Abstract
At present, the research studies in the composite materials are enduring to improve the mechanical and other necessary properties of materials. The need for advanced form of hybrid metal matrix composite has been used in aerospace, defence and numerous engineering applications due to its less weight, improved hardness and outstanding machining properties in wide range. This paper focuses on mechanical properties and influences of drilling parameters on the cast Al7075/B4C/BN hybrid composites. Liquid metallurgy technique is most preferable to blend the ceramic particle with matrix material with excellent dispersion qualities. CNC drilling machine is used to perform the experiments. TiN-coated carbide drill bit is used to conduct the experiments by varying the tool angle. While drilling, operation is performed and thrust force is measured by varying the machining parameters. Microstructure and elemental confirmation of the prepared composites are analysed using SEM with EDX mapping. Feed rate and point of angle are the most influencing parameters for thrust force and surface roughness of the prepared hybrid composites. An orthogonal array of L27 is selected to carry out the drilling operation. In addition, tensile properties and density of the prepared composites are also analysed.
Similar content being viewed by others
References
Chen HS, Wang WX, Li YL, Nie HH, Wu QC (2016) The design, microstructure and mechanical properties of B4C/6061Al neutron absorber composites fabricated by SPS. Mater Des 94:360–367
Thirumalai Kumaran S, Uthayakumar M, Slota A, Aravindan S, Zajac J (2016) Machining behavior of AA6351–SiC–B4C hybrid composites fabricated by stir casting method. Part Sci Technol 34(5):586–592
Kalaiselvan K, Murugan N, Parameswaran S (2011) Production and characterization of AA6061–B4C stir cast composite. Mater Des 32(7):4004–4009
Thulasiram Ramkumar, Mani Selvakumar, Pandiarajan Narayanasamy, Pandiarajan Balasundar (2018) Effect of B4C in Ti–6Al–4V matrix on workability behavior of powder metallurgy composites during cold upsetting. Int J Mater Res 109:1146–1152
Harichandran R, Selvakumar N (2017) Microstructure and mechanical characterization of (B4C-h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting. Int J Mech Sci 144:814–826
Jebeen Moses J, Dinaharan I, Joseph Sekhar S (2016) Prediction of influence of process parameters on tensile strength of AA6061/TiC aluminum matrix composites produced using stir casting. Trans Nonferr Met Soc China 26:1498–1511
Nicholls CJ, Boswell B, Davies IJ, Islam MN (2017) Review of machining metal matrix composites. Int J Adv Manuf Technol 90:2429–2441. https://doi.org/10.1007/s00170-016-9558-4
Altunpak Y, Ay M, Aslan S (2012) Drilling of a hybrid Al/SiC/Gr metal matrix composites. Int J Adv Manuf Technol 60:513–517. https://doi.org/10.1007/s00170-011-3644-4
Riaz Ahamed A, Asokan P, Aravindan S, Prakash MK (2010) Drilling of hybrid Al-5%SiCp-5%B4Cp metal matrix composites. Int J Adv Manuf Technol 49:871–877. https://doi.org/10.1007/s00170-009-2453-5
Ramkumar T, Selvakumar M, Mohanraj M, Chandrasekar P (2019) Experimental investigation and analysis of drilling parameters of metal matrix (Ti/TiB) composites. J Braz Soc Mech Sci Eng 41:1–8
Thirumalai Kumaran S, Ko TJ, Uthayakumar M, Adam Khan M, Muhammad I (2017) Some experimental investigations on drilling AA (6351)-SiC-B4C composite. Mater Manuf Process 32(13):1557–1564
Samy GS, Thirumalai Kumaran S (2017) Measurement and analysis of temperature, thrust force and surface roughness in drilling of AA (6351)-B4C composite. Measurement 103:1–9
Jian Wu Jianmin Wen Ziyue Wang (2016) Study on the predicted model and experiment of drilling forces in drilling Ti6Al4V. J Braz Soc Mech Sci Eng 38(2):465–472
Palanikumar K, Muniaraj A (2014) Experimental investigation and analysis of thrust force in drilling cast hybrid metal matrix (Al–15%SiC–4%graphite) composites. Measurement 53:240–250
Pazhouhanfar Y, Eghbali B (2018) Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process. Mater Sci Eng A 710:172–180
Ramkumar T, Narayanasamy P, Selvakumar M, Balasundar P (2018) Effect of B4C reinforcement on the dry sliding wear behaviour of Ti-6Al-4V/B4C sintered composites using response surface methodology. Arch Metall Mater 63:1179–1200
Narasimha Murthy I, Venkata Rao D, Babu Rao J (2012) Microstructure and mechanical properties of aluminium-fly ash Nano composites made by ultrasonic method. Mater Des 35:55–65
Ramkumar T, Selvakumar M (2017) Studies on the structural property, mechanical relationships and corrosion behaviour of Inconel 718 and SS 316L dissimilar joints by TIG welding without using activated flux. J Manuf Process 30:290–298
Altinkök N (2019) Modeling of the mechanical and physical properties of hybrid composites produced by gas pressure infiltration. J Braz Soc Mech Sci Eng 41:13
Selvakumar M, Ramkumar T, Chandrasekar P (2019) Thermal characterization of titanium–titanium boride composites. J Therm Anal Calorim 136:419–424
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Márcio Bacci da Silva, Ph.D.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Vignesh Kumar, V., Raja, K., Chandra Sekar, V.S. et al. Thrust force evaluation and microstructure characterization of hybrid composites (Al7075/B4C/BN) processed by conventional casting technique. J Braz. Soc. Mech. Sci. Eng. 41, 228 (2019). https://doi.org/10.1007/s40430-019-1728-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-019-1728-5