbitt RS, Calloway AR, Loper GL, Jones PF (1979) Particle analysis for the detection of gunshot residue I: Scanning electron microscopy/energy dispersive X-ray characterization of hand deposits from firing. J Forensic Sci 24(2):409–422
Wolten GM, Nesbitt RS, Calloway AR, Lopper GL, Jones PF (1977) Final report on particle analysis for gunshot residue detection. Report ATR- 77(7915). The Aerospace Corp, Segundo
Woolever CA, Starkey DE, Dewald HD (1999) Differential pulse anodic stripping voltammetry of barium and lead in gunshot residues. Forensic Sci Int 102(1):45–50. https://doi.org/10.1016/S0379-0738(99)00036-5
Wrobel HA, Millar JJ, Kijek M (1998) Comparison of properties of adhesive tapes, tabs, and liquids used for the collection of gunshot residue and other trace materials for SEM analysis. J Forensic Sci 43(1):178–181
Wu Z, Tong Y, Yu J, Zhang X, Yang C, Pan C, Deng X, Wen Y, Xu Y et al (2001) The utilization of MS-MS method in detection of GSRs. J Forensic Sci 46(3):495–501
Xu X, Van de Craats AM, de Bruyn PC (2004) Highly sensitive screening method for nitro aromatic, Nitra mine and nitric ester explosives by high performance liquid chromatography-atomic pressure ionization mass spectrometry (HPLC-API-MS) in forensic applications. J Forensic Sci 49(6):1–10
Yuksel B, Ozler-Yigiter A, Bora T, Sen N, Kayaalti Z (2016) GFAAS determination of antimony, barium, and lead levels in gunshot residue swabs: An application in forensic chemistry. Atomic Spectrosc 37(4):164–169. https://doi.org/10.46770/AS.2016.04.006
Zeichner A (2001) Is there a real danger of concealing gunshot residue (GSR) particles by skin debris using the tape-lift method for sampling GSR from hands? J Forensic Sci 46(6):1447–1455
Zeichner A, Eldar B, Glattstein B, Koffman A, Tamiri T, Muller D et al (2003) Vacuum collection of gunpowder residues from clothing worn by shooting suspects, and their analysis by GC / TEA, IMS, and GC / MS. J Forensic Sci 48(5):961–972
Zeichner A, Levin N (1993) Collection efficiency of gunshot residue (GSR) particles from hair and hands using double-side adhesive tape. J Forensic Sci 38(3):571–584
Acknowledgements
The author would like to thank Dr. Ashok K Chauhan for providing this opportunity for writing this article.
Author information
Authors and Affiliations
Contributions
PS is the major contributor in writing this manuscript. While SN and VK read and approved the final manuscript. The author(s) read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable
Consent for publication
Not applicable
Competing interests
No competing interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Shrivastava, P., Jain, V.K. & Nagpal, S. Gunshot residue detection technologies—a review. Egypt J Forensic Sci 11, 11 (2021). https://doi.org/10.1186/s41935-021-00223-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s41935-021-00223-9