Abstract
Powder metallurgy (PM) is one of the most applied processes in the fabrication of metal matrix composites (MMCs). Recently, a novel PM strategy called flake PM was developed to fabricate MMCs with nano-laminated or hierarchical architectures. The name “flake PM” was derived from the use of flake metal powders, which could benefit the uniform dispersion of reinforcements in the metal matrices and thus result in balanced strength and ductility. Flake PM has been proved to be successful in the dispersion of nano aluminum oxides, carbon nanotubes, graphene nano-sheets, and microsized B4C particles in aluminum or copper matrix. This paper reviews the technique and mechanism developments of flake PM in previous studies, and foresees the future develop of this new fabricating method.
Similar content being viewed by others
References
D.B. Miracle, Compos. Sci. Technol. 65, 2526 (2005)
K.K. Chawla, N. Chawla, Metal–Matrix Composites (Springer, New York, 2006), pp. 166–195
D.L. Zhang, Prog. Mater. Sci. 49, 537 (2004)
L. Jiang, G. Fan, Z. Li, X. Kai, D. Zhang, Z. Chen, S. Humphries, G. Heness, W.Y. Yeung, Carbon 49, 1965 (2011)
Z. Li, L. Jiang, G. Fan, Y. Xu, D. Zhang, Z. Chen, S. Humphries, Micro Nano Lett. 5, 379 (2010)
H. Wei, Z. Li, D.B. Xiong, Z. Tan, G. Fan, Z. Qin, D. Zhang, Scr. Mater. 75, 30 (2014)
Z.Q. Tan, Z.Q. Li, G.L. Fan, W.H. Li, Q.L. Liu, Z. Wang, D. Zhang, Nanotechnology 22, 225603 (2011)
J. Wang, Z. Li, G. Fan, H. Pan, Z. Chen, D. Zhang, Scr. Mater. 66, 594 (2012)
L. Jiang, Z. Li, G. Fan, D. Zhang, Scr. Mater. 65, 412 (2011)
L. Cao, Z. Li, G. Fan, L. Jiang, D. Zhang, W.J. Moon, Y.S. Kim, Carbon 50, 1057 (2012)
J. Tang, G. Fan, Z. Li, X. Li, R. Xu, Y. Li, D. Zhang, W.J. Moon, S.D. Kaloshkin, M. Churyukanova, Carbon 55, 202 (2013)
X.Z. Kai, Z.Q. Li, G.L. Fan, Q. Guo, D.B. Xiong, W.L. Zhang, Y.S. Su, W.J. Lu, W.J. Moon, D. Zhang, Mater. Sci. Eng. A 587, 46 (2013)
X. Kai, Z. Li, G. Fan, Q. Guo, Z. Tan, W. Zhang, Y. Su, W. Lu, W.J. Moon, D. Zhang, Scr. Mater. 68, 555 (2013)
X.Z. Kai, Z.Q. Li, W.L. Zhang, G.L. Fan, L. Jiang, W.J. Lu, D. Zhang, Mater. Sci. Eng. A 530, 574 (2011)
L.J. Bonderer, A.R. Studart, L.J. Gauckler, Science 319, 1069 (2008)
L. Jiang, Z. Li, G. Fan, L. Cao, D. Zhang, Scr. Mater. 66, 331 (2012)
N. Guo, B. Luan, F. He, Z. Li, Q. Liu, Scr. Mater. 78, 1 (2014)
G. Fan, X.Z. Kai, Z. Li, Q. Guo, Y. Su, D. Xiong, W.J. Moon, D. Zhang, in The 8th Pacific Rim International Congress on Advanced Materials and Processing (Wiley, Hoboken, 2013), pp. 1379–1385
L. Jiang, Z. Li, G. Fan, L. Cao, D. Zhang, Carbon 50, 1993 (2012)
H. Xiaoxu, N. Hansen, N. Tsuji, Science 312, 249 (2006)
C.M. Hu, C.M. Lai, X.H. Du, N.J. Ho, J.C. Huang, Scr. Mater. 59, 1163 (2008)
W. Zhang, Z. Li, L. Jiang, X. Kai, X. Dai, G. Fan, Q. Guo, D. Xiong, Y. Su, D. Zhang, Mater. Sci. Eng. A 594, 324 (2014)
W. Vogel, Cryst. Res. Technol. 27, 882 (1992)
Acknowledgments
This work was financially supported by the National Basic Research Program of China (No. 2012CB619600), the National Natural Science Foundation of China (Nos. 51131004, 51071100 and 51001071), the National High Technology Research and Development Program of China (No. 2012AA030311), and Shanghai Science and Technology Committee (No. 11JC1405500).
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195.
Rights and permissions
About this article
Cite this article
Fan, G., Xu, R., Tan, Z. et al. Development of Flake Powder Metallurgy in Fabricating Metal Matrix Composites: A Review. Acta Metall. Sin. (Engl. Lett.) 27, 806–815 (2014). https://doi.org/10.1007/s40195-014-0148-x
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-014-0148-x