Abstract
Composite powder material of the Y3Fe5O12–nSiC system was synthesized by a reverse coprecipitation method to study its heat generation property in an AC magnetic field. For Y3Fe5O12 (n = 0), the maximum heat generation ability of 0.45 W·g−1 in an AC magnetic field (370 kHz, 1.77 kA·m−1) was obtained for the sample calcined at 1100 °C. The SiC addition helped to suppress the particle growth for Y3Fe5O12 at the calcination temperature. The heat generation ability was improved by the addition of the SiC powder, and the maximum value of 0.93 W·g−1 was obtained for the n = 0.3 sample calcined at 1250 °C. The heat generation ability and the hysteresis loss value were proportional to the cube of the magnetic field (H 3). The heat generation ability (W·g−1) of the Y3Fe5O12–0.3SiC sample calcined at 1250 °C could be expressed by the equation 4.5×10−4 · f · H 3 using the frequency f (kHz) and the magnetic field H (kA·m−1).
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Moroz P, Jones SK, Gray BN. Magnetically mediated hyperthermia: Current status and future directions. Int J Hyperther 2002, 18: 267–284.
Johannsen M, Gneveckow U, Thiesen B, et al. Thermotherapy of prostate cancer using magnetic nanoparticles: Feasibility, imaging, and three-dimensional temperature distribution. Eur Urol 2007, 52: 1653–1662.
Jordan A, Scholz R, Maier-Hauff K, et al. The effect of thermotherapy using magnetic nanoparticles on rat malignant glioma. J Neuro-Oncol 2006, 78: 7–14.
Maier-Hauff K, Rothe R, Scholz R, et al. Intracranial thermotherapy using magnetic nanoparticles combined with external beam radiotherapy: Results of a feasibility study on patients with glioblastoma multiforme. J Neuro-Oncol 2007, 81: 53–60.
Yoshida M, Watanabe Y, Sato M, et al. Feasibility of chemohyperthermia with docetaxel-embedded magnetoliposomes as minimally invasive local treatment for cancer. Int J Cancer 2010, 126: 1955–1965.
Lee J-H, Jang J-t, Choi J-s, et al. Exchange-coupled magnetic nanoparticles for efficient heat induction. Nat Nanotechnol 2011, 6: 418–422.
Kumar CSSR, Mohammad F. Magnetic nanomaterials for hyperthermia-based therapy and controlled drug delivery. Adv Drug Deliver Rev 2011, 63: 789–808.
Aono H, Naohara T, Maehara T, et al. Heat generation ability in AC magnetic field and their computer simulation for Ti tube filled with ferrite powder. J Magn Magn Mater 2011, 323: 88–93.
Naohara T, Aono H, Maehara T, et al. Heat generation and transfer behaviors of Ti-coated carbon steel rod adaptable for ablation therapy of oral cancer. J Funct Biomater 2013, 4: 27–37.
Naohara T, Aono H, Hirazawa H, et al. Heat generation ability in AC magnetic field of needle-type Ti-coated mild steel for ablation cancer therapy. COMPEL—The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 2011, 30: 1582–1588.
Shinkai M, Yanase M, Suzuki M, et al. Intracellular hyperthermia for cancer using magnetite cationic liposomes. J Magn Magn Mater 1999, 194: 176–184.
Ma M, Wu Y, Zhou J, et al. Size dependence of specific power absorption of Fe3O4 particles in AC magnetic field. J Magn Magn Mater 2004, 268: 33–39.
Aono H, Hirazawa H, Naohara T, et al. Synthesis of fine magnetite powder using reverse coprecipitation method and its heating properties by applying AC magnetic field. Mater Res Bull 2005, 40: 1126–1135.
Aono H, Nagamachi T, Naohara T, et al. Synthesis conditions of nano-sized magnetite powder using reverse coprecipitation method for thermal coagulation therapy. J Ceram Soc Jpn 2016, 124: 23–28.
Aono H, Moritani K, Naohara T, et al. New heat generation material in AC magnetic field for Y3Fe5O12-based powder material synthesized by reverse coprecipication method. Mater Lett 2011, 65: 1454–1456.
Nishimori T, Naohara T, Maehara T, et al. Heat generation properties in AC magnetic field for ferrimagnetic R3Fe5O12 (R = Y, Sm, Gd, Dy, Ho, Er) powder materials synthesized by reverse coprecipitation method. J Iron and Steel Res, International, Suppl 1 2012, 19: 600–603.
Aono H, Ebara H, Senba R, et al. High heat generation ability in AC magnetic field for Y3Fe5O12 powder prepared using bead milling. J Am Ceram Soc 2011, 94: 4116–4119.
Aono H, Ebara H, Senba R, et al. High heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling. J Magn Magn Mater 2012, 324: 1985–1991.
Aono H. Development of nano-sized superparamagnetic ferrites having heat generation ability in an AC magnetic field for thermal coagulation therapy. J Ceram Soc Jpn 2014, 122: 237–243.
Aono H, Senba R, Nishimori T, et al. Preparation of Y3Fe5O12 microsphere using bead-milled nanosize powder for embolization therapy application. J Am Ceram Soc 2013, 96: 3483–3488.
Nishimori T, Akiyama Y, Naohara T, et al. Effect of particle growth on heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling. J Ceram Soc Jpn 2013, 121: 13–16.
Nishimori T, Akiyama A, Naohara T, et al. Depression of particle growth with calcination at low temperature and their heat generation property in AC magnetic field for the nano-sized magnetic Y3Fe5O12–nSmFeO3 powders prepared by bead-millidng. J Ceram Soc Jpn 2014, 122: 35–39.
Aono H, Yamano Y, Nishimori T, et al. Heat generation properties in AC magnetic field for Y3Fe5O12 powder material synthesized by a reverse coprecipitation method. Ceram Int 2015, 41: 8461–8467.
Praveena K, Sadhana K, Srinath S, et al. Effect of pH on structural and magnetic properties of nanocrystalline Y3Fe5O12 by aqueous co-precipitation method. Mater Res Innov 2014, 18: 69–75.
Teraoka Y, Nanri S, Moriguchi I, et al. Synthesis of manganite perovskites by reverse homogeneous precipitation method in the presence of alkylammonium cations. Chemistry Letters 2000, 29: 1202–1203.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Open Access The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Aono, H., Yamano, Y., Naohara, T. et al. Heat generation properties in AC magnetic field for composite powder material of the Y3Fe5O12–nSiC system prepared by reverse coprecipitation method. J Adv Ceram 5, 262–268 (2016). https://doi.org/10.1007/s40145-016-0198-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40145-016-0198-9