Abstract
The plasma-resistant properties of surfaces coated with synthesized and commercial yttrium oxyfluoride materials, respectively, were investigated by exposing them to fluorine-based NF3 plasma. Yttrium oxyfluoride (YOF) powder (30.8 μm, 99.8% purity), synthesized via a solid-state wet chemical process, and commercially available YOF powder (31.0 μm, 99.9%, purity) were used as spraying materials for deposition on aluminum (Al) substrates using the atmospheric plasma spraying (APS) technique. PECVD-NF3 plasma was used to study the etching resistance of the YOF coating samples. The surface morphology and phase compositions of these coatings, and their ability to resist fluoro-based plasma etching were systematically characterized by various techniques. X-ray photoelectron spectroscopy (XPS) revealed variations in the elemental and chemical compositions of the coated surfaces of the two YOF specimens after fluorination. After exposure to plasma, the relative intensity ratio of Y–F to Y–O peaks of the synthesized and commercial YOF coatings were 1.37 and 1.35, respectively. These results indicate that the synthesized YOF coating treated with NF3 plasma offers higher resistance against plasma than the commercial YOF coating, and thus accumulates fewer contamination particles. The synthesized YOF ceramic material therefore is a promising candidate for application as chamber coating material, for example in the semiconductor manufacturing process.
Similar content being viewed by others
References
Y. Shiba, A. Teramoto, T. Goto, Y. Kishi, Y. Shirai, S. Sugawa, J. Vac Sci. Technol. A 35, 021405 (2017). https://doi.org/10.1116/1.4975143
X. Li, X. Hua, L. Ling, G. Oehrlein, E. Karwacki, B. Ji, J. Vac Sci. Technol. 22(1), 158–164 (2004). https://doi.org/10.1116/1.1633566
G. Bruno, P. Capezzuto, G. Cicala, P. Manodoro, J. Vac Sci. Technol. A 12, 690 (1994). https://doi.org/10.1116/1.578854
J.G. Langan, S.W. Rynders, B.S. Felker, E. Beck, J. Vac Sci. Technol. A 16, 2108 (1998). https://doi.org/10.1063/1.361813
H. Fukumoto, I. Fujikake, Y. Takao, K. Eriguchi, K. Ono, Plasma. Sour. Sci. Technol. 18, 045027 (2009). https://doi.org/10.1088/0963-0252/18/4/045027
S.J. Kim, J.K. Lee, Y.S. Oh, S. Kim, S.M. Lee, J. Korean Ceram. Soc. 52, 395 (2015). https://doi.org/10.4191/kcers.2015.52.6.395
K.B. Kim, D.M. Kim, J.K. Lee, Y.S. Oh, H.T. Kim, H.S. Kim, S.M. Lee, J. Kor Ceram. Soc. 46, 456–461 (2009). https://doi.org/10.4191/kcers.2009.46.5.456
D. Zhao, C. Wang, Y. Chen, Y. Wang, Int. J. Appl. Ceram. Technol. 15, 1388–1396 (2018). https://doi.org/10.1111/ijac.13011
K. Miwa, N. Takada, K. Sasaki, J. Vac, Sci. Technol A. & Vac. Surf. Film. 27, 831–835 (2009). https://doi.org/10.1116/1.3112624
Y.C. Cao, L. Zhao, J. Luo, K. Wang, Appl. Surf. Sci. 366, 304–309 (2016). https://doi.org/10.1016/j.apsusc.2016.01.092
J. Lee, S. Lee, H.N. Han, W. Kim, N.M. Hwang, Coatings. 10, 481 (2020). https://doi.org/10.3390/coatings10050481
S. Lee, J. Lee, W. Kim, N.M. Hwang, Coatings. 10, 1023 (2020). https://doi.org/10.3390/coatings10111023
T.K. Lin, W.K. Wang, S.Y. Huang, C.T. Tasi, D.S. Wuu, Nanomaterials. 7, 183 (2017). https://doi.org/10.3390/nano7070183
R. Tahara, T. Tsunoura, K. Yoshida, T. Yano, Y. Kishi, Jpn J. Appl. Phys. 57, 06JF04 (2018). https://doi.org/10.7567/JJAP.57.06JF04
H. Ashizawa, K. Yoshida, Int. J. Appl. Ceram. Technol. 19, 375–382 (2022). https://doi.org/10.1111/ijac.13880
T. Ma, T. List, V.M. Donnelly, J. Vac Sci. Technol. A 36, 031305 (2018). https://doi.org/10.1116/1.5026777
K. Miyashita, T. Tsunoura, K. Yoshida, T. Yano, Y. Kishi, Jpn J. Appl. Phys. 58, SEEC01 (2019). https://doi.org/10.7567/1347-4065/ab1636
T.K. Lin, D.S. Wuu, S.Y. Huang, W.K. Wang, Coatings. 8, 373 (2018). https://doi.org/10.3390/coatings8100373
T. Tsunoura, K. Yoshida, T. Yano, Y. Kishi, Jpn J. Appl. Phys. 56, 06HC02 (2017). https://doi.org/10.7567/JJAP.56.06HC02
D.M. Kim, Y.S. Oh, S. Kim, H.T. Kim, D.S. Lim, S.M. Lee, Thin. Solid. Film. 519, 6698–6702 (2011). https://doi.org/10.2109/jcersj2.117.863
R. Kreethi, Y.J. Hwang, H.Y. Lee, J.H. Park, K.A. Lee, Surf. Coat. Technol. 454, 129182 (2023). https://doi.org/10.1016/j.surfcoat.2022.129182
J.I. Lee, Y.J. Kim, H.R. Chae, Y.J. Kim, S.J. Park, G.S. Sin, T.B. Ha, J.H. Kim, G.H. Jeong, J.H. Ryu, J. Korean Cryst. Growth Cryst. Technol. 31(6), 276–281 (2021). https://doi.org/10.6111/JKCGCT.2021.31.6.276
Y. Seto, S. Imaura, M. Koide, United States Patent No. 20180230022. JP. 6189570, B2 (2017)
J.B. Song, E. Choi, S.G. Oh, J.T. Kim, J.Y. Yun, Coatings. 9(5), 310 (2019). https://doi.org/10.3390/coatings9050310
D.M. Kim, S.H. Lee, W.B. Alexander, K.B. Kim, Y.S. Oh, S.M. Lee, J. Am. Ceram. Soc. 94, 3455–3459 (2011). https://doi.org/10.1111/j.1551-2916.2011.04589.x
J.J. Xia, W.P. Liang, Q. Maio, D. Depla, Appl. Surf. Sci. 439, 545–551 (2018). https://doi.org/10.1016/j.apsusc.2017.12.205
Acknowledgements
This work was supported by the technology innovation program (No.20010610) funded by the Ministry of Trade, Industry & Energy (MOTIE), Korea.
Author information
Authors and Affiliations
Contributions
Conceptualization, Investigation, Methodology, Writing – original draft, R Kreethi; Investigation, Methodology, Yu-Jin Hwang; Funding acquisition, Resources, Ho-Young Lee; Authentication, Resources, Jae-Hyuk Park; Supervision, Conceptualization, Writing – review & editing, K.A. Lee. All authors have read and agreed to the published version of the manuscript..
Corresponding author
Ethics declarations
Conflict of interest
We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kreethi, R., Hwang, YJ., Lee, HY. et al. Surface analysis of yttrium oxyfluoride deposited via air plasma spraying for Erosion resistance against NF3 plasma. J. Korean Ceram. Soc. 61, 63–70 (2024). https://doi.org/10.1007/s43207-023-00332-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s43207-023-00332-2