Skip to main content
SpringerLink
Log in

Microstructure and Mechanical Property of Hot-Rolled Mg–2Ag Alloy Prepared with Multi-pass Rolling

  • Published:
Acta Metallurgica Sinica (English Letters) Aims and scope

Abstract

A conventional multi-pass rolling is designed to form different microstructures in a Mg–2Ag alloy. The relationship between microstructure and mechanical property is investigated. The result shows that twin-induced nucleation plays a prominent role for the dynamic recrystallization (DRX) behavior of the rolled Mg–2Ag alloys. The DRXed grains distributed around elongated grains have random orientations but gradually turn to the concentrated orientation with strong basal texture when the rolling pass increases. The yield strength and ultimate tensile strength of rolled Mg–2Ag alloy gradually increase with increasing rolling pass. The elongation of rolled sample is gradually improved when the rolling pass increases from one to three, while a significant drop of elongation shows in the four-pass rolling sample. The strong basal texture, refined grains, high-density dislocations, and Ag segregation along grain boundaries are suggested to play a prominent role for enhancing the strength of Mg–Ag alloys, while the low-density dislocations, homogeneously fine-grained microstructure, and weak texture are critical for improving the ductility.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Q. Wang, B. Jiang, D. Chen, Z. Jin, L. Zhao, Q. Yang, G. Huang, F. Pan, J. Mater. Sci. 56, 12965 (2021)

    Article  CAS  Google Scholar 

  2. H. Liu, H. Huang, J.P. Sun, C. Wang, J. Bai, A.B. Ma, X.H. Chen, Acta Metall. Sin. -Engl. Lett. 32, 269 (2019)

    Article  CAS  Google Scholar 

  3. J. Wu, L. Jin, J. Dong, F. Wang, S. Dong, J. Mater. Sci. Technol. 42, 175 (2020)

    Article  CAS  Google Scholar 

  4. T. Liu, Q. Yang, N. Guo, Y. Lu, B. Song, J. Magnes. Alloy. 8, 66 (2020)

    Article  CAS  Google Scholar 

  5. S. Jin, X. Ma, R. Wu, T. Li, J. Wang, B.L. Krit, L. Hou, J. Zhang, G. Wang, Int. J Min Met. Mater. 29, 1453 (2022)

    Article  CAS  Google Scholar 

  6. S. Jin, R. Wu, J. Wang, G. Wang, K. Boris, S. Betsofen, Trans. Nonferrous Met. Soc. China 31, 3228 (2021)

    Article  Google Scholar 

  7. R. Li, H. Li, H. Pan, D. Xie, J. Zhang, D. Fang, Y. Dai, D. Zhao, H. Zhang, Scr. Mater. 193, 142 (2021)

    Article  CAS  Google Scholar 

  8. J. Li, J. Wu, L. Jin, M. Celikin, F. Wang, S. Dong, J. Dong, Sci. Rep. 11, 1 (2021)

    Article  Google Scholar 

  9. J. Li, A. Zhang, H. Pan, Y. Ren, Z. Zeng, Q. Huang, C. Yang, L. Ma, G. Qin, J. Magn. Alloy. 9, 1297 (2021)

    Article  Google Scholar 

  10. H. Yu, S. Fan, S. Meng, J.O. Choi, Z. Li, Y. Go, Y.M. Kim, W. Zhao, B.S. You, K.S. Shin, J. Magn. Alloy. 9, 983 (2021)

    Article  CAS  Google Scholar 

  11. R. Li, Y. Yan, H. Pan, H. Zhang, J. Li, G. Qin, B. Liu, Mater. Res. Lett. 10, 682 (2022)

    Article  CAS  Google Scholar 

  12. R. Li, R. Xin, Q. Liu, J. Liu, G. Fu, L. Zong, Y. Yu, S. Guo, Mater. Char. 109, 43 (2015)

    Article  CAS  Google Scholar 

  13. K. Yamada, H. Hoshikawa, S. Maki, T. Ozaki, Y. Kuroki, S. Kamado, Y. Kojima, Scr. Mater. 61, 636 (2009)

    Article  CAS  Google Scholar 

  14. H. Zhou, G. Cheng, X. Ma, W. Xu, S. Mathaudhu, Q. Wang, Y. Zhu, Acta Mater. 95, 20 (2015)

    Article  CAS  Google Scholar 

  15. Y. Zhang, T. Alam, B. Gwalani, W. Rong, R. Banerjee, L.M. Peng, J.F. Nie, N. Birbilis, Mater. Res. 96, 212 (2016)

    CAS  Google Scholar 

  16. W. Jian, G. Cheng, W. Xu, H. Yuan, M. Tsai, Q. Wang, C. Koch, Y. Zhu, S. Mathaudhu, Mater. Res. Lett. 1, 61 (2013)

    Article  CAS  Google Scholar 

  17. J. Zhang, Y. Dou, H. Dong, Scr. Mater. 89, 13 (2014)

    Article  CAS  Google Scholar 

  18. M. Bian, X. Huang, Y. Chino, Mater. Sci. Eng. A 774, 138923 (2020)

    Article  CAS  Google Scholar 

  19. T. Tsuru, H. Somekawa, D. Chrzan, Acta Mater. 151, 78 (2018)

    Article  CAS  Google Scholar 

  20. L. Xiao, X. Chen, K. Wei, Y. Liu, D. Yin, Z. Hu, H. Zhou, Y. Zhu, Scr. Mater. 191, 219 (2021)

    Article  CAS  Google Scholar 

  21. X. Liu, J. Jonas, L. Li, B. Zhu, Mater. Sci. Eng. A 583, 242 (2013)

    Article  CAS  Google Scholar 

  22. W. Gong, R. Zheng, S. Harjo, T. Kawasaki, K. Aizawa, N. Tsuji, J. Magnes. Alloy. (2022). https://doi.org/10.1016/j.jma.2022.02.002

    Article  Google Scholar 

  23. Q. Liao, W. Hu, Q. Le, X. Chen, K. Hu, C. Cheng, C. Hu, Acta Metall. Sin. -Engl. Lett. 33, 1359 (2020)

    Article  CAS  Google Scholar 

  24. P. Da Huo, F. Li, Y. Wang, R.Z. Wu, R.H. Gao, A.X. Zhang, Mater. Des. 110696 (2022).

  25. L. Jiang, J.J. Jonas, A.A. Luo, A.K. Sachdev, S. Godet, Mater. Sci. Eng. A 445, 302 (2007)

    Article  Google Scholar 

  26. M. Myshlyaev, H. McQueen, A. Mwembela, E. Konopleva, Mater. Sci. Eng. A 337, 121 (2002)

    Article  Google Scholar 

  27. L. Tong, J. Chu, D. Zou, Q. Sun, S. Kamado, H. Brokmeier, M. Zheng, Acta Metall. Sin. -Engl. Lett. 34, 265 (2021)

    Article  CAS  Google Scholar 

  28. D. Wang, S. Liu, R. Wu, S. Zhang, Y. Wang, H. Wu, J. Zhang, L. Hou, J. Alloys Compd. 881, 160663 (2021)

    Article  CAS  Google Scholar 

  29. S. Zhao, Y. Xu, X. Lin, C. Geng, Y. Lian, Y. Dong, J. Mater. Res. Technol. 18, 461 (2022)

    Article  CAS  Google Scholar 

  30. Y.Q. Zhao, H.M. Chen, J. Zhang, R. Ma, Y.D. Liu, Y.N. Wang, L. Wang, Q. Zhang, W.G. Li, Acta Metall. Sin. -Engl. Lett. 31, 673 (2018)

    Article  CAS  Google Scholar 

  31. Z. Chen, C. Liu, H. Xiao, J. Wang, Z. Chen, S. Jiang, Z. Su, Mater. Sci. Eng. A 618, 232 (2014)

    Article  CAS  Google Scholar 

  32. S. Wang, J. Ma, J. Yang, W. Zhang, Y. Sun, J. Pan, H. Wang, W. Chen, J. Mater. Res. Technol. 14, 2124 (2021)

    Article  CAS  Google Scholar 

  33. D. Guan, W.M. Rainforth, J. Gao, J. Sharp, B. Wynne, L. Ma, Acta Mater. 135, 14 (2017)

    Article  CAS  Google Scholar 

  34. S. Shah, M. Jiang, D. Wu, U. Wasi, R. Chen, Acta Metall. Sin. -Engl. Lett. 31, 923 (2018)

    Article  CAS  Google Scholar 

  35. Z. Zeng, M. Bian, S. Xu, C. Davies, N. Birbilis, J. Nie, Scr. Mater. 108, 6 (2015)

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (Nos. 52171121, 51971151, and 51971053), the Liao Ning XingLiao Program (No. XLYC1907083), the Science Research Project of Liaoning Province Education Department (No. LQ2019002), the Fundamental Research Funds for the Central Universities (No. N2202020), and the Science Research Project of Liaoning Province Education Department (No. LJ2020015), Natural Science Foundation of Liaoning Province of China (2022-NLTS-18-01), the Open Foundation of Key Laboratory of Superlight Materials & Surface Technology of Ministry of Education (HEU10202205).

Author information

Authors and Affiliations

  1. School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang, 110142, China

    H. Zhang, H. L. Hao, G. Y. Fu, B. S. Liu & R. G. Li

  2. Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin, 150001, China

    R. Z. Wu

  3. Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang, 110819, China

    H. C. Pan

Authors
  1. H. Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. H. L. Hao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. G. Y. Fu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. B. S. Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. R. G. Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. R. Z. Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. H. C. Pan
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to B. S. Liu, R. G. Li or H. C. Pan.

Ethics declarations

Conflict of interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Available online at http://link.springer.com/journal/40195.

Rights and permissions

Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, H., Hao, H.L., Fu, G.Y. et al. Microstructure and Mechanical Property of Hot-Rolled Mg–2Ag Alloy Prepared with Multi-pass Rolling. Acta Metall. Sin. (Engl. Lett.) 36, 335–342 (2023). https://doi.org/10.1007/s40195-022-01462-y

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40195-022-01462-y

Keywords

Search

Navigation