Abstract
As the essential technology of human-robotics interactive wearable devices, the robotic knee prosthesis can provide above-knee amputations with functional knee compensations to realize their physical and psychological social regression. With the development of mechanical and mechatronic science and technology, the fully active knee prosthesis that can provide subjects with actuating torques has demonstrated a better wearing performance in slope walking and stair ascent when compared with the passive and the semi-active ones. Additionally, with intelligent human-robotics control strategies and algorithms, the wearing effect of the knee prosthesis has been greatly enhanced in terms of stance stability and swing mobility. Therefore, to help readers to obtain an overview of recent progress in robotic knee prosthesis, this paper systematically categorized knee prostheses according to their integrated functions and introduced related research in the past ten years (2010–2020) regarding (1) mechanical design, including uniaxial, four-bar, and multi-bar knee structures, (2) actuating technology, including rigid and elastic actuation, and (3) control method, including mode identification, motion prediction, and automatic control. Quantitative and qualitative analysis and comparison of robotic knee prosthesis-related techniques are conducted. The development trends are concluded as follows: (1) bionic and lightweight structures with better mechanical performance, (2) bionic elastic actuation with energy-saving effect, (3) artificial intelligence-based bionic prosthetic control. Besides, challenges and innovative insights of customized lightweight bionic knee joint structure, highly efficient compact bionic actuation, and personalized daily multi-mode gait adaptation are also discussed in-depth to facilitate the future development of the robotic knee prosthesis.
Article PDF
Similar content being viewed by others
References
Andrysek J, Klejman S, Torres-Moreno R, Heim W, Steinnagel B, Glasford S. Mobility function of a prosthetic knee joint with an automatic stance phase lock. Prosthetics and Orthotics International, 2011, 35, 163–170.
Arelekatti V M, Winter A G. Design of a fully passive prosthetic knee mechanism for transfemoral amputees in India. IEEE International Conference on Rehabilitation Robotics (ICORR), Singapore, 2015, 350–356.
Arelekatti V M, Winter A G. Design of mechanism and preliminary field validation of low-cost, passive prosthetic knee for users with transfemoral amputation in India. Proceeding of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, USA, 2015.
Ramakrishinan T. Asymmetric Unilateral Transfemoral Prosthetic Simulator. Department of Mechanical Engineering, Master’s thesis, University of South Florida, Florida, USA, 2014.
Liu M, Datseris P, Huang H H. A prototype for smart prosthetic legs-analysis and mechanical design. Advanced Materials Research, 2012, 403–408, 1999–2006.
Kou I, Takahiro W, Ryuchi H. Novel knee joint mechanism of transfemoral prosthesis for stair ascent. IEEE 13th International Conference on Rehabilitation Robotics (ICORR), Seattle, USA, 2013, 7, 24–26
Lenzi T, Cempini M, Hargrove L, Kuiken T. Design, development, and testing of a lightweight hybrid robotic knee prosthesis. The International Journal of Robotics Research, 2018, 37, 953–976.
Lovasz E C, Ciupe V, Modler K H, Gruescu C M, Hanke U, Maniu I, Margineanu D. Experimental design and control approach of an active knee prosthesis with geared linkage. New Advances in Mechanisms, Transmissions and Applications Springer Netherlands, 2014, 17, 149–156.
Yaghoub D, Siamak N, Mohammad R E, Saeed Z, David M. A powered prosthetic knee joint inspired from musculoskeletal system. Biocybernetics and Biomedical Engineering, 2013, 33, 118–124.
Hoover C D, Fite K B. Development of a powered-knee transfemoral prosthesis prototype. Proceedings of the ASME 2011 Summer Bioengineering Conference, Pennsylvania, USA, 2011, 531–532.
Hoover C D, Fulk G D, Fite K B. Stair ascent with a powered transfemoral prosthesis under direct myoelectric control. IEEE/ASME Transactions on Mechatronics, 2013, 18, 1191–1200.
Demsar I, Supej M, Vidrih Z, Duhovnik J. Development of prosthetic knee for alpine skiing. Journal of Mechanical Engineering, 2011, 57, 768–777.
Inoue K, Tanaka T, Wada T, Tachiwana S. Development of a passive knee mechanism that realizes level walk and stair ascent functions for transfemoral prosthesis. 6th IEEE International Conference on Biomedical Robotics and Biomechatronics, Singapore, 2016, 522–527.
Awad M, Tee K S, Dehghani A. Analysis and performance of a semi-active prosthetic knee. Proceedings of the International Conference on Mechanical Engineering and Mechatronics, Ottawa, Canada, 2012, 213.
Etoundi A C, Lock R J, Vaidyanathan R, Burgess S C. A bio-inspired condylar knee joint for knee prosthetics. International Journal of Design & Nature and Ecodynamics, 2013, 8, 213–225.
Lu J A, Chen Y H. Topology optimisation and customisation of a prosthetic knee joint design. International Journal of Computer Integrated Manufacturing, 2013, 26, 968–976.
Bulea T C, Kobetic R, To C S, Audu M L, Schnellenberger J R, Triolo R J. A variable impedance knee mechanism for controlled stance flexion during pathological gait. IEEE/ASME Transactions on Mechatronics, 2012, 17, 822–832.
Li F, Zhang F M, Ding R X, Xie H L. Mechanism design and shock-absorbing performance analysis of prosthesis knee joint with meniscus. Machinery Design & Manufacture, 2016, 1, 161–164.
Fu H Q, Zhang X F, Wang X T, Yang R, Li J, Wang L, Zhang N, Li G, Liu T, Fan B F, Inoue Y. A novel prosthetic knee joint with a parallel spring and damping mechanism. International Journal of Advanced Robotic Systems, 2016, 13, 1–9.
Zhang X F, Fu H Q, Wang X T, Li G, Yang R, Liu Y. Design of a novel bionic prosthetic knee joint. Assembly Automation, 2016, 36, 398–404.
Arelekatti V N M, Winter V A G. Design and preliminary field validation of a fully passive prosthetic knee mechanism for users with transfemoral amputation in India. Journal of Mechanisms and Robotics, 2018, 10, 031007.
Sun Y X, Ge W J, Zheng J, Dong D B. Design and evaluation of a prosthetic knee joint using the geared five-bar mechanism. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2015, 23, 1031–1038.
Alessio J, Russell K, Lee W T, Sodhi R S. On the application of rrss motion generation and rrss axode generation for the design of a concept prosthetic knee. Mechanics Based Design of Structures and Machines, 2017, 45, 406–414.
Wu B, Chen Z B, Cheng M. Design and simulation of a new prosthetic knee joint. Machinery Design & Manufacture, 2015, 06, 5–8.
Wu X Y, Zhai S J, Hao Q. Analysis and simulation of prosthetic knee joint four bar mechanism. Journal of Machine Design, 2011, 09, 42–45.
Zhang L J, Lu W T, Cao X M. Structural optimal design of four-bar bionic knee joint. Machine Tool & Hydraulics, 2015, 09, 67–70.
Ghaemi N, Zohoor H, Ghaemi H. Dynamic performance of different knee mechanisms with compliant joints. Scientia Iranica, 2016, 23, 1055–1063.
Pfeifer S, Riener R, Vallery H. An actuated transfemoral prosthesis with optimized polycentric knee joint. 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics, 2012, 1807–1812.
Pfeifer S, Pagel A, Riener R, Vallery H. Actuator with angle-dependent elasticity for biomimetic transfemoral prostheses. IEEE/ASME Transactions on Mechatronics, 2015, 20, 1384–1394.
Guo H T, Liao W H. A novel multifunctional rotary actuator with magnetorheological fluid. Smart Materials and Structures, 2012, 21, 65012–65020.
Guomundsson K H. Design of a Magnetorheological Fluid for an MR Prosthetic Knee Actuator with an Optimal Geometry, PhD thesis, University of Iceland, Iceland, 2011.
Solomon S, Sujatha C, Sujatha S. Optimal design of an MR damper valve for prosthetic knee application. Journal of Mechanical Science and Technology, 2018, 32, 2959–2965.
Furuya Y, Mikami T, Suzuki T, Fujimoto Y. On an active prosthetic knee joint driven by a high thrust force helical motor. 39th Annual Conference of the IEEE Industrial Electronics Society, 2013, 5894–5899.
Bogert A J V D, Samorezov S, Davis B L, Smith W A. Modeling and optimal control of an energy-storing prosthetic knee. Journal of Biomechanical Engineering, 2012, 134, 051007.
Wilmot T, Thomas G, Montavon B, Rarick R, Van dBAJ, Szatmary S, Simon D J, Smith W, Samorezov S. Biogeography-based optimization for hydraulic prosthetic knee control. Medical Cyber-Physical Systems Workshop, Philadelphia, Pennsylvania, 2013, 18–25.
Rarick R, Richter H, Bogert A V D, Dan S, Warner H, Barto T. Optimal design of a transfemoral prosthesis with energy storage and regeneration. American Control Conference IEEE, 2014, 4108–4113.
Martinez-Villalpando E C, Mooney L, Elliott G, Herr H. Antagonistic active knee prosthesis a metabolic cost of walking comparison with a variable-damping prosthetic knee. Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2011, 8519–8522.
Rouse E J, Mooney L M, Herr H. Clutchable series-elastic actuator: Implications for prosthetic knee design. The International Journal of Robotics Research, 2014, 33, 1611–1625.
Rouse E J, Mooney L M, Martinez-Villalpando E C, Herr H. Clutchable series-elastic actuator: Design of a robotic knee prosthesis for minimum energy consumption. 13th International Conference on Rehabilitation Robotics, Seattle, USA, 2013, 1–6.
Hoover C D, Fite K B. A configuration dependent muscle model for the myoelectric control of a transfemoral prosthesis. IEEE International Conference on Rehabilitation Robotics, Zurich, Switzerland, 2011, 1–6.
Grimmer M, Seyfarth A. Stiffness adjustment of a series elastic actuator in a knee prosthesis for walking and running: The trade-off between energy and peak power optimization. IEEE/RSJ International Conference on Intelligent Robots and Systems, 2011, 1811–1816.
Geeroms J, Flynn L, Jimenez-Fabian R, Vanderborght B, Lefeber D. Design and energetic evaluation of a prosthetic knee joint actuator with a lockable parallel spring. Bioinspiration & Biomimetics, 2017, 12, 026002.
Schuy J, Beckerle P, Wojtusch J, Rinderknecht S, Stryk O. Conception and evaluation of a novel variable torsion stiffness for biomechanical applications. 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), 2012, 713–718.
Beckkerle P. Human-Machine-Centered Design and Actuation of Lower Limb Prosthetic Systems. Darmstadt University of Technology, Hessen, Germany, 2014.
Wentink E C, Koopman H, Stramigioli S, Rstramigioli J S, Veltink P H. Variable stiffness actuated prosthetic knee to restore knee buckling during stance: A modeling study. Medical engineering & physics, 2013, 35, 838–845.
Ma Y L, Xu W L, Meng M, Luo Z Z, Yang J Q. Adaptive control for intelligent lower limb prosthesis based on neural network. Journal of Zhejiang University (Engineering Science), 2010, 44, 1373–1376. (in Chinese)
Ma Y L, Luo Z Z, Meng M, She Q S. Adaptive control for intelligent lower-limb prosthesis based on LVQ neural network. 7th National Symposium on Rehabilitation Medicine Engineering and Rehabilitation Engineering, 2010, 61–66.
Ha K H, Varol H A, Goldfarb M. Volitional control of a prosthetic knee sing surface electromyography. IEEE Transactions on Biomedical Engineering, 2011, 58, 144–151.
Hargrove L J, Simon A M, Lipschutz R D, Finucane S B, Kuiken T A. Real-time myoelectric control of knee and ankle motions for transfemoral amputees. Jama the Journal of the American Medical Association, 305, 15, 1542–1544.
Hargrove L, Simon A M, Finucane S B, Lipschutz R D. Myoelectric control of a powered transfemoral prosthesis during non-weight-bearing activities. Proceedings of the MyoElectric Controls/Powered Prosthetics Symposium Fredericton, New Brunswick, Canada, 2011.
Hargrove L J, Simon A M, Lipschutz R, Finucane S B, Kuilen T A. Non-weight-bearing neural control of a powered transfemoral prosthesis. Journal of Neuroengineering and Rehabilitation, 2013, 10, 62–62.
Dawley J A, Fite K B, Fulk G D. EMG control of a bionic knee prosthesis: Exploiting muscle co-contractions for improved locomotor function. IEEE 13th International Conference on Rehabilitation Robotics (ICORR), Seattle, USA, 2013, 1–6.
Huang H, Zhang F, Hargrove L J, Dou Z, Rogers D R, Englehart K B. Continuous locomotion-mode identification for prosthetic legs based on neuromuscular-mechanical fusion. IEEE Transactions on Biomedical Engineering, 2011, 58, 2867–2875.
Young A J, Simon A M, Hargrove L J. A training method for locomotion mode prediction using powered lower limb prostheses. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2014, 22, 671–677.
Kutilek P, Farkasova B. Prediction of lower extremities’ movement by angle-angle diagrams and neural networks. Acta of Bioengineering and Biomechanics, 2011, 13, 57–65.
Vallery H, Burgkart R, Hartmann C, Mitternacht J, Riener R, Buss M. Complementary limb motion estimation for the control of active knee prostheses. Biomedizinische Technik/Biomedical Engineering, 2011, 56, 45–51.
Joshi D, Mishra A, Anand S. ANFIS based knee angle prediction: An approach to design speed adaptive contra lateral controlled AK prosthesis. Applied Soft Computing, 2011, 11, 4757–4765.
Chen L L, Yang P, Geng Y L, Liu Z J. Torque recognition of knee joint based on electromyography. Journal of Central South University: Science and Technology, 2013, 44(SUPPL. 2), 117–121. (in Chinese)
Lawson B E, Varol H A, Huff A, Erdemir E, Goldfarb M. Control of stair ascent and descent with a powered trans-femoral prosthesis. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 2013, 21, 466–473.
Lawson B E, Varol H A, Goldfarb M. Standing stability enhancement with an intelligent powered transfemoral prosthesis. IEEE Transactions on Biomedical Engineering, 2011, 58, 2617–2624.
Liu M, Zhang F, Datseris P, Huang H. Improving finite state impedance control of active-transfemoral prosthesis using dempster-shafer based state transition rules. Journal of Intelligent & Robotic Systems, 2014, 76, 461–474.
Xie H L, Liu Z B, Yang J Y, Sheng Z Q, Xu Z W. Modelling of magnetorheological damper for intelligent bionic leg and simulation of knee joint movement control. International Journal of Simulation Modelling (IJSIMM), 2016, 15, 144–156.
Ekkachai K, Nilkhamhang I. Swing phase control of semi-active prosthetic knee using neural network predictive control with particle swarm optimization. IEEE Transactions on Neural Systems & Rehabilitation Engineering, 2016, 24, 1169–1178.
Wen Y, Si J, Gao X, Huang S, Huang H. A new powered lower limb prosthesis control framework based on adaptive dynamic programming. IEEE Transactions on Neural Networks & Learning Systems, 2017, 28, 2215–2220.
Quintero D. Virtual Constraint Control of Powered Prosthetic Pegs: Unifying the Gait Cycle, PhD thesis, University of Texas at Dallas, Richardson City, USA, 2018.
Inoue K, Fukuda T, Wada T. A control method for transfemoral prosthetic knees based on thigh angular motion. 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Berlin, Germany, 2019, 6644–6647.
Soriano J F, Rodríguez J E, Valencia L A. Performance comparison and design of an optimal polycentric knee mechanism. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42, 221.
Han D L, Zhang R, Zhang H, Hu Z Y, Li J Q. Mechanical performances of typical robot feet intruding into sands. Energies, 2020, 13, 1867.
Carbone G, Rossi C, Savino S. Performance comparison between FEDERICA hand and LARM hand. International Journal of Advanced Robotic Systems, 2015, 12, 90.
Acknowledgment
This work was supported by the National Natural Science Foundation of China (Grant Nos. 62003060, 51975070 and 62033001), and the National Key Research and Development Program of China under Grant 2020YFB1313000.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sun, Y., Tang, H., Tang, Y. et al. Review of Recent Progress in Robotic Knee Prosthesis Related Techniques: Structure, Actuation and Control. J Bionic Eng 18, 764–785 (2021). https://doi.org/10.1007/s42235-021-0065-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42235-021-0065-4