Abstract
Closed-loop supply chain (CLSC) networks have been studied extensively in the literature due to the cost and environmental optimization in operations. A CLSC consists of forward and reverse supply chains. This paper reviews the literature of CLSC networks. 225 peer-reviewed articles that have been published in international journals from 1997 to 2020 are gathered and analysed. The aim is to answer the following main questions: (i) What is the problem domain in CLSC? (ii) Which techniques are utilized frequently in CLSC? (iii) What elements, variables, and objectives are the main focus in the field? (iv) What are the gaps in the literature? After reviewing the literature, observations are provided. Finally, the evaluations conclude suggested improvements and potential future directions in this research field.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abdallah T, Diabat A, Simchi-Levi D (2011) Sustainable supply chain design: a closed-loop formulation and sensitivity analysis. Product Plann Control 23(2–3):120–133. https://doi.org/10.1080/09537287.2011.591622
Achillas C, Vlachokostas C, Aidonis D, Moussiopoulos Ν, Iakovou E, Banias G (2010) Optimising reverse logistics network to support policy-making in the case of electrical and electronic equipment. Waste Manag 30(12):2592–2600. https://doi.org/10.1016/j.wasman.2010.06.022
Ahluwalia PK, Nema AK (2006) Multi-objective reverse logistics model for integrated computer waste management. Waste Manag Res 24(6):514–527. https://doi.org/10.1177/0734242x06067252
Ahmadi S, Amin SH (2019) An integrated chance-constrained stochastic model for a mobile phone closed-loop supply chain network with supplier selection. J Clean Prod 226:988–1003. https://doi.org/10.1016/j.jclepro.2019.04.132
Akçalı E, Çetinkaya S (2010) Quantitative models for inventory and production planning in closed-loop supply chains. Int J Prod Res 49(8):2373–2407. https://doi.org/10.1080/00207541003692021
Alimoradi A, Yussuf RM, Ismail NB, Zulkifli N (2014) Developing a fuzzy linear programming model for locating recovery facility in a closed loop supply chain. Int J Sustain Eng 8(2):122–137. https://doi.org/10.1080/19397038.2014.906514
Alumur SA, Nickel S, Saldanha-Da-Gama F, Verter V (2012) Multi-period reverse logistics network design. Eur J Oper Res 220(1):67–78. https://doi.org/10.1016/j.ejor.2011.12.045
Amin SH, Baki F (2017) A facility location model for global closed-loop supply chain network design. Appl Math Model 41:316–330. https://doi.org/10.1016/j.apm.2016.08.030
Amin SH, Zhang G (2011) A proposed mathematical model for closed-loop network configuration based on product life cycle. Int J Adv Manuf Technol 58(5–8):791–801. https://doi.org/10.1007/s00170-011-3407-2
Amin SH, Zhang G (2012) An integrated model for closed-loop supply chain configuration and supplier selection: multi-objective approach. Expert Syst Appl 39(8):6782–6791. https://doi.org/10.1016/j.eswa.2011.12.056
Amin SH, Zhang G (2013a) A three-stage model for closed-loop supply chain configuration under uncertainty. Int J Prod Res 51(5):1405–1425. https://doi.org/10.1080/00207543.2012.693643
Amin SH, Zhang G (2013b) A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return. Appl Math Model 37(6):4165–4176. https://doi.org/10.1016/j.apm.2012.09.039
Amin SH, Zhang G (2014) Closed-loop supply chain network configuration by a multi-objective mathematical model. Int J Business Performance Supply Chain Modell 6(1):1. https://doi.org/10.1504/ijbpscm.2014.058890
Amin SH, Zhang G, Akhtar P (2017) Effects of uncertainty on a tire closed-loop supply chain network. Expert Syst Appl 73:82–91. https://doi.org/10.1016/j.eswa.2016.12.024
Asad R, Hariga M, Alkhatib O (2019) Two stage closed loop supply chain models under consignment stock agreement and different procurement strategies. Appl Math Model 65:164–186. https://doi.org/10.1016/j.apm.2018.08.007
Assavapokee T, Wongthatsanekorn W (2012) Reverse production system infrastructure design for electronic products in the state of Texas. Comput Ind Eng 62(1):129–140. https://doi.org/10.1016/j.cie.2011.09.001
Atasu A, Sarvary M, Wassenhove LNV (2008) Remanufacturing as a marketing strategy. Manag Sci 54(10):1731–1746. https://doi.org/10.1287/mnsc.1080.0893
Aydin R, Kwong C, Ji P (2016) Coordination of the closed-loop supply chain for product line design with consideration of remanufactured products. J Clean Prod 114:286–298. https://doi.org/10.1016/j.jclepro.2015.05.116
Battini D, Peretti U, Persona A, Sgarbossa F (2016) Sustainable humanitarian operations: closed-loop supply chain. Int J Serv Oper Manag 25(1):65. https://doi.org/10.1504/ijsom.2016.078067
Battini D, Bogataj M, Choudhary A (2017) Closed loop supply chain (CLSC): economics, modelling, management and control. Int J Prod Econ 183:319–321. https://doi.org/10.1016/j.ijpe.2016.11.020
Beamon BM, Fernandes C (2004) Supply-chain network configuration for product recovery. Product Plann Control 15(3):270–281. https://doi.org/10.1080/09537280410001697701
Bhakthavatchalam S, Diallo C, Venkatadri U, Khatab A (2015) Quality, reliability, maintenance issues in closed-loop supply chains: a review. IFAC-PapersOnLine 48(3):460–465. https://doi.org/10.1016/j.ifacol.2015.06.124
Braz AC, Mello AMD, Gomes LADV, Nascimento PTDS (2018) The bullwhip effect in closed-loop supply chains: a systematic literature review. J Clean Prod 202:376–389. https://doi.org/10.1016/j.jclepro.2018.08.042
Cannella S, Bruccoleri M, Framinan JM (2016) Closed-loop supply chains: what reverse logistics factors influence performance? Int J Prod Econ 175:35–49. https://doi.org/10.1016/j.ijpe.2016.01.012
Cardoso SR, Barbosa-Póvoa APF, Relvas S (2013) Design and planning of supply chains with integration of reverse logistics activities under demand uncertainty. Eur J Oper Res 226(3):436–451. https://doi.org/10.1016/j.ejor.2012.11.035
Chanintrakul P, Mondragon AEC, Lalwani C, Wong CY (2009) Reverse logistics network design: a state-of-the-art literature review. Int J Business Performance Supply Chain Modell 1(1):61. https://doi.org/10.1504/ijbpscm.2009.026266
Chen J (2011) The impact of sharing customer returns information in a supply chain with and without a buyback policy. Eur J Oper Res 213(3):478–488. https://doi.org/10.1016/j.ejor.2011.03.027
Chen L-T (2014) Dynamic co-opetitive approach of a closed loop system with remanufacturing for deteriorating items in e-markets. J Manuf Syst 33(1):166–176. https://doi.org/10.1016/j.jmsy.2013.11.002
Chen J, Bell PC (2011) Coordinating a decentralized supply chain with customer returns and price-dependent stochastic demand using a buyback policy. Eur J Oper Res 212(2):293–300. https://doi.org/10.1016/j.ejor.2011.01.036
Chen J-M, Chang C-I (2012) The co-opetitive strategy of a closed-loop supply chain with remanufacturing. Transp Res E Logist Transp Rev 48(2):387–400. https://doi.org/10.1016/j.tre.2011.10.001
Chen Y, Chan F, Chung S (2014) An integrated closed-loop supply chain model with location allocation problem and product recycling decisions. Int J Prod Res 53(10):3120–3140. https://doi.org/10.1080/00207543.2014.975849
Chen Y, Chan FT, Chung S, Park W-Y (2018) Optimization of product refurbishment in closed-loop supply chain using multi-period model integrated with fuzzy controller under uncertainties. Robot Comput Integr Manuf 50:1–12. https://doi.org/10.1016/j.rcim.2017.05.005
Choi T-M, Li Y, Xu L (2013) Channel leadership, performance and coordination in closed loop supply chains. Int J Prod Econ 146(1):371–380. https://doi.org/10.1016/j.ijpe.2013.08.002
Chung S-L, Wee H-M, Yang P-C (2008) Optimal policy for a closed-loop supply chain inventory system with remanufacturing. Math Comput Model 48(5–6):867–881. https://doi.org/10.1016/j.mcm.2007.11.014
Coenen J, Heijden REVD, Riel ACV (2018) Understanding approaches to complexity and uncertainty in closed-loop supply chain management: past findings and future directions. J Clean Prod 201:1–13. https://doi.org/10.1016/j.jclepro.2018.07.216
Cruz-Rivera R, Ertel J (2009) Reverse logistics network design for the collection of end-of-life vehicles in Mexico. Eur J Oper Res 196(3):930–939. https://doi.org/10.1016/j.ejor.2008.04.041
Das K, Chowdhury AH (2012) Designing a reverse logistics network for optimal collection, recovery and quality-based product-mix planning. Int J Prod Econ 135(1):209–221. https://doi.org/10.1016/j.ijpe.2011.07.010
Dat LQ, Linh DTT, Chou S-Y, Yu VF (2012) Optimizing reverse logistic costs for recycling end-of-life electrical and electronic products. Expert Syst Appl 39(7):6380–6387. https://doi.org/10.1016/j.eswa.2011.12.031
De Giovanni P, Zaccour G (2019) A selective survey of game-theoretic models of closed-loop supply chains. 4OR 17(1):1–44. https://doi.org/10.1007/s10288-019-00399-w
Debo LG, Toktay LB, Wassenhove LNV (2005) Market segmentation and product technology selection for remanufacturable products. Manag Sci 51(8):1193–1205. https://doi.org/10.1287/mnsc.1050.0369
Demirel NÖ, Gökçen H (2008) A mixed integer programming model for remanufacturing in reverse logistics environment. Int J Adv Manuf Technol 39(11–12):1197–1206. https://doi.org/10.1007/s00170-007-1290-7
Demirel N, Özceylan E, Paksoy T, Gökçen H (2014) A genetic algorithm approach for optimising a closed-loop supply chain network with crisp and fuzzy objectives. Int J Prod Res 52(12):3637–3664. https://doi.org/10.1080/00207543.2013.879616
Devika K, Jafarian A, Nourbakhsh V (2014) Designing a sustainable closed-loop supply chain network based on triple bottom line approach: a comparison of metaheuristics hybridization techniques. Eur J Oper Res 235(3):594–615. https://doi.org/10.1016/j.ejor.2013.12.032
Diabat A, Abdallah T, Henschel A (2015) A closed-loop location-inventory problem with spare parts consideration. Comput Oper Res 54:245–256. https://doi.org/10.1016/j.cor.2013.08.023
Du F, Evans GW (2008) A bi-objective reverse logistics network analysis for post-sale service. Comput Oper Res 35(8):2617–2634. https://doi.org/10.1016/j.cor.2006.12.020
Easwaran G, Üster H (2010) A closed-loop supply chain network design problem with integrated forward and reverse channel decisions. IIE Trans 42(11):779–792. https://doi.org/10.1080/0740817x.2010.504689
El-Sayed M, Afia N, El-Kharbotly A (2010) A stochastic model for forward–reverse logistics network design under risk. Comput Ind Eng 58(3):423–431. https://doi.org/10.1016/j.cie.2008.09.040
Eskandarpour M, Zegordi SH, Nikbakhsh E (2013) A parallel variable neighborhood search for the multi-objective sustainable post-sales network design problem. Int J Prod Econ 145(1):117–131. https://doi.org/10.1016/j.ijpe.2012.10.013
Esmaeili M, Allameh G, Tajvidi T (2015) Using game theory for analysing pricing models in closed-loop supply chain from short- and long-term perspectives. Int J Prod Res 54(7):2152–2169. https://doi.org/10.1080/00207543.2015.1115907
Fahimnia B, Sarkis J, Dehghanian F, Banihashemi N, Rahman S (2013) The impact of carbon pricing on a closed-loop supply chain: an Australian case study. J Clean Prod 59:210–225. https://doi.org/10.1016/j.jclepro.2013.06.056
Fathollahi-Fard AM, Hajiaghaei-Keshteli M (2018) A stochastic multi-objective model for a closed-loop supply chain with environmental considerations. Appl Soft Comput 69:232–249. https://doi.org/10.1016/j.asoc.2018.04.055
Fazli-Khalaf M, Mirzazadeh A, Pishvaee MS (2017) A robust fuzzy stochastic programming model for the design of a reliable green closed-loop supply chain network. Hum Ecol Risk Assess Int J 23(8):2119–2149. https://doi.org/10.1080/10807039.2017.1367644
Feng Z, Wang Z, Chen Y (2014) The equilibrium of closed-loop supply chain supernetwork with time-dependent parameters. Transp Res E Logist Transp Rev 64:1–11. https://doi.org/10.1016/j.tre.2014.01.009
Fleischmann M, Bloemhof-Ruwaard JM, Dekker R, Laan EVD, Nunen JAV, Wassenhove LNV (1997) Quantitative models for reverse logistics: a review. Eur J Oper Res 103(1):1–17. https://doi.org/10.1016/s0377-2217(97)00230-0
Fleischmann M, Beullens P, Bloemhof-Ruwaard JM, Wassenhove LN (2009) The impact of product recovery on logistics network design. Prod Oper Manag 10(2):156–173. https://doi.org/10.1111/j.1937-5956.2001.tb00076.x
Francas D, Minner S (2009) Manufacturing network configuration in supply chains with product recovery. Omega 37(4):757–769. https://doi.org/10.1016/j.omega.2008.07.007
Fröhling M, Schwaderer F, Bartusch H, Rentz O (2010) Integrated planning of transportation and recycling for multiple plants based on process simulation. Eur J Oper Res 207(2):958–970. https://doi.org/10.1016/j.ejor.2010.04.031
Gaur J, Mani V (2018) Antecedents of closed-loop supply chain in emerging economies: a conceptual framework using stakeholder’s perspective. Resour Conserv Recycl 139:219–227. https://doi.org/10.1016/j.resconrec.2018.08.023
Gaur J, Subramoniam R, Govindan K, Huisingh D (2017) Closed-loop supply chain management: from conceptual to an action oriented framework on core acquisition. J Clean Prod 167:1415–1424. https://doi.org/10.1016/j.jclepro.2016.12.098
Georgiadis MC, Tsiakis P, Longinidis P, Sofioglou MK (2011) Optimal design of supply chain networks under uncertain transient demand variations. Omega 39(3):254–272. https://doi.org/10.1016/j.omega.2010.07.002
Ghahremani-Nahr J, Kian R, Sabet E (2019) A robust fuzzy mathematical programming model for the closed-loop supply chain network design and a whale optimization solution algorithm. Expert Syst Appl 116:454–471. https://doi.org/10.1016/j.eswa.2018.09.027
Ghayebloo S, Tarokh MJ, Venkatadri U, Diallo C (2015) Developing a bi-objective model of the closed-loop supply chain network with green supplier selection and disassembly of products: the impact of parts reliability and product greenness on the recovery network. J Manuf Syst 36:76–86. https://doi.org/10.1016/j.jmsy.2015.02.011
Ghobadi SN, Esmaeili M (2018) A game theory model for pricing and supplier selection in a closed-loop supply chain. Int J Procurement Manag 11(4):472. https://doi.org/10.1504/ijpm.2018.10012146
Ghomi-Avili M, Naeini SGJ, Tavakkoli-Moghaddam R, Jabbarzadeh A (2018) A fuzzy pricing model for a green competitive closed-loop supply chain network design in the presence of disruptions. J Clean Prod 188:425–442. https://doi.org/10.1016/j.jclepro.2018.03.273
Giovanni PD, Zaccour G (2014) A two-period game of a closed-loop supply chain. Eur J Oper Res 232(1):22–40. https://doi.org/10.1016/j.ejor.2013.06.032
Gomes MI, Barbosa-Povoa AP, Novais AQ (2011) Modelling a recovery network for WEEE: a case study in Portugal. Waste Manag 31(7):1645–1660. https://doi.org/10.1016/j.wasman.2011.02.023
Govindan K, Soleimani H (2017) A review of reverse logistics and closed-loop supply chains: a journal of cleaner production focus. J Clean Prod 142:371–384. https://doi.org/10.1016/j.jclepro.2016.03.126
Govindan K, Popiuc MN, Diabat A (2013) Overview of coordination contracts within forward and reverse supply chains. J Clean Prod 47:319–334. https://doi.org/10.1016/j.jclepro.2013.02.001
Govindan K, Soleimani H, Kannan D (2015) Reverse logistics and closed-loop supply chain: a comprehensive review to explore the future. Eur J Oper Res 240(3):603–626. https://doi.org/10.1016/j.ejor.2014.07.012
Guide VDR, Wassenhove LNV (2009) OR FORUM—the evolution of closed-loop supply chain research. Oper Res 57(1):10–18. https://doi.org/10.1287/opre.1080.0628
Gungor A, Gupta SM (1999) Issues in environmentally conscious manufacturing and product recovery: a survey. Comput Ind Eng 36(4):811–853. https://doi.org/10.1016/s0360-8352(99)00167-9
Guo Y, Ma J (2013) Research on game model and complexity of retailer collecting and selling in closed-loop supply chain. Appl Math Model 37(7):5047–5058. https://doi.org/10.1016/j.apm.2012.09.034
Gupta A, Evans GW (2009) A goal programming model for the operation of closed-loop supply chains. Eng Optim 41(8):713–735. https://doi.org/10.1080/03052150902802242
Gurtu A, Searcy C, Jaber M (2015) An analysis of keywords used in the literature on green supply chain management. Manag Res Rev 38(2):166–194. https://doi.org/10.1108/mrr-06-2013-0157
Hajipour V, Tavana M, Caprio DD, Akhgar M, Jabbari Y (2019) An optimization model for traceable closed-loop supply chain networks. Appl Math Model 71:673–699. https://doi.org/10.1016/j.apm.2019.03.007
Hamdouch Y, Qiang QP, Ghoudi K (2016) A closed-loop supply chain equilibrium model with random and Price-sensitive demand and return. Netw Spat Econ 17(2):459–503. https://doi.org/10.1007/s11067-016-9333-y
Hammond D, Beullens P (2007) Closed-loop supply chain network equilibrium under legislation. Eur J Oper Res 183(2):895–908. https://doi.org/10.1016/j.ejor.2006.10.033
Hasani A, Zegordi SH, Nikbakhsh E (2012) Robust closed-loop supply chain network design for perishable goods in agile manufacturing under uncertainty. Int J Prod Res 50(16):4649–4669. https://doi.org/10.1080/00207543.2011.625051
Hassini E, Surti C, Searcy C (2012) A literature review and a case study of sustainable supply chains with a focus on metrics. Int J Prod Econ 140(1):69–82. https://doi.org/10.1016/j.ijpe.2012.01.042
Hatefi S, Jolai F (2014) Robust and reliable forward–reverse logistics network design under demand uncertainty and facility disruptions. Appl Math Model 38(9–10):2630–2647. https://doi.org/10.1016/j.apm.2013.11.002
Heese HS, Cattani K, Ferrer G, Gilland W, Roth AV (2005) Competitive advantage through take-back of used products. Eur J Oper Res 164(1):143–157. https://doi.org/10.1016/j.ejor.2003.11.008
Hong I-H, Yeh J-S (2012) Modeling closed-loop supply chains in the electronics industry: A retailer collection application. Transp Res E Logist Transp Rev 48(4):817–829. https://doi.org/10.1016/j.tre.2012.01.006
Hu T-L, Sheu J-B, Huang K-H (2002) A reverse logistics cost minimization model for the treatment of hazardous wastes. Transp Res E Logist Transp Rev 38(6):457–473. https://doi.org/10.1016/s1366-5545(02)00020-0
Huang Y, Wang Z (2017) Closed-loop supply chain models with product take-back and hybrid remanufacturing under technology licensing. J Clean Prod 142:3917–3927. https://doi.org/10.1016/j.jclepro.2016.10.065
Huang M, Song M, Lee LH, Ching WK (2013) Analysis for strategy of closed-loop supply chain with dual recycling channel. Int J Prod Econ 144(2):510–520. https://doi.org/10.1016/j.ijpe.2013.04.002
Ilgin MA, Gupta SM (2010) Environmentally conscious manufacturing and product recovery (ECMPRO): A review of the state of the art. J Environ Manag 91(3):563–591. https://doi.org/10.1016/j.jenvman.2009.09.037
Inderfurth K (2005) Impact of uncertainties on recovery behavior in a remanufacturing environment. Int J Phys Distrib Logist Manag 35(5):318–336. https://doi.org/10.1108/09600030510607328
Islam MT, Huda N (2018) Reverse logistics and closed-loop supply chain of waste electrical and electronic equipment (WEEE)/E-waste: a comprehensive literature review. Resour Conserv Recycl 137:48–75. https://doi.org/10.1016/j.resconrec.2018.05.026
Jamsa P (2009) Opportunities for research in reverse logistics networks: a literature review. Int J Manag Enterp Dev 6(4):433. https://doi.org/10.1504/ijmed.2009.024234
Jayaraman V (2006) Production planning for closed-loop supply chains with product recovery and reuse: an analytical approach. Int J Prod Res 44(5):981–998. https://doi.org/10.1080/00207540500250507
Jayaraman V, Guide VDR, Srivastava R (1999) A closed-loop logistics model for remanufacturing. J Oper Res Soc 50(5):497–508. https://doi.org/10.1057/palgrave.jors.2600716
Jena SK, Sarmah SP (2016) Future aspect of acquisition management in closed-loop supply chain. Int J Sustain Eng 9(4):266–276. https://doi.org/10.1080/19397038.2016.1181120
Jindal A, Sangwan KS (2013) Closed loop supply chain network design and optimisation using fuzzy mixed integer linear programming model. Int J Prod Res 52(14):4156–4173. https://doi.org/10.1080/00207543.2013.861948
Kai K, Wang X, Ma Y (2016) A Multi-objective collection-distribution center location and allocation problem in a closed-loop supply chain for the Chinese Beer Industry. https://doi.org/10.20944/preprints201610.0037.v1
Kannan G, Haq AN, Devika M (2008) Analysis of closed loop supply chain using genetic algorithm and particle swarm optimisation. Int J Prod Res 47(5):1175–1200. https://doi.org/10.1080/00207540701543585
Kannan G, Sasikumar P, Devika K (2010) A genetic algorithm approach for solving a closed loop supply chain model: a case of battery recycling. Appl Math Model 34(3):655–670. https://doi.org/10.1016/j.apm.2009.06.021
Kannan D, Diabat A, Alrefaei M, Govindan K, Yong G (2012) A carbon footprint based reverse logistics network design model. Resour Conserv Recycl 67:75–79. https://doi.org/10.1016/j.resconrec.2012.03.005
Kara SS, Onut S (2010) A two-stage stochastic and robust programming approach to strategic planning of a reverse supply network: the case of paper recycling. Expert Syst Appl 37(9):6129–6137. https://doi.org/10.1016/j.eswa.2010.02.116
Kaya O, Urek B (2016) A mixed integer nonlinear programming model and heuristic solutions for location, inventory and pricing decisions in a closed loop supply chain. Comput Oper Res 65:93–103. https://doi.org/10.1016/j.cor.2015.07.005
Kazemi N, Modak NM, Govindan K (2018) A review of reverse logistics and closed loop supply chain management studies published in IJPR: a bibliometric and content analysis. Int J Prod Res 57(15–16):4937–4960. https://doi.org/10.1080/00207543.2018.1471244
Ketzenberg M (2009) The value of information in a capacitated closed loop supply chain. Eur J Oper Res 198(2):491–503. https://doi.org/10.1016/j.ejor.2008.09.028
Keyvanshokooh E, Fattahi M, Seyed-Hosseini S, Tavakkoli-Moghaddam R (2013) A dynamic pricing approach for returned products in integrated forward/reverse logistics network design. Appl Math Model 37(24):10182–10202. https://doi.org/10.1016/j.apm.2013.05.042
Kim S, Jeong B (2016) Closed-loop supply chain planning model for a photovoltaic system manufacturer with internal and external recycling. Sustainability 8(7):596. https://doi.org/10.3390/su8070596
Kim K, Song I, Kim J, Jeong B (2006) Supply planning model for remanufacturing system in reverse logistics environment. Comput Ind Eng 51(2):279–287. https://doi.org/10.1016/j.cie.2006.02.008
Kim J, Chung BD, Kang Y, Jeong B (2018) Robust optimization model for closed-loop supply chain planning under reverse logistics flow and demand uncertainty. J Clean Prod 196:1314–1328. https://doi.org/10.1016/j.jclepro.2018.06.157
Ko HJ, Evans GW (2007) A genetic algorithm-based heuristic for the dynamic integrated forward/reverse logistics network for 3PLs. Comput Oper Res 34(2):346–366. https://doi.org/10.1016/j.cor.2005.03.004
Krapp M, Kraus JB (2017) Coordination contracts for reverse supply chains: a state-of-the-art review. J Bus Econ 89(7):747–792. https://doi.org/10.1007/s11573-017-0887-z
Krikke H (2011) Impact of closed-loop network configurations on carbon footprints: a case study in copiers. Resour Conserv Recycl 55(12):1196–1205. https://doi.org/10.1016/j.resconrec.2011.07.001
Krikke H, Hofenk D, Wang Y (2013) Revealing an invisible giant: a comprehensive survey into return practices within original (closed-loop) supply chains. Resour Conserv Recycl 73:239–250. https://doi.org/10.1016/j.resconrec.2013.02.009
Kumar VV, Chan FT (2011) A superiority search and optimisation algorithm to solve RFID and an environmental factor embedded closed loop logistics model. Int J Prod Res 49(16):4807–4831. https://doi.org/10.1080/00207543.2010.503201
Lambert S, Riopel D, Abdul-Kader W (2011) A reverse logistics decisions conceptual framework. Comput Ind Eng 61(3):561–581. https://doi.org/10.1016/j.cie.2011.04.012
Lapko Y, Trianni A, Nuur C, Masi D (2018) In pursuit of closed-loop supply chains for critical materials: an exploratory study in the green energy sector. J Ind Ecol 23(1):182–196. https://doi.org/10.1111/jiec.12741
Lashkari RS, Duan Y (2007) Designing a Closed-Loop Supply Chain for Aluminum Engine Manufacturing. In: Proceedings of the 2nd International Conference on Operations and Supply Chain Management. https://scholar.utcc.ac.th/handle/6626976254/925
Lashkari RS, Zhang H (2014) Modeling and analysis of a reverse supply chain network for lead-acid battery manufacturing. Operations Supply Chain Manag Int J 14. https://doi.org/10.31387/oscm010006
Lee C, Chan T (2009) Development of RFID-based reverse logistics system. Expert Syst Appl 36(5):9299–9307. https://doi.org/10.1016/j.eswa.2008.12.002
Lee D-H, Dong M (2009) Dynamic network design for reverse logistics operations under uncertainty. Transp Res E Logist Transp Rev 45(1):61–71. https://doi.org/10.1016/j.tre.2008.08.002
Lee J-E, Gen M, Rhee K-G (2009) Network model and optimization of reverse logistics by hybrid genetic algorithm. Comput Ind Eng 56(3):951–964. https://doi.org/10.1016/j.cie.2008.09.021
Leng M, Parlar M (2005) Game theoretic applications in supply chain management: a review. INFOR: Inform Syst Operat Res 43(3):187–220. https://doi.org/10.1080/03155986.2005.11732725
Li Y, Huang G, Nie X, Nie S (2008) A two-stage fuzzy robust integer programming approach for capacity planning of environmental management systems. Eur J Oper Res 189(2):399–420. https://doi.org/10.1016/j.ejor.2007.05.014
Lieckens K, Vandaele N (2007) Reverse logistics network design with stochastic lead times. Comput Oper Res 34(2):395–416. https://doi.org/10.1016/j.cor.2005.03.006
Linton JD, Klassen R, Jayaraman V (2007) Sustainable supply chains: an introduction. J Oper Manag 25(6):1075–1082. https://doi.org/10.1016/j.jom.2007.01.012
Listeş O (2007) A generic stochastic model for supply-and-return network design. Comput Oper Res 34(2):417–442. https://doi.org/10.1016/j.cor.2005.03.007
Lu Z, Bostel N (2007) A facility location model for logistics systems including reverse flows: the case of remanufacturing activities. Comput Oper Res 34(2):299–323. https://doi.org/10.1016/j.cor.2005.03.002
Lundin JF (2012) Redesigning a closed-loop supply chain exposed to risks. Int J Prod Econ 140(2):596–603. https://doi.org/10.1016/j.ijpe.2011.01.010
Ma J, Wang H (2014) Complexity analysis of dynamic noncooperative game models for closed-loop supply chain with product recovery. Appl Math Model 38(23):5562–5572. https://doi.org/10.1016/j.apm.2014.02.027
Majumder P, Groenevelt H (2009) Competition in remanufacturing. Prod Oper Manag 10(2):125–141. https://doi.org/10.1111/j.1937-5956.2001.tb00074.x
Melo M, Nickel S, Saldanha-Da-Gama F (2009) Facility location and supply chain management – a review. Eur J Oper Res 196(2):401–412. https://doi.org/10.1016/j.ejor.2008.05.007
Min H, Ko H-J (2008) The dynamic design of a reverse logistics network from the perspective of third-party logistics service providers. Int J Prod Econ 113(1):176–192. https://doi.org/10.1016/j.ijpe.2007.01.017
Min H, Ko HJ, Ko CS (2006a) A genetic algorithm approach to developing the multi-echelon reverse logistics network for product returns. Omega 34(1):56–69. https://doi.org/10.1016/j.omega.2004.07.025
Min H, Ko CS, Ko HJ (2006b) The spatial and temporal consolidation of returned products in a closed-loop supply chain network. Comput Ind Eng 51(2):309–320. https://doi.org/10.1016/j.cie.2006.02.010
Mirakhorli A (2013) Fuzzy multi-objective optimization for closed loop logistics network design in bread-producing industries. Int J Adv Manuf Technol 70(1–4):349–362. https://doi.org/10.1007/s00170-013-5264-7
Mitra S (2012) Inventory management in a two-echelon closed-loop supply chain with correlated demands and returns. Comput Ind Eng 62(4):870–879. https://doi.org/10.1016/j.cie.2011.12.008
Mitra S, Webster S (2008) Competition in remanufacturing and the effects of government subsidies. Int J Prod Econ 111(2):287–298. https://doi.org/10.1016/j.ijpe.2007.02.042
Mutha A, Pokharel S (2009) Strategic network design for reverse logistics and remanufacturing using new and old product modules. Comput Ind Eng 56(1):334–346. https://doi.org/10.1016/j.cie.2008.06.006
Nallusamy S, Balakannan K, Chakraborty P, Majumdar G (2018) A mixed-integer linear programming model of closed loop supply chain network for manufacturing system. Int J Eng Res Afr 35:198–207. https://doi.org/10.4028/www.scientific.net/jera.35.198
Neto JQF, Walther G, Bloemhof J, Nunen JV, Spengler T (2009) A methodology for assessing eco-efficiency in logistics networks. Eur J Oper Res 193(3):670–682. https://doi.org/10.1016/j.ejor.2007.06.056
Özceylan E, Paksoy T (2013a) A mixed integer programming model for a closed-loop supply-chain network. Int J Prod Res 51(3):718–734. https://doi.org/10.1080/00207543.2012.661090
Özceylan E, Paksoy T (2013b) Interactive fuzzy programming approaches to the strategic and tactical planning of a closed-loop supply chain under uncertainty. Int J Prod Res 52(8):2363–2387. https://doi.org/10.1080/00207543.2013.865852
Özceylan E, Paksoy T, Bektaş T (2014) Modeling and optimizing the integrated problem of closed-loop supply chain network design and disassembly line balancing. Transp Res E Logist Transp Rev 61:142–164. https://doi.org/10.1016/j.tre.2013.11.001
Özkır V, Başlıgil H (2012) Modelling product-recovery processes in closed-loop supply-chain network design. Int J Prod Res 50(8):2218–2233. https://doi.org/10.1080/00207543.2011.575092
Özkır V, Başlıgil H (2013) Multi-objective optimization of closed-loop supply chains in uncertain environment. J Clean Prod 41:114–125. https://doi.org/10.1016/j.jclepro.2012.10.013
Paksoy T, Bektaş T, Özceylan E (2011) Operational and environmental performance measures in a multi-product closed-loop supply chain. Transp Res E Logist Transp Rev 47(4):532–546. https://doi.org/10.1016/j.tre.2010.12.001
Pan Z, Tang J, Liu O (2009) Capacitated dynamic lot sizing problems in closed-loop supply chain. Eur J Oper Res 198(3):810–821. https://doi.org/10.1016/j.ejor.2008.10.018
Papen P, Amin SH (2018) Network configuration of a bottled water closed-loop supply chain with green supplier selection. J Remanufact 9(2):109–127. https://doi.org/10.1007/s13243-018-0061-y
Pati R, Vrat P, Kumar P (2008) A goal programming model for paper recycling system☆. Omega 36(3):405–417. https://doi.org/10.1016/j.omega.2006.04.014
Patne K, Shukla N, Kiridena S, Tiwari MK (2018) Solving closed-loop supply chain problems using game theoretic particle swarm optimisation. Int J Prod Res 56(17):5836–5853. https://doi.org/10.1080/00207543.2018.1478149
Pazhani S, A, R. R. (2018) A bi-criteria model for closed loop supply chain network design. Int J Oper Res 1(1):1. https://doi.org/10.1504/ijor.2018.10008699
Peidro D, Mula J, Poler R, Lario F-C (2008) Quantitative models for supply chain planning under uncertainty: a review. Int J Adv Manuf Technol 43(3–4):400–420. https://doi.org/10.1007/s00170-008-1715-y
Pishvaee M, Torabi S (2010) A possibilistic programming approach for closed-loop supply chain network design under uncertainty. Fuzzy Sets Syst 161(20):2668–2683. https://doi.org/10.1016/j.fss.2010.04.010
Pishvaee MS, Jolai F, Razmi J (2009a) A stochastic optimization model for integrated forward/reverse logistics network design. J Manuf Syst 28(4):107–114. https://doi.org/10.1016/j.jmsy.2010.05.001
Pishvaee MS, Kianfar K, Karimi B (2009b) Reverse logistics network design using simulated annealing. Int J Adv Manuf Technol 47(1–4):269–281. https://doi.org/10.1007/s00170-009-2194-5
Pishvaee MS, Farahani RZ, Dullaert W (2010) A memetic algorithm for bi-objective integrated forward/reverse logistics network design. Comput Oper Res 37(6):1100–1112. https://doi.org/10.1016/j.cor.2009.09.018
Pishvaee MS, Rabbani M, Torabi SA (2011) A robust optimization approach to closed-loop supply chain network design under uncertainty. Appl Math Model 35(2):637–649. https://doi.org/10.1016/j.apm.2010.07.013
Pokharel S, Mutha A (2009) Perspectives in reverse logistics: a review. Resour Conserv Recycl 53(4):175–182. https://doi.org/10.1016/j.resconrec.2008.11.006
Pourjavad E, Mayorga RV (2018) An optimization model for network design of a closed-loop supply chain: a study for a glass manufacturing industry. Int J Manag Sci Eng Manag 14(3):169–179. https://doi.org/10.1080/17509653.2018.1512387
Qiang Q, Ke K, Anderson T, Dong J (2013) The closed-loop supply chain network with competition, distribution channel investment, and uncertainties. Omega 41(2):186–194. https://doi.org/10.1016/j.omega.2011.08.011
Qin Z, Ji X (2010) Logistics network design for product recovery in fuzzy environment. Eur J Oper Res 202(2):479–490. https://doi.org/10.1016/j.ejor.2009.05.036
Rad RS, Nahavandi N (2018) A novel multi-objective optimization model for integrated problem of green closed loop supply chain network design and quantity discount. J Clean Prod 196:1549–1565. https://doi.org/10.1016/j.jclepro.2018.06.034
Ramezani M, Jafari A (2018) A bi-objective mathematical model for designing a closed-loop supply chain network (case study: Tyre manufacturing company). Int J Manag Concepts Philos 11(4):433. https://doi.org/10.1504/ijmcp.2018.096078
Ramezani M, Bashiri M, Tavakkoli-Moghaddam R (2012) A robust design for a closed-loop supply chain network under an uncertain environment. Int J Adv Manuf Technol 66(5–8):825–843. https://doi.org/10.1007/s00170-012-4369-8
Ramezani M, Bashiri M, Tavakkoli-Moghaddam R (2013) A new multi-objective stochastic model for a forward/reverse logistic network design with responsiveness and quality level. Appl Math Model 37(1–2):328–344. https://doi.org/10.1016/j.apm.2012.02.032
Ramezani M, Kimiagari AM, Karimi B (2014a) Closed-loop supply chain network design: a financial approach. Appl Math Model 38(15–16):4099–4119. https://doi.org/10.1016/j.apm.2014.02.004
Ramezani M, Kimiagari AM, Karimi B, Hejazi TH (2014b) Closed-loop supply chain network design under a fuzzy environment. Knowl-Based Syst 59:108–120. https://doi.org/10.1016/j.knosys.2014.01.016
Rezaee MJ, Yousefi S, Hayati J (2016) A multi-objective model for closed-loop supply chain optimization and efficient supplier selection in a competitive environment considering quantity discount policy. J Ind Eng Int 13(2):199–213. https://doi.org/10.1007/s40092-016-0178-2
Roghanian E, Cheraghalipour A (2019) Addressing a set of meta-heuristics to solve a multi-objective model for closed-loop citrus supply chain considering CO2 emissions. J Clean Prod 239:118081. https://doi.org/10.1016/j.jclepro.2019.118081
Rouf S, Zhang G (2011) Supply planning for a closed-loop system with uncertain demand and return. Int J Oper Res 10(4):380. https://doi.org/10.1504/ijor.2011.039709
Rubio S, Chamorro A, Miranda FJ (2008) Characteristics of the research on reverse logistics (1995–2005). Int J Prod Res 46(4):1099–1120. https://doi.org/10.1080/00207540600943977
Salema MI, Póvoa APB, Novais AQ (2006) A warehouse-based design model for reverse logistics. J Oper Res Soc 57(6):615–629. https://doi.org/10.1057/palgrave.jors.2602035
Salema MIG, Barbosa-Povoa AP, Novais AQ (2007) An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty. Eur J Oper Res 179(3):1063–1077. https://doi.org/10.1016/j.ejor.2005.05.032
Salema MIG, Barbosa-Povoa AP, Novais AQ (2010) Simultaneous design and planning of supply chains with reverse flows: a generic modelling framework. Eur J Oper Res 203(2):336–349. https://doi.org/10.1016/j.ejor.2009.08.002
Sasikumar P, Haq AN (2011) Integration of closed loop distribution supply chain network and 3PRLP selection for the case of battery recycling. Int J Prod Res 49(11):3363–3385. https://doi.org/10.1080/00207541003794876
Sasikumar P, Kannan G (2008a) Issues in reverse supply chains, part I: end-of-life product recovery and inventory management – an overview. Int J Sustain Eng 1(3):154–172. https://doi.org/10.1080/19397030802433860
Sasikumar P, Kannan G (2008b) Issues in reverse supply chains, part II: reverse distribution issues – an overview. Int J Sustain Eng 1(4):234–249. https://doi.org/10.1080/19397030802509974
Sasikumar P, Kannan G, Haq AN (2010) A multi-echelon reverse logistics network design for product recovery—a case of truck tire remanufacturing. Int J Adv Manuf Technol 49(9–12):1223–1234. https://doi.org/10.1007/s00170-009-2470-4
Savaskan RC, Bhattacharya S, Wassenhove LNV (2004) Closed-loop supply chain models with product remanufacturing. Manag Sci 50(2):239–252. https://doi.org/10.1287/mnsc.1030.0186
Schenkel M, Caniëls MC, Krikke H, Laan EVD (2015) Understanding value creation in closed loop supply chains – past findings and future directions. J Manuf Syst 37:729–745. https://doi.org/10.1016/j.jmsy.2015.04.009
Schultmann F, Zumkeller M, Rentz O (2006) Modeling reverse logistic tasks within closed-loop supply chains: an example from the automotive industry. Eur J Oper Res 171(3):1033–1050. https://doi.org/10.1016/j.ejor.2005.01.016
Selim H, Ozkarahan I (2006) A supply chain distribution network design model: an interactive fuzzy goal programming-based solution approach. Int J Adv Manuf Technol 36(3–4):401–418. https://doi.org/10.1007/s00170-006-0842-6
Sharma M, Ammons JC, Hartman JC (2007) Asset management with reverse product flows and environmental considerations. Comput Oper Res 34(2):464–486. https://doi.org/10.1016/j.cor.2005.03.009
Shekarian E (2020) A review of factors affecting closed-loop supply chain models. J Clean Prod 253:119823. https://doi.org/10.1016/j.jclepro.2019.119823
Sherif SU, Sasikumar P, Asokan P, Jerald J (2019) Bi-objective optimisation model with societal constraints for green closed loop supply chain network - a case of battery industry. Int J Product Qual Manag 27(3):276. https://doi.org/10.1504/ijpqm.2019.101518
Sheu J-B (2007) A coordinated reverse logistics system for regional management of multi-source hazardous wastes. Comput Oper Res 34(5):1442–1462. https://doi.org/10.1016/j.cor.2005.06.009
Sheu J-B (2008) Green supply chain management, reverse logistics and nuclear power generation. Transp Res E Logist Transp Rev 44(1):19–46. https://doi.org/10.1016/j.tre.2006.06.001
Sheu J-B, Chou Y-H, Hu C-C (2005) An integrated logistics operational model for green-supply chain management. Transp Res E Logist Transp Rev 41(4):287–313. https://doi.org/10.1016/j.tre.2004.07.001
Shi J, Zhang G, Sha J, Amin SH (2010) Coordinating production and recycling decisions with stochastic demand and return. J Syst Sci Syst Eng 19(4):385–407. https://doi.org/10.1007/s11518-010-5147-5
Shi J, Zhang G, Sha J (2011a) Optimal production planning for a multi-product closed loop system with uncertain demand and return. Comput Oper Res 38(3):641–650. https://doi.org/10.1016/j.cor.2010.08.008
Shi J, Zhang G, Sha J (2011b) Optimal production and pricing policy for a closed loop system. Resour Conserv Recycl 55(6):639–647. https://doi.org/10.1016/j.resconrec.2010.05.016
Simangunsong E, Hendry L, Stevenson M (2012) Supply-chain uncertainty: a review and theoretical foundation for future research. Int J Prod Res 50(16):4493–4523. https://doi.org/10.1080/00207543.2011.613864
Snyder LV (2006) Facility location under uncertainty: a review. IIE Trans 38(7):547–564. https://doi.org/10.1080/07408170500216480
Soleimani H, Seyyed-Esfahani M, Shirazi MA (2013a) Designing and planning a multi-echelon multi-period multi-product closed-loop supply chain utilizing genetic algorithm. Int J Adv Manuf Technol 68(1–4):917–931. https://doi.org/10.1007/s00170-013-4953-6
Soleimani H, Seyyed-Esfahani M, Kannan G (2013b) Incorporating risk measures in closed-loop supply chain network design. Int J Prod Res 52(6):1843–1867. https://doi.org/10.1080/00207543.2013.849823
Souza GC (2012) Closed-loop supply chains: a critical review, and future research*. Decis Sci 44(1):7–38. https://doi.org/10.1111/j.1540-5915.2012.00394.x
Stindt D, Sahamie R (2012) Review of research on closed loop supply chain management in the process industry. Flex Serv Manuf J 26(1–2):268–293. https://doi.org/10.1007/s10696-012-9137-4
Talaei M, Moghaddam BF, Pishvaee MS, Bozorgi-Amiri A, Gholamnejad S (2016) A robust fuzzy optimization model for carbon-efficient closed-loop supply chain network design problem: a numerical illustration in electronics industry. J Clean Prod 113:662–673. https://doi.org/10.1016/j.jclepro.2015.10.074
Tang J, Liu Y, Fung RY, Luo X (2008) Industrial waste recycling strategies optimization problem: mixed integer programming model and heuristics. Eng Optim 40(12):1085–1100. https://doi.org/10.1080/03052150802294573
Tokhmehchi N, Makui A, Sadi-Nezhad S (2015) A hybrid approach to solve a model of closed-loop supply chain. Math Probl Eng 2015:1–18. https://doi.org/10.1155/2015/179102
Tosarkani BM, Amin SH (2018a) A possibilistic solution to configure a battery closed-loop supply chain: multi-objective approach. Expert Syst Appl 92:12–26. https://doi.org/10.1016/j.eswa.2017.09.039
Tosarkani BM, Amin SH (2018b) A multi-objective model to configure an electronic reverse logistics network and third party selection. J Clean Prod 198:662–682. https://doi.org/10.1016/j.jclepro.2018.07.056
Tosarkani BM, Amin SH (2019) An environmental optimization model to configure a hybrid forward and reverse supply chain network under uncertainty. Comput Chem Eng 121:540–555. https://doi.org/10.1016/j.compchemeng.2018.11.014
Tosarkani BM, Amin SH, Zolfagharinia H (2019) A scenario-based robust possibilistic model for a multi-objective electronic reverse logistics network. Int J Product Econ 107557. https://doi.org/10.1016/j.ijpe.2019.107557
Üster H, Easwaran G, Akçali E, Çetinkaya S (2007) Benders decomposition with alternative multiple cuts for a multi-product closed-loop supply chain network design model. Nav Res Logist 54(8):890–907. https://doi.org/10.1002/nav.20262
Vahdani B, Mohammadi M (2015) A bi-objective interval-stochastic robust optimization model for designing closed loop supply chain network with multi-priority queuing system. Int J Prod Econ 170:67–87. https://doi.org/10.1016/j.ijpe.2015.08.020
Vahdani B, Razmi J, Tavakkoli-Moghaddam R (2012a) Fuzzy possibilistic modeling for closed loop recycling collection networks. Environ Model Assess 17(6):623–637. https://doi.org/10.1007/s10666-012-9313-7
Vahdani B, Tavakkoli-Moghaddam R, Modarres M, Baboli A (2012b) Reliable design of a forward/reverse logistics network under uncertainty: a robust-M/M/c queuing model. Transp Res E Logist Transp Rev 48(6):1152–1168. https://doi.org/10.1016/j.tre.2012.06.002
Vahdani B, Tavakkoli-Moghaddam R, Jolai F, Baboli A (2013a) Reliable design of a closed loop supply chain network under uncertainty: an interval fuzzy possibilistic chance-constrained model. Eng Optim 45(6):745–765. https://doi.org/10.1080/0305215x.2012.704029
Vahdani B, Tavakkoli-Moghaddam R, Jolai F (2013b) Reliable design of a logistics network under uncertainty: a fuzzy possibilistic-queuing model. Appl Math Model 37(5):3254–3268. https://doi.org/10.1016/j.apm.2012.07.021
Vlachos D, Georgiadis P, Iakovou E (2007) A system dynamics model for dynamic capacity planning of remanufacturing in closed-loop supply chains. Comput Oper Res 34(2):367–394. https://doi.org/10.1016/j.cor.2005.03.005
Wang H-F, Hsu H-W (2010a) A closed-loop logistic model with a spanning-tree based genetic algorithm. Comput Oper Res 37(2):376–389. https://doi.org/10.1016/j.cor.2009.06.001
Wang H-F, Hsu H-W (2010b) Resolution of an uncertain closed-loop logistics model: an application to fuzzy linear programs with risk analysis. J Environ Manag 91(11):2148–2162. https://doi.org/10.1016/j.jenvman.2010.05.009
Wang H-F, Huang Y-S (2013) A two-stage robust programming approach to demand-driven disassembly planning for a closed-loop supply chain system. Int J Prod Res 51(8):2414–2432. https://doi.org/10.1080/00207543.2012.737940
Wang J-J, Chen H, Rogers DS, Ellram LM, Grawe SJ (2017) A bibliometric analysis of reverse logistics research (1992-2015) and opportunities for future research. Int J Phys Distrib Logist Manag 47(8):666–687. https://doi.org/10.1108/ijpdlm-10-2016-0299
Wang Y, Wang Z, Li B, Liu Z, Zhu X, Wang Q (2019) Closed-loop supply chain models with product recovery and donation. J Clean Prod 227:861–876. https://doi.org/10.1016/j.jclepro.2019.04.236
Webster S, Mitra S (2007) Competitive strategy in remanufacturing and the impact of take-back laws. J Oper Manag 25(6):1123–1140. https://doi.org/10.1016/j.jom.2007.01.014
Wei J, Zhao J (2013) Reverse channel decisions for a fuzzy closed-loop supply chain. Appl Math Model 37(3):1502–1513. https://doi.org/10.1016/j.apm.2012.04.003
Wei J, Govindan K, Li Y, Zhao J (2015) Pricing and collecting decisions in a closed-loop supply chain with symmetric and asymmetric information. Comput Oper Res 54:257–265. https://doi.org/10.1016/j.cor.2013.11.021
Wu H, Xu B, Zhang D (2019) Closed-loop supply chain network equilibrium model with subsidy on green supply chain technology investment. Sustainability 11(16):4403. https://doi.org/10.3390/su11164403
Xanthopoulos A, Iakovou E (2009) On the optimal design of the disassembly and recovery processes. Waste Manag 29(5):1702–1711. https://doi.org/10.1016/j.wasman.2008.11.009
Yang Y, Xu X (2019) A differential game model for closed-loop supply chain participants under carbon emission permits. Comput Ind Eng 135:1077–1090. https://doi.org/10.1016/j.cie.2019.03.049
Yang G-F, Wang Z-P, Li X-Q (2009) The optimization of the closed-loop supply chain network. Transp Res E Logist Trans pRev 45(1):16–28. https://doi.org/10.1016/j.tre.2008.02.007
Yavari M, Geraeli M (2019) Heuristic method for robust optimization model for green closed-loop supply chain network design of perishable goods. J Clean Prod 226:282–305. https://doi.org/10.1016/j.jclepro.2019.03.279
Yuan K, Gao Y (2009) Inventory decision-making models for a closed-loop supply chain system. Int J Prod Res 48(20):6155–6187. https://doi.org/10.1080/00207540903173637
Zeballos LJ, Gomes MI, Barbosa-Povoa AP, Novais AQ (2012) Addressing the uncertain quality and quantity of returns in closed-loop supply chains. Comput Chem Eng 47:237–247. https://doi.org/10.1016/j.compchemeng.2012.06.034
Zeballos LJ, Méndez CA, Barbosa-Povoa AP, Novais AQ (2014) Multi-period design and planning of closed-loop supply chains with uncertain supply and demand. Comput Chem Eng 66:151–164. https://doi.org/10.1016/j.compchemeng.2014.02.027
Zhang YM, Huang GH, He L (2011) An inexact reverse logistics model for municipal solid waste management systems. J Environ Manag 92(3):522–530. https://doi.org/10.1016/j.jenvman.2010.09.011
Zhang Z-H, Jiang H, Pan X (2012) A Lagrangian relaxation based approach for the capacitated lot sizing problem in closed-loop supply chain. Int J Prod Econ 140(1):249–255. https://doi.org/10.1016/j.ijpe.2012.01.018
Zhao J, Sun N (2019) Government subsidies-based profits distribution pattern analysis in closed-loop supply chain using game theory. Neural Comput & Applic. https://doi.org/10.1007/s00521-019-04245-2
Zhou Y, Wang S (2008) Generic model of reverse logistics network design. J Trans Syst Eng Inform Technol 8(3):71–78. https://doi.org/10.1016/s1570-6672(08)60025-2
Zhou Y, Xiong Y, Li G, Xiong Z, Beck M (2013) The bright side of manufacturing–remanufacturing conflict in a decentralised closed-loop supply chain. Int J Prod Res 51(9):2639–2651. https://doi.org/10.1080/00207543.2012.737956
Zuidwijk R, Krikke H (2008) Strategic response to EEE returns. Eur J Oper Res 191(3):1206–1222. https://doi.org/10.1016/j.ejor.2007.08.004
Acknowledgements
The authors would like to thank the editor and reviewers for their great comments that improved the quality of this paper significantly. This research has been supported by the Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery grants.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Amin, S.H., Zhang, G. & Eldali, M.N. A review of closed-loop supply chain models. J. of Data, Inf. and Manag. 2, 279–307 (2020). https://doi.org/10.1007/s42488-020-00034-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42488-020-00034-y