Abstract
The processing of elastomers through fused deposition modeling (FDM) is challenging task due to low column strength and high melt viscosity. Ethylene vinyl acetate (EVA) is an elastomer which is widely used for fabricating flexible objects. However, the potential of this material has not been explored in the FDM process. Pre-fabricated EVA filament cannot be processed in standard filament feed extrusion mechanism of commercial FDM machine due to buckling of the filament. However, development of pellet-based extrusion additive manufacturing (AM) may eliminate the issues caused by elastomer filament. The current study demonstrates the development of pellet-based AM system for processing EVA material. The developed system is compatible with the three-axis CNC milling machine, which provides high precision positioning to the deposition path and required power for screw rotation. Details about hardware and software related to the developed system have been presented. Flexible parts using EVA pellets have been fabricated successfully, which shows the capability of the developed extrusion AM system. Experiments have been performed for tuning process parameters. Further, mechanical characterization has been done to analyze the dimensional accuracy, flexibility, strength and hardness of printed parts. Obtained results show that EVA demonstrates approx. 300–550% higher elongation as compared to ABS and PLA materials, which indicates EVA can be used to make highly flexible parts. The outcome of this study will be helpful to the engineers for the development of low-cost flexible parts for those applications where customized flexible parts are needed in short span of time.
Similar content being viewed by others
References
Gibson I, Rosen D, Stucker B (2013) Additive manufacturing technologies. Rapid Manuf Assoc, Second. https://doi.org/10.1520/F2792-12A.2
Kumar N, Shaikh S, Jain PK, Tandon P (2015) Effect of fractal curve based toolpath on part strength in fused deposition modelling. Int J Rapid Manuf 5:186–198. https://doi.org/10.1504/IJRAPIDM.2015.073576
Shaikh S, Kumar N, Jain PK, Tandon P (2016) Hilbert curve based toolpath for FDM process. CAD/CAM, robotics and factories of the future. Springer, New Delhi, pp 751–759
Taufik M, Jain PK (2013) Role of build orientation in layered manufacturing: a review. Int J Manuf Technol Manag 27:47–73
Magalhães LC, Volpato N, Luersen MA (2014) Evaluation of stiffness and strength in fused deposition sandwich specimens. J Braz Soc Mech Sci Eng 36:449–459. https://doi.org/10.1007/s40430-013-0111-1
Singh S, Singh R (2016) Some investigations on surface roughness of aluminium metal composite primed by fused deposition modeling-assisted investment casting using reinforced filament. J Braz Soc Mech Sci Eng. https://doi.org/10.1007/s40430-016-0524-8
Turner BN, Strong R, Gold SA (2014) A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyp J 20:192–204. https://doi.org/10.1108/RPJ-01-2013-0012
Elkins K, Nordby H, Janak C, et al. (1997) Soft elastomers for fused deposition modeling. Solid Freeform Fabrication Proceedings, Sept 1997 (pp. 441–448)
Xiao J, Gao Y (2017) The manufacture of 3D printing of medical grade TPU. Prog Addit Manuf. https://doi.org/10.1007/s40964-017-0023-1
Bellini A, Shor L, Guceri SI (2005) New developments in fused deposition modeling of ceramics. Rapid Prototyp J 11:214–220. https://doi.org/10.1108/13552540510612901
Wang Z, Liu R, Sparks T, Liou F (2016) Large-scale deposition system by an industrial robot (I): design of fused pellet modeling system and extrusion process analysis. 3D Print Addit Manuf 3:39–47. https://doi.org/10.1089/3dp.2015.0029
Volpato N, Kretschek D, Foggiatto JA, da Silva Gomez, Cruz CM (2015) Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets. Int J Adv Manuf Technol 81:1519–1531. https://doi.org/10.1007/s00170-015-7300-2
Taufik M, Jain PK (2016) A study of build edge profile for prediction of surface roughness in fused deposition modeling. J Manuf Sci Eng 138:1–11. https://doi.org/10.1115/1.4032193
Jin YA, Li H, He Y, Fu JZ (2015) Quantitative analysis of surface profile in fused deposition modelling. Addit Manuf 8:142–148. https://doi.org/10.1016/j.addma.2015.10.001
Standard test methods for vulcanized rubber and thermoplastic elastomers—tension. Annu B ASTM Stand i:1–14. https://doi.org/10.1520/d0412-06ae02.2
Francis V, Jain PK (2016) Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite. Virtual Phys Prototyp 11:1–13. https://doi.org/10.1080/17452759.2016.1172431
Sefadi JS, Luyt AS (2012) Morphology and properties of EVA/empty fruit bunch composites. J Thermoplast Compos Mater 25:895–914. https://doi.org/10.1177/0892705711421806
Acknowledgement
This work is carried out under the DST-SERB sponsored project “Development of Additive Subtractive Integrated RP System for Improved Part Quality” (SB/S3/MMER/0043/2013). Authors would like to thank DST-SERB for providing financial support.
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Márcio Bacci da Silva.
Rights and permissions
About this article
Cite this article
Kumar, N., Jain, P.K., Tandon, P. et al. Extrusion-based additive manufacturing process for producing flexible parts. J Braz. Soc. Mech. Sci. Eng. 40, 143 (2018). https://doi.org/10.1007/s40430-018-1068-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-018-1068-x