Abstract
This paper documents an application of the acoustic emission (AE) method for structural health monitoring (SHM) of an integrally stiffened composite panel. The panel consists of a skin and two T-stringers and represents a typical part of the wing or fuselage structure. Similar design is used in civil structure parts. Quasi-static loading under compression was carried out to determine the initiation of the buckling modes. Two pieces of integral panels were tested up to failure. Both panels were monitored using 9 AE sensors in the same configuration throughout the test. The final stage of the test was recorded with a high-speed camera to obtain a detailed view of failure development. The velocity of the propagated AE elastic waves was determined experimentally before the test based on the best match of the computed and real positions of the Hsu–Nielsen sources. The determined velocity was subsequently used for AE source localization during the compression test. Different failure mechanisms were directly linked to different sources of AE using cluster analysis. Visualization of the AE location clusters was performed via the Kernel density estimation. High-speed camera images confirmed that the location of failure corresponds with the localization of a specific cluster of AE events. The AE method demonstrated the detection capability of the critical spot at 87% of the panel strength in compression. In conclusion, AE is suitable as an SHM method for damage monitoring of aerospace composite structures as well as for applications in civil structures.
Similar content being viewed by others
References
Military Handbook-MIL-HDBK-17-3F: Composite Materials Handbook, Volume 3-polymer matrix composites materials usage, design, and analysis
Rose JL (2014) Ultrasonic guided waves in solid media. Cambridge University Press, New York. ISBN 11-070-4895-8
Giurgiutiu V (2016) Structural health monitoring of aerospace composites. Elsevier, London. ISBN 978-0-12-409605-9
Ruzek R, Kudrna P, Kadlec M, Karachalios V, Tserpes KI (2014) Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part II: mechanical testing and validation. Compos Struct 107:737–744. https://doi.org/10.1016/j.compstruct.2013.09.056. ISSN 02638223
Miskiewicz M, Pyrzowski L, Chroscielewski J, Wilde K (2016) Structural health monitoring of composite shell footbridge for its design validation. 2016 Baltic Geodetic Congress. https://doi.org/10.1109/bgc.geomatics.2016.48
Crivelli D, Guagliano M, Eaton M, Pearson M, Al-Jumaili S, Holford K, Pullin R (2015) Localisation and identification of fatigue matrix cracking and delamination in a carbon fibre panel by acoustic emission. Compos Part B Eng 74:1–12. https://doi.org/10.1016/j.compositesb.2014.12.032. ISSN 13598368
Mccrory JP, Al-Jumaili S, Crivelli D et al (2015) Damage classification in carbon fibre composites using acoustic emission: a comparison of three techniques. Compos Part B Eng 68:424–430. https://doi.org/10.1016/j.compositesb.2014.08.046. ISSN 13598368
Eaton M (2008) Acoustic emission (AE) monitoring of buckling and failure in carbon fibre composite structures. Ph. D. thesis. Cardiff university, Cardiff. https://orca.cf.ac.uk/54625/1/U585014.pdf. Assessed 09 May 2017
Bohse J. Acoustic emission examination of polymer-matrix composites. BAM, Federal Institute for Materials Research and Testing Unter den Eichen 87, D-12200 Berlin, Germany. http://www.ndt.net/article/jae/papers/22-208.pdf. Assessed 09 May 2017
Holford K, Pullin R, Evans S, Eaton M, Hensman J, Worden K (2009) Acoustic emission for monitoring aircraft structures. In: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 223(5):525–532. https://doi.org/10.1243/09544100jaero404. ISSN 0954-4100
Perelli A, de Marchi L, Marzani A, Speciale N (2012) Acoustic emission localization in plates with dispersion and reverberations using sparse PZT sensors in passive mode. Smart Materials and Structures 21(2):025010. https://doi.org/10.1088/0964-1726/21/2/025010. ISSN 0964-1726
Sause MGR (2016) In situ monitoring of fiber-reinforced composites. Springer, Switzerland. ISBN 978-331-9309-538
Schumacher T, Straub D, Higgins CH, Pearson M, Al-Jumaili S, Holford K, Pullin R (2012) Toward a probabilistic acoustic emission source location algorithm: a Bayesian approach. J Sound Vib 331(19):4233–4245. https://doi.org/10.1016/j.jsv.2012.04.028. ISSN 0022460x
Prevorovsky Z (2015) Novel acoustic emission source location. Physics Procedia 70. https://doi.org/10.1016/j.phpro.2015.08.035. ISSN 18753892
Eaton M, Pullin R, Holford K (2012) Acoustic emission source location in composite materials using Delta T Mapping. Compos Part A Appl Sci Manuf 43(6):856–863. https://doi.org/10.1016/j.compositesa.2012.01.023. ISSN 1359835x
Goutianos S (2003) Compressive behaviour of carbon-fibre polymer composite materials, PH. D. Thesis, London, University of London. https://www.sems.qmul.ac.uk/research/honours/doc.php?id=199. Assessed 04 May 2017]
Liebig WV, Viets CH, Schulte K, Fiedler B (2015) Influence of voids on the compressive failure behaviour of fibre-reinforced composites. Compos Sci Technol 117:225–233. https://doi.org/10.1016/j.compscitech.2015.06.020. ISSN 02663538
Nimdum P, Renard J (2012) Use of acoustic emission to discriminate damage modes in carbon fibre reinforced epoxy laminate during tensile and buckling loading. ECCM 15-15th European Conference on Composite Materials, Venice, Italy, p 8
Srinivasa V, Shivakumar V, Nayaka V, Jagadeeshaiaih S, Seethram M, Shenoy R, Nafidi A (2010) Fracture morphology of carbon fiber reinforced plastic composite laminates. Mater Res 13(3):417–424. https://doi.org/10.1590/s1516-14392010000300022. ISSN 1516-1439
Avery DP, Samborsky DD, Mandell JF, Cairns DS (2004) Compression strength of carbon fiber laminates containing flaws with fiber waviness. 42nd AIAA Aerospace Sciences Meeting and Exhibit, pp 54–63
FlexTest_40 control system manual, DS2.42684 311 Dynamic High Force System, MTS System Corporation, June 23, 2011
Acknowledgements
The author gratefully thanks all his colleagues.
Funding
This work was funded by the Ministry of Industry and Trade of the Czech Republic in the framework of institutional support of research organisations.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author declares that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Michalcová, L., Bělský, P. & Petrusová, L. Composite panel structural health monitoring and failure analysis under compression using acoustic emission. J Civil Struct Health Monit 8, 607–615 (2018). https://doi.org/10.1007/s13349-018-0302-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13349-018-0302-7