Abstract
In recent years, rapid development in the industrial sector has offered console to the people but at the same time, generates numerous amounts of effluent composed of toxic elements like nitrogen, phosphorus, hydrocarbons, and heavy metals that influences the environment and mankind hazardously. While the technological advancements are made in industrial effluent treatment, there arising stretch in the techniques directing on hybrid system that are effective in resource recovery from effluent in an economical, less time consuming and viable manner. The key objective of this article is to study, propose and deliberate the process and products obtained from different industries and the quantity of effluents produced, and the most advanced and ultra-modern theoretical and scientific improvements in treatment methods to remove those dissolved matter and toxic substances and also the challenges and perspectives in these developments. The findings of this review appraise new eco-friendly technologies, provide intuition into the efficiency in contaminants removal and aids in interpreting degradation mechanism of toxic elements by various treatment assemblages.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
Introduction
Globally, the growth of any country can be absolute based on its industrial growth. Industrial sectors can be of various types based on the products. Rapid industrialization and its concentration in or near urban centers have placed very high pressures on the carrying capacity of the environment at specific locations. At these locations, water bodies such as rivers, lakes, and coastal waters have typically been severely affected by the release of the contaminants into them. Industrial wastewaters are effluents that result from human activities which are associated with raw-material processing and manufacturing. These wastewater streams arise from washing, cooking, cooling, heating, extraction, reaction by-products, separation, and quality control resulting in product rejection. Older method of treatment, which is built with the centralized point of view, is showing less effectiveness which ultimately leads to the ever-increasing accumulation of the effluents. With the development of new methods has reduced the hardships caused by the older ones. Wastewater treatment plants are developed to improve the water quality significantly to meet the safety requirements of the effluent after treatment. Various treatment methods reduce the concentration of pollutants in water and also eliminate the content of suspended solids, whose molecules can contaminate the rivers and impede the movement of water in the channels and pipes after deposition. It also degrades the content of biodegradable organic matter, measured by the Biological Oxygen Demand (BOD).
Wastewater treatment is required as a part for reducing contaminants to a sufficient degree to obtain potable water. Therefore, the treatment plant is to be designed in such a way that it takes into consideration some parameters in the influent that is required to be controlled to enhance the efficiency of the treatment plant. Due to uncontrolled entry of wastewater effluent into the environment and the transportation of contaminants into anthropoid system, environmental protection requires the use of suitable purification/treatment systems with high removal efficiency for contaminants are needed. Economically, effective wastewater treatment has important effects on saving water, and preventing unnecessary water scarcity. This study focuses on summarizing the treatment methods of effluent generated by various industries and its efficacy in removing the pollutants, taking into account the characteristics of wastewater and geographical location of the relevant industries.
Industrial growth and its impact
Industrial development plays a key role in economic growth of a country. Industrial evolution is obligatory for rejuvenation of agriculture since chemical fertilizers, pesticides, weedicides etc. are all industrial products that are vital to increase the productivity and also, it uplifts the progress of science and technology. Critical lack of capital is the foremost issue of Indian economy. With the assistance of apparent and interior wealth, industry can acquire greater profit that can be revived for growth and development. Industrialization aids in the advancement of trade. Concerning international trade, import substitute product production and export promotion are necessary to meet the deficit in balance of payments that are achieved through industrial development. The production and consumption of electricity lead to environmental impacts which must be considered in making decisions on the way in which to develop energy systems and energy policy. All forms of electricity generation, and indeed all parts of the fuel chain that have impacts, both positive and negative. In the decision-making aspect of the process, consideration of the real energy needs of the country and the values of the society must be taken into account.
Statistical inference on global industrial growth:
Figure 1 is the graphical representation of industrial widening of BRIC countries in recent decade (2012–2021) which interprets that there are several industries that conceals these countries with reference to their imports which is unable to give over in terms of trade development. The key finding is that life science industrial products ranks high marketing rate (~ 70%) and at the same time, generating greater amounts of toxic effluents (Devi Prasad Dash et al. 2021). COVID-19 influences the industrial broadening of BRIC countries that leads to 50% reduction in their growth, however, yet shows superior global average. The worldwide industrial production is intensified by the reports that quarterly explored the circumstances of the global industrial development and its outlook. This outline deals with structural changes in the course of industrial growth such as:
-
Brief series of economic crisis since early 2000s
-
Extensive crisis
-
Prolonged crisis overcoming
-
Assailing national liability
-
Stagnation and setback of industrial growth leading to a static total propensity.
And also, the time from the outbreak of the world economic crisis and depicts the essentially changed process of the crisis overcoming. Industrial production in the MIST (Mexico, Indonesia, South Korea, Turkey) countries with a 6% share of machinery exports are evolving after stagnation and decline in the first quarter of 2020 and has its basis in the period after the global economic crisis. China’s industrial production increases by 9% yearly and those of India by 3.4% and Russia by 2% per annum. In the previous global economic crisis of 2008, China had bit alleviated the slump in industrial growth in industrialized countries (Avunduk et al. 2019). On the other hand, no OECD (Organization for Economic Co-operation and development) data are available for Brazil and India for the first quarter of 2020.
Critical environmental impacts
Unconstrained industrial wastewater is the probable origin of spontaneous release of hazardous substances into the environment. It has been identified that wastewater generated by various industries leads to health effects such as cancer, immune function disorders, lung and respiratory diseases (Upadhaya et al. 2017). State Inspectorate for Environment Protection (PIOS) reported that, about 60% of wastewater creates potential or actual threat to public health and the environment. For safer and reliable wastewater management, risk assessments such as hazard identification, exposure assessment and risk characterization are to be considered (Buczyńska et al. 1999).Generally, industrial effluent carries certain disease-causing bacteria such as E.coli, Salmonella etc., that leads to cholera, typhoid fever and other allergic symptoms (Tiffon C et al. 2018).
In recent years, there have been the development of a disease namely byssinosis, is a fatal disease caused to the people working in textile industry on account of excessive exposure to cotton dust. Myeloid leukemia, a disease majorly caused to workers in organic chemical industry due to their over exposure of formaldehyde without much safety measures taken in prior (Gaur VK et al. 2020). “Asthma-like syndrome” is a nonallergic respiratory condition that is identical clinically to asthma but is not associated with persistent airway inflammation or airway hyper reactivity. As the pulmonary deterioration can often be detected only by cross-shift testing, it can be difficult to document this in a typical clinic setting (Etim MA et al. 2021). The cross-shift decline in FEV1 is generally less than 10% but can be between 10 and 15%. It is most common in swine confinement workers, up to 10% acutely, but can also be seen in grain workers of agricultural industry.
Extensive sources of industrial effluent
Electric power plants
Electric power plants are one of the largest industrial sectors that is involved in meeting the electricity requirements throughout the world. There are few major unit processes involved in electric power plants. First, the fuel materials are transported to the power plants and are pulverized to increase the efficiency and stored. Then, the fuel is burnt and the heat produced is sent to boilers that in turn changes the liquid into steam (Srikanth 2015). The obtained steam is then allowed to pass through the turbine where the turbine starts to rotate and produces electricity. Finally, the steam is passed through the condenser which condenses the outlet steam from the steam turbine in the form of pure water. The water is then pumped back to boiler.
Amongst the above-mentioned stages, condensation of the steam produces waste water effluents. Though wastewater effluent parameters do not exceed the sewer system limit, they exceed irrigation standards that are of concern. The methods involved to treat the effluents from electric power plants are depicted in Fig. 2 and the studies that reported on parameters involved in effluent analysis of electric power plants are detailed in Table 1.
Battery manufacturing industry
Battery industry is represented as one of the most important toxic and hazardous industry. Generally, the batteries are made up of a positive electrode, a negative electrode and an electrolytic solution. The manufacturing process involves oxide milling, grid casting, paste manufacturing, grid pasting, plate curing, plate parting and battery assembly (Rahangdale et al. 2012).
The manufacturing industry uses water for the preparing reactive materials and electrolytes, for depositing reactive materials in the surface. As a consequence, wastewater is generated and is characterized based on the high levels of cadmium, Nickel, silver and also depends on the process adapted in battery making.
Nuclear power plants
The Nuclear power plants produce radioactive substances as effluents which are released in airborne and liquid forms. Airborne effluents are released mainly by nuclear fission and activation of gases like tritium. Both Pressurized Water Reactor (PWR) and Boiler Water Reactor (BWR) release these effluents (Efremenkov VM 2014). The instability in airborne effluent is based on designs and operations of radioactive waste management, effluent control systems and analytical methods that are employed to monitor the effluent.
Liquid radioactive effluents that are released in surface water are monitored prior to authorize release to the sea. In addition, uncontrolled leaks of liquid radioactive effluents due to fission activities have resulted in contamination of groundwater. Tritium activity in liquid effluents is much higher for PWR than BWR. Currently, nuclear plants typically release a few curies of tritium in liquid effluents due to the mixed fission and activation products. The method available for the reduction of Liquid effluents produced by the nuclear power plants is illustrated in Fig. 3. Table 2 shows various commonly reported categorized radionuclides.
Mines and quarries
Mining generally refers to the process of removing of rocks, sand and other minerals from the ground. The place where the mining takes place is called as quarries. This industry generally pollutes all the form of natural resources that surrounds them (Kuyucak et al. 2008). Majorly, the waste water released from mines and quarries are highly toxic in nature. These highly toxic metals influence the water bodies and leads to several diseases. The effluents released are treated in different process that includes Neutralization, Chemical oxidation, Biological Treatment and Co-precipitation.
Petroleum industries and petrochemicals
Petroleum industries produce both liquid and gaseous pollutants. Gaseous pollutants are easier to manage compared to liquid pollutants. Effluent Treatment Plant (ETP) can efficiently treat the liquid pollutants to protect the environmental pollution (Saha PD et al. 2015). The treatment systems for the effluents produced by the petroleum industries (Table 3) involves removal of coarse suspended and floating matters, oil, grease, organic solids through biological processes, colloidal particles and refractory organics. The oil–water separation method is widely practiced in American Petroleum Institute (API) to separate oil and grease.
Organic chemical-manufacturing industries
Amongst all the industries, the chemical industries impose a great impact on the environment. The wastewater released from this industry is generally highly concentrated with organic and inorganic pollutants which may be toxic (Fayza NA et al. 2007). Most of the effluents released are observed to possess mutagenic, carcinogenic, and non-biodegradable properties. Most common methods are used for the treatment of chemical effluents such as dissolved air floatation, de-emulsification, gravity separation, skimming, coagulation and flocculation.
Iron and steel industry
In iron and steel industry, wastewater generated from coke oven by-product plant is considered to be the most polluting. This wastewater contains toxic chemicals like phenol, cyanide, and ammonia which are harmful to the receiving water bodies. Various harmful effects of the untreated wastewater from steel industry are reported to be toxicity to aquatic life, reduction of Dissolved Oxygen (DO) silting due to suspended solids (Ammonia and phenol released in the effluent increases pH of the water and thus is responsible for the toxicity. Due to the discharge of biodegradable organic substances into the water bodies, the soil and bacteria use the organic matter as carbon source and cause reduction in the DO level in the water. Hazardous effects caused by the effluents of this industry are listed in Table 4.
Entrapped oil and grease from the effluent lead to the formation of slicks and poor aesthetics. In the existing plants, Coke Oven by Product (COBP) wastewater is treated by biochemical oxidation of cyanide, ammonia and phenol. These effluent treatment plants are commonly known as Biochemical Oxygen Demand (BOD) plants. Different oxidation techniques had been implemented to reduce pollution, mainly caused by organic compounds.
Food industry
The waste water released from the food industry causes environmental pollution due to its high Chemical Oxygen Demand (COD) and BOD content. In comparison with other industries, food industry requires great amount of water, since it is used throughout most of plant operations. Noukeu NA et al. (2016) reported the variation in BOD/COD, total solids and suspended solids in the effluents of these industries. This is due to the different additives used for various food products. Chocolate industry is among the most polluting of the food industries with regards to its large water consumption. Different methods of effluent treatment in food industry are depicted in Fig. 4.
Various treatment methods in food industry
Dairy industry
Generally, the waste water generated from the dairy industry contains high amount of solid organic compounds. The dairy industry mainly handles large quantity of milk that contains large quantities of milk constituents like casein, inorganic salts (Raghunath BV et al. 2016). The quality of the effluent is majorly determined by quantity of milk processed and the type of product manufactured. Characteristics of dairy effluent are illustrated in Table 5. The effluent treatment in dairy industry is majorly done by the physicochemical methods like chemical precipitation, coagulation/flocculation, membrane process, etc., which have up to 98% efficiency.
Oil extractive mills
Edible oil is one of largest used product in households. These oils are manufactured in mills where they undergo different process like cleaning the seeds, grinding, pressing, extraction of oil, bleaching, deodorization, pre-chilling and packing. Mostly, the wastewater is generated from the bleaching process and the ETP unit (Rajkumar K et al. 2010). The effluents undergoes primary treatment and undergoes secondary process like physicochemical (Air Flotation, Coagulation, Flocculation) and biological process.
Leather industry
Leather industry is one of the fastest growing and most polluting industries globally. The leather processing is responsible for the unfavorable conditions of environment. The leather obtained by processing is used for various purposes like shoes, textile, carry bags and many more. For this, huge numbers of raw materials is collected and are subjected to chemicals for obtaining the complete finished product (R Belaabed et al. 2014).
Generally, the skin of the animals is mainly composed of water, protein and fatty materials. Leather manufacturing undergoes stages such as: preparatory, tanning and crusting. The unwanted raw skin and hairs are removed through soaking, unhairing, liming, de-liming and bathing. During tanning process, unstable raw materials are converted to leather with adequate strength properties and resistance to biological and physical attacking agents (Mirulanini V et al. 2017). Most commonly used tanning agent is chromium (Cr(III)) salt that is added after pickling to increases the pH of the hide and to obtain leather of higher thermal and bacterial resistance. The chromium tanned leather contains about 2–3% of dry weight of chromium salts.
The wet processing includes re-tanning with chromium and also addition of some dye and fats for improving the smoothness and color and after several process of drying and re-tanning, the product is available in the form of crusts. The crusts obtained is subjected to undergo the finishing process (Tapan Biswas et al. 2013). Finishing process is undergone to obtain softer and clean leather as product. The finished end product has about 65–80% of the dry weight of chemicals used. In leather industries, water is used mainly in the tanning process. In addition to the usage of water in every individual step, water is also used in vacuum dryer.
Pharmaceutical industry
Pharmaceutical is one of the major industries that pollute the water bodies in large amount as they use about 99% of water for the production of excipients. The water released from this industry is basically from drug manufacturing area that consists of various toxic elements that are harmful for both human and animals. Various treatment methods like membrane filtration, reverse osmosis, flocculation and coagulation are applied to reduce the presence of elements like BOD, COD, TSS, TDS from the effluent (Azizi E et al. 2017).
Agriculture industry
Commercial agriculture industry consumes large volume of water from different sources and generates a huge amount of waste water. These wastewaters generally consist of pollutants like organic matters, inorganic matters (dissolved minerals), Nutrients (Nitrogen, Phosphorous, Potassium), Toxic chemicals, Pathogens (Levy GJ et al. 2011). Various filtration processes involved will remove fertilizers, Manure, Suspended solids, Virus & Bacteria, BOD, COD, Pesticides.
The effluent treatment in agriculture industry involves in mechanical methods like filtration, sedimentation, separation, flotation, crystallization or in biological methods like activated sludge at anaerobic conditions and also in physicochemical methods like electro-coagulation, coagulation and flocculation, ozonation (Oron G et al. 2012).
Textile industry
Textile industry is one of the largest and oldest industry presents in the world. Out of various processes in textile industry, contribution of chemical processing is about 70% of the pollution (Desai PA et al. 2011).
The effluent treatment in textile industry involves the removal of suspended solids and to reduce the quality of effluent using methods like screening, sedimentation, neutralization, Mechanical flocculation and chemical coagulation (Khandegar V et al. 2013). The secondary treatment mainly involves the removal of colloidal and dissolved organic compounds and also for the removal of dyes/color present in the waste water which is usually done using aerated lagoon, anaerobic digestion, trickling filtration and then the tertiary treatment is usually done to increase the efficiency of the little contaminated water obtained from the above process to release into waterbodies without any problems to the waterbodies which is obtained by various methods like oxidation technique, Electrolytic precipitation, membrane technologies.
Paper and pulp industry
Paper and pulp possess a huge impact on our everyday life. The paper and pulp industries produce huge quantities of biomass (Hubbe et al. 2016). The production of pulp and paper involves many steps such as Debarking, Chipping, Pulping, Bleaching and various studies on the variants of pulp and process parameters are described in Table 6.
The effluent treatment in paper and pulp industry usually involves primary treatment methods like sedimentation, flotation, filtration and the Secondary treatment (biological) such as activated sludge, aerated lagoons, anaerobic treatment (Hydrolysis, Acidogenesis, Acetogenesis, Methanogenesis) and sequential treatment. Tertiary treatment involves membrane separation (Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis), coagulation/precipitation, and ozonation (Table 7).
Industrial wastewater and reserves rehabilitation
Issues such as water shortage, nutrient needs, and low fossil energy consumption could be conquered by implementing resource recovery technologies. Various products can be recovered from wastewater apart from nutrient, energy and reusable water. There are wide range of recovery strategies available that sustain that includes chemical production, raw commodity chemicals, energy recovery, fertilizers, animal feeds and consumer products (Silva B et al. 2021). Techniques like partition-based biological process, acid-bioleaching, thermo- and meso-anaerobic digestion, bio-precipitation using bioelectrical system, trans-esterification (separation) are in practice for the effective recovery of valuable products such as biochar, single-cell protein-based foods, bioplastic, struvite (MAP—Magnesium, Ammonia, Phosphate compound), biogas, metals, radionuclides, etc. (Hussain MI et al. 2019). Resource recovery and reuse (RRR) strategy is being broadly implemented in wastewater treatment plants for purification and reuse of resources.
Water reclamation and reuse technologies (desalination/long-distance fresh water transfers) are considered to be a more feasible choice driven by water scarcity due to unbalanced global fresh water administration and water stress due to climate change. Advanced treatment lines are required to encounter the firm permissible quality for microbes and micro-pollutant concentrations in reclaimed water, since water retrieved after secondary treatment contains residual concentration of organic micro-pollutants like polychlorinated biophenyls, pesticides, pharmaceuticals, etc. Technologies such as: (Meeroff DE et al. 2019).
-
Filtration
-
o
Membrane-based: micro-, ultra-, nanofiltration and reverse osmosis
-
o
Non-membrane: sand and biochar filtration, trickling filter, activated carbon (granular/biological)
-
o
-
Disinfection: chlorination, UV radiation
-
Advanced oxidation process: ozonation, Photocatalytic oxidation, cavitation, use of fenton/H2O2
are employed to reclaim water from wastewater treatment plants. Table 8 represents technologies for the recovery of valuable substances from different industrial wastewater.
Aspects of wastewater effluent
Wastewater contains numerous contaminants and toxins which are considered as most serious threat to the ecosystem and public health. In general, wastewater is characterized as: (i) Physical: Temperature, turbidity, total suspended solids, color, odor (ii) Chemical: COD, TOC (Total Organic Carbon), heavy metals, Dissolved Oxygen (DO), toxic substances, pH, phosphorus, sulfur, chlorides and other trace elements (iii) Biological: BOD, microbes such as bacteria, viruses, parasites, oxygen required for nitrification and microbial population (Zhuang LL et al. 2019) Upon releasing the water containing these impurities into surface, ground and sea water, there occurs nutrient depletion, disorderliness of water quality, and bringing down the DO content which in turn affects the aquatic ecosystem. Feed and produced water quality, and production process mainly determines the feature, quality, composition and volume of the effluent, which in turn directs the cost for effluent disposal and treatment methods. Contaminants of wastewater could be either organic (phenols, aromatic hydrocarbons, pesticides, phenols, etc.), inorganic (nitrogen, phosphorus, sulfur, chlorides, heavy metals like Cd, As, Pb, Hg, Zn, Ag, Ni etc.), radioactive (nuclear material); according to which pre- and post-treatment systems are implemented.
Moreover, other industrial effluents such as manufacture of cement, cannery, metal container, synthetic resins and polymer, soft drinks, soap and detergent, viscous rayon, gelatin, explosives, bleach-liquor, dye, asbestos, chlor-alkali, metal pickling, coffee pulping, slaughter house, meat pickling, etc., contributes in environmental pollution/degradation in addition to the major industrial wastewater. Therefore, effluent treatment plants that comply with the terms of regulations specifying the characteristics of the effluent that is discharged in water stream are in need to secure ecosystem and public health.
Salient pollutants of concern in industrial effluent and their effects in environment and public health
The major contaminants in wastewater are nitrogen and phosphorus, hydrocarbons, heavy metals and microbes.
Nitrogen and phosphorus
Ammonia is generally present in wastewater, which is the main form of nitrogen, is known to be toxic. The intake of nitrate containing water could lead to methemoglobinemia, also called as blue babies syndrome in infants and other susceptible individuals (J. Ruiz et al. 2011). Phosphorus is considered as one of the major eutrophic nutrient which have an impact on accelerating the chlorine content required for disinfection of water bodies, which could enhance the increasing risk of cancer and leads to the stimulation of harmful microbes such as P. fisteria that causes and eye and respiratory irritation.
Hydrocarbons
The existence of hydrocarbon pollutants in wastewater effluents leads to several environmental and health impacts such as threat to fishery, marine habitats of wildlife, human health, and leads to demolition of ecological balance (Mohammadi L et al. 2020).
Heavy metals
Heavy metal found in the effluent have a tendency of binding with proteins, thus altering their confirmation and inactivating them, which often results in health complications such as skin irritations, vomiting, nausea, anaemia, disturbing protein metabolism, etc. (Akpor OB et al. 2014). Heavy metals such as zinc, copper, nickel, arsenic, etc., are known for their toxicity, even at extremely low concentrations, due to which, they cause detrimental threat to human health and the flora and fauna of receiving water bodies.
Microbes
The major pathogenic protozoans present in the industrial wastewater are Giardia and Cryptosporidium that have the capacity to cause acute and chronic diseases with short- and long-term effects (Dadrasnia Arezoo et al. 2017), such as degenerative heart diseases and stomach ulcers with severity.
Consequently, due to large-scale industrialization and increase in population density, the society is faced with issue regarding wastewater management. The effluent generated due to industrial activities comprises a prime cause of pollution, which is of great concern on water quality management. Moreover, the hazard of non-biodegradable and intractable pollutants in water is their potential to exist in natural ecosystems for a prolonged period and have their ability to accumulate in consecutive levels of biological food chain. Considering the mentioned destructive impacts, variety of treatment processes is required for the wastewater effluent before being discharged into the environment.
Strategies involved in wastewater treatment
The process of wastewater treatment involves collection of effluent from industries via underground drainage system and subjected to treatment plants wherein, water is put through various treatment levels such as primary, secondary and tertiary. Initially, stages such as screening (unit operation) and odor control are performed prior treatment to prevent stinking and clogging by eliminating materials like plastics, paper, etc. and using chemicals for neutralization. Coarse screens are employed for the removal of large solids and debris, whereas fine screens for removing substances that creates operational and maintenance issues in downstream processing (Bhandari VM et al. 2016).
Primary treatment
Primary treatment involves separation or removal of precipitable organic and inorganic contaminants from the water by treating them in large tanks for the sedimentation of biotic solid matter at the surface of tanks, which are then, detached using scrappers for grit removal. Treatment units such as settling tanks/clarifiers, septic tanks, anaerobic and UASB (Upflow Anaerobic Sludge Blanket) are integrated in this stage. Additionally, comminutors and grinders are utilized for shrinking the coarse solids so that floating and settle-able solids can be removed during downstream treatment operations (Alvim CB et al. 2020), Currently, detritus tanks are implemented whose fundamental function is to gather utmost quantities of fine particles from the water by enhancing the detention time, whereas organic materials will be existing in the water for subsequent treatment levels (Brown AK et al. 2018). Thus, primary clarification/treatment aims at providing compatible water for the next (secondary treatment) levels.
Preliminary treatment: screening—grit removal
Wastewater contains a large amount of solids and grits that can cause damage to the treatment equipment. This can be removed by the process screening. Screen is a device with openings, generally of a uniform size, comprises of coarse suspended and floating solids which are present in a wastewater stream. The screening element comprises of parallel bars, rods or wires, and the openings generally have circular or rectangular slots. The smaller the screen opening, greater the quantity of the screenings (Meerbergen K et al. 2018). Grits are heavy inorganic solids such as sand, metal fragments, egg shells that are heavier than the organic biodegradable solids in the wastewater. Removal of grit prevents unnecessary abrasion and wear of the mechanical equipment. A grit chamber may be horizontal flow or vertical flow and is manually or mechanically cleaned. Grit of a properly designed and operated chamber is free from organic matters which may be used as land fill (Hoiberg B et al. 2021). If grit contains organics in high proportion, it is disposed of by burial or used as manure.
Sedimentation
Sedimentation is a treatment process in which suspended particles, like flocs, sand and clay are removed from the wastewater. This process happens naturally when water is still, because gravity will pull the heavier sediments down to form a sludge layer. The advantage of sedimentation is that it minimizes the need for coagulation and flocculation. Additionally, sedimentation can be used after coagulation to increase the effectiveness of ongoing filtration in the process (Chu BT et al. 2018). Sedimentation wastewater treatment requires specialized tanks. A sedimentation tank provides the necessary support to make sure the particles settle. The types of sedimentation tanks used are Horizontal flow tank, Multi-layer tank, Radial flow tank, Floc blanket sedimentation and Settler tank.
In addition, techniques such as centrifugal separation, neutralization, gravity separation, induced/dissolved air flotation, ultrafication, etc. are employed in primary treatment stage.
Secondary treatment
Secondary treatment process involves the use of microbes (so-called biological treatment) that metabolize the organic matter present in the water and generates inorganic by-products, after which, microbes are eliminated via sedimentation method. This treatment process is categorized into two groups. First, activated growth process or fixed film process that includes contact bed, intermittent filter, trickling bed, rotating biological contactor, according to which, the biomass is made attached to inert medium such as rock, ceramic, plastic, slags etc., for the conversion of organic matter (Raju S et al. 2020). Second, suspended growth processes that embraces activated sludge process, aerated lagoons, oxidation ponds, which involves suspending the microbial cells naturally or mechanically for organic matter conversion (Kumar R et al. 2019). Hence, residual organics and suspended solids from primary treatment, are removed through secondary treatment and thereby making the water consistent for tertiary treatment.
Activated sludge
The activated sludge is a biological process which takes place after the primary sedimentation. The wastewater obtained from the primary treatment still consist of some suspended and colloidal solids which is agitated in presence of air the suspended solids form nuclei on which biological life develop and gradually build up to larger solids (Zhang H et al. 2019). Generally, the activated sludge is a brownish floc-like substance consisting of organic matter obtained from the wastewater and inhabited by myriads of bacteria and other forms of biological life. Activated sludge with its living organisms has the property of absorbing or adsorbing colloidal and dissolved organic matter. The biological organisms utilize the absorbed material as food and convert it to inert insoluble solids and new bacterial cells. Much of this conversion is a step-by-step process. Some bacteria attack the original complex substances to produce simpler compounds as their waste products (Sepehri A et al. 2020). Other bacteria use the waste products to produce sill simpler compounds and the process continues until the final waste products can no longer be used as food for bacteria. The activated sludge must be kept in suspension during its period of contact with the wastewater being treated by some method of agitation so that they do not get settled in the bottom.
Trickling filter
Trickling filters are used to remove organic matters from the wastewater occurs under aerobic treatment of wastewater. The trickling filter consists of a cylindrical tank and is filled with a high specific surface area material, such as rocks, gravel, shredded PVC bottles, or special pre-formed plastic filter media. A high specific surface provides a large area for biofilm formation. Organisms that grow in the thin biofilm over the surface of the media oxidize the organic load in the wastewater to carbon-dioxide and water, while generating new biomass (Liang Q et al. 2020). The incoming pre-treated wastewater is ‘trickled’ over the filter, e.g., with the use of a rotating sprinkler. In this way, the filter media goes through cycles of being dosed and exposed to air.
Aerated lagoons, contact media, disk contractors, extended aeration, high rate activated sludge are some other methods applied in secondary treatment stage.
Tertiary treatment
Tertiary treatment of wastewater is required to remove the enduring contaminants/nutrients/pathogens that accomplish over preliminary treatment level, to meet reuse quality standards and to make the treated water appropriate for land applications and direct discharge into water bodies like rivers, lakes, ponds, etc. It involves steps such as nutrients removal, disinfection, ion-exchange, membrane process and filtration. Advanced oxidation process falls under this treatment which aims at components necessary to the toxic activity so as to achieve capacity to influence the discrete toxic effect on the compound. Recent findings reported that tertiary filtration and chlorine disinfection are effective in reducing the emerging environmental contaminants like antibiotic resistance gene in the wastewater effluent.
Disinfection (UV/chlorination)
Killing, removal or destruction of microorganisms is generally referred as disinfection. These disinfectants are added in the wastewater treatment to resist against the microorganisms present in the contaminants. These can be done either by chlorine or by UV radiation (Azuma T et al. 2021). Chlorine is generally a greenish-yellow gas while applying a high pressure it gets changed from gas to liquid. Introduction of chlorine to water plays a very effective role for removing almost all pathogenic microorganisms. While, UV or Ultraviolet rays also been used extensively in the tertiary treatment. The UV light causes disinfection by changing the biological components of microorganisms specifically breaking the chemical bonds in DNA, RNA, and proteins and the radiations also control the regrowth potential within the distribution system.
Techniques involving granular/activated carbon, reverse osmosis, electro-dialysis etc. are in existence in tertiary treatment step.
Different techniques of effluent treatment
Table 9 reports the various methods employed for effluent treatment. Some of the most common treatment methods include membrane filtration, adsorption, photocatalysis, electro-coagulation, bioaugmentation, ozonation.
Membrane filtration
Wastewater containing heavy metals such as copper and cadmium are produced by industries such as textile; to which the technologies like Reverse Osmosis (RO) and Nanofiltration (NF) are applied to remove those heavy metals in the form of ions. Studies have reported that the technique of membrane filtration is capable of removing more than 90% of the copper ion existing in the effluent (Gunatilake SK 2015). This technique entails bonding the metals to a particular bonding agent from the wastewater stream by separation processes for which a hybrid process of flotation and membrane separation is employed by combining the microfiltration modules right away into the flotation rector.
In pharmaceutical industry, membrane filtration accounts almost 9% for the removal of effluents. The purpose is to remove viable and non-viable particles to clarify or sterilize the solution. The size of the pores in filters also responsible for the separation as the screen allows particles of a specific size through but traps molecules that are too large to fit through the pores (McKinnon BT et al. 2018). One of the main advantages of using filters is for testing end product sterility. The rate of flow through a filter is affected by the resistance of the filter, the viscosity of the solution, and pressure which sometimes make them less efficient in the removal of effluents.
Adsorption
Adsorption by solid adsorbents is one of the potential methods for the removal of dissolved organic contaminants such as dyes, from the industrial wastewater. Adsorption with active carbon is frequently employed as tertiary purification for the elimination of organic micro-pollutants and metals in organic complexes from wastewater (Lakherwal D. 2014). Adsorbents such as zeolites are used for the removal of iron, ammonium, nitrate, manganese or heavy metals from the effluent. The superiorities of this technique are low cost, simple operation, high efficiency and ability to utilize adsorbent materials from different sources.
This process is mainly carried out in textile industry for the removal of the dye from the effluents generated. Particularly, nanoscale materials like hydrogel are great adsorbers of dye materials. The main advantage of using hydrogel for its high flexibility along with its ability to interact with other nanoscale adsorbents particularly for purification process (Van Tran V et al. 2018). But sometimes, due to the infusion of filamentous organisms in gels, chances of contamination of the organisms may occur.
Photocatalysis
Photocatalysis is a promising method for the treatment of contaminated water. This method makes use of sunlight, thereby it is cost-efficient, eco-friendly, and invariably applicable. Photocatalysis is used to break down a broad variety of organic materials, dyes, crude oils, microbes, inorganic molecules such as nitrous oxide, and in combination with precipitation and filtration, used to remove heavy metals (Mahalingam S et al. 2018). In addition to water purification, this method with nano-based catalysts is used to prevent air pollution and in building materials for self-cleaning surfaces. Titanium oxide (TiO2) is the most commonly used photocatalyst for which UV irradiation from sunlight or artificial light is required for its activation.
This method is mainly used in oil manufacturing industry, for the removal of phenolic compounds. TiO2 is a semi-conductor photocatalytic used in reduction and removal of these harmful and toxic compounds produced from wastewater. This is highly feasible process for the treatment of both produced waters and waste water runoff from garage forecourts (Chen D et al. 2020). But one of the greatest disadvantages in this process is poor electric adsorption and treatment of highly concentrated organic pollutant.
Electro-coagulation
Treatment of industrial effluent by electro-coagulation is an efficient method to remove number of pollutants such as organic materials, colorants, minerals and heavy metals. Studies have reported that this technique could be employed for the simultaneous removal of aluminium (from the electrodes) and chromium (in the effluent) accommodated in the effluent (Syam Babu D et al. 2020). This method can eliminate organic and toxic pollutants that are dissolved in wastewater by direct or indirect oxidation. The electrochemical reaction generates strong oxidants such as hypochlorite, hydrogen peroxide on electrolysis, which destroys the pollutants in the effluent.
In tannery industry, electro-coagulation is one of the most efficient technology as well as low operational cost. This provides a direct connection between metal electrode immersed in wastewater. The current causes the dissolution in metal electrode and dissolves metal ions form coagulated particles and metal hydroxides (De La Luz-Pedro A et al. 2019). Sometimes, the electrodes may dissolve into wastewater stream as a result of oxidation, which needed to be changed often.
Bio-augmentation
The inflating application of enzymatic treatment is generating an increasing demand for biocatalysts that reveals better characteristics. Enzymes remove recalcitrant pollutants by precipitation or transformation to other products by precisely acting on them (Nzila A et al. 2016). Enzymatic processes are considered as clean and green and provide advantages such as rapid, ease of operation and control, and pliability to change in temperature.
Bacillus species is mainly used in agricultural industry, by bio-augmenting the number of microorganisms in the wastewater increases rapidly which in turn able to speed up the biodegradation of the contaminants (Pandey AK et al. 2017). Using microorganisms specifically adapted to digest certain type of contaminants can help make bioaugmentation more successful. While they have its own advantages sometimes due usage of wrong type of bacteria can result in clogging of contaminants.
Nanotechnology
Nanotechnological processes such as nanofiltration, nanomaterials for catalysis, photocatalysis, water disinfection, adsorption of pollutants, nanoscale zerovalent iron (nZVI) play a vital role in removing various types of contaminants and permits high degree of water purity. Nanotechnology offers a wide range of solutions for membrane materials such as ceramic nanomembranes, polymers with metal oxides, carbon nanotube, zeolites, aquaporin, etc. The three types of nanomaterials that can be regarded as the promising ones are nanoadsorbents, nanomembranes and nanocatalysts. There are certain factors that influence the production of nanomaterials such as:
-
Practical opposition on the use of specific nanotechnologies
-
Production and operating costs
-
Effects on human life and environment
The nanoparticles are mainly involved in the decolorization of textile dyes and the remediation of textile effluents. Numerous types of nanoparticles are used for the purpose and are unique based on their physicochemical properties. Also, nanoparticles are used as adsorbent for the removal of heavy metals are non-toxic and have high adsorption capacity and to adsorb pollutants in less concentration, adsorbed pollutants that can be easily removed from adsorbent surface and can be recycled for numerous times (Palmieri V et al. 2021). The smaller size of the nanoparticles increases the surface area which enhances the chemical activity and adsorption capacity of NPs for the adsorption of metals on their surface. The frequently used NPs for the adsorption of heavy metals are activated carbon, carbon nanotubes, manganese oxide, graphene, zinc oxide, titanium oxide and ferric oxides.
Nanotechnology is used in food packing sector in form of nanosensors or carbon nanotubes are used for rapid detection of microbes present in the food materials. Generally, toxin antibodies are connected with the nanotubes which indeed cause a detectable change in conductivity during the detection of water borne toxins present in them (Enescu D et al. 2019). These tubes are further used for detection of aroma or gases released by the food items by giving signals.
Nanotechnology used in medical field in form of magnetic nanoparticles (magnetic Fe3O4) as a contrast agent for magnetic resonance imaging, comprehensive in vitro/in vivo toxicity studies have already been carried out (Nikolova M et al. 2020). Through this technology, a bandage has been introduced electrical pulses to a wound using electricity produced by nanogenerators worn by the patient. For trauma patients with internal bleeding another way to reduce the blood loss is needed are developing polymer nanoparticles that act as synthetic platelets. Lab tests have shown that injection of these synthetic platelets significantly reduces blood loss.
Ozonation
Ozone can be constructively used for the treatment of municipal and industrial wastewater. It is a powerful oxidant and leaves no residual harmful product and no sludge disposal problem and accelerates the DO content of wastewater which aids additionally in the degradation of residual pollutant. Investigations reveal that ozone is effective 25 times more than hypochlorous acid, 2500 times more than hypochlorite, 5000 times more than chloramines; so that this technique finds application in various fields of wastewater treatment (Ledakowicz S et al. 2017). This technique has variety of industrial applications such as paper and dyeing industry effluent treatment for color removal, treatment of toxic and cyanide waste, eradication of heavy metals and phenols from wastewater, deodorization and treatment of gaseous effluent, etc.
Ozonation is mainly used in food industry, mainly for the production of black pepper in substitute of ethylene oxide for the decontamination of whole black peppercorns and ground pepper balls (Upadhyay et al. 2017). Ozone treatment of ground black pepper resulted in slight oxidation of volatile oil constituents but ozone had no significant effect on the volatile oils of whole peppercorns.
Table 10 shows the recent trends/advancements in treating the effluent from various industries. Since conventional methods are found to be expensive and not suitable for small-scale process, employment of hybrid system for treating wastewater effluents overcomes the drawbacks while requiring low capital investment, less labour-intensive and economically feasible and accessible.
Stripping
Wastewater with high concentration of ammonia that negatively influences the environment and public health. Mass transfer is the key principle that assists this method, according to which, leachate is allowed to contact with air to strip the ammonia gas present in it. Various parameters such as temperature, pH, air to water ratio, concentration of ammonia in the water etc., have impacts on treatment efficacy (Ferraz FM et al. 2013). This method could be combined with principles like cathodic adsorption, sticking probability and absorption for effective removal of ammonia from effluent and thus making it as hybrid technology.
The working mechanism employs a sieve tray air ammonia stripper is employed in which a layer of stainless steel that serves as an attracting plane for the fouling deposits generated. Since stainless steel is cost-effective and has anti-corrosive properties for prolonged exposure time, it is considered as suitable plane for scale deposition. A small beam aperture is incorporated into the stripper via which supersonic molecular beam is collimated directly to the steel surface that enhances the trapping/attracting feature of the plane towards CaCO3 and thereby removing the fouling deposits. Absorption process is carried out to collect the ammonia gas from stripper and preventing their release into the atmosphere. On electrolysis, the heavy metals in the form of ions (Cr3+, Fe2+, Cd2+, etc.) gets migrated towards negative electrode (Stainless steel). Therefore, Steel surface plays a dual role as attracting plane and electrode and aids in removing ammonium, organic compounds and heavy metals from the leachate, hence converting it to potable water. This type of integrated method is suitable for agriculture industries.
Disputes and outlook
Wastewater effluent treatment involves challenges such as energy consumption, labour intensiveness, environmental impression and lower energy efficiency of decentralized treatment process. The recurrent attribute of all the advanced treatment technology is that they stimulate zero-discharge system, which is otherwise known as closed loop system that is delineated to recycle, filter and reuse the water, whose execution is highly nominated to attain sustainable and ecological wastewater treatment, that leads to the reduction of pathogens in surface and ground water to secure the public health. Membrane-based technologies are constructively employed for low-strength effluents which are not appropriate for treatment using anaerobic reactor due to low biogas potential, yet they offer certain drawbacks to overcome like high-energy demand due to fouling, low COD/sulfate ratios, inadequacy of alkalinity, etc. (Sharma A et al. 2020).
Critical analysis on future scope of the study
It is essential to practice standard, advanced and suitable treatment techniques for industrial wastewater, since it declares a remarkable threat to the health and environment. On that account, this review prospects the plan and design of wastewater treatment plants based on current and future exploration to overcome the issues related to effluent treatment and reuse potential of treated water. Rapidly developing cutting-edge technologies for wastewater treatment such as micro-coagulation, biosorption, microbial fuel cell systems, etc. serve as distinct medium of future substantial methods. In this review, integrated methods for wastewater treatment like phytosorption with adsorption, stripping with absorption; filtration and evaporation with photocatalytic adsorption, sedimentation with immobilization, nanotechnology with bioaugmentation, etc. have been discussed which are effective in capitalizing the inclusive advantages of the approach intricated with enhanced efficiency and reduced operational and maintenance costs. These hybrid treatment technologies through which reusable water is obtained are not limited only to the effluent treatment, however, also for the utilization of solid wastes and by-products from various industries, thus enhancing waste to wealth concept in industrial effluent treatment. While the calamity of potable water is of spreading challenge in the current century, reutilization of treated effluent is necessary for which analytical, hydrodynamic, computational and sophisticated simulation models like fluid dynamics, black-box model, 1-D layer model (clarifying model), Vitasovic’s layer model (thickening model), artificial intelligence, geographic information system, etc. and empirical/statistical models like double exponential model, Takács’ model (settling velocity function), IAWQ activated sludge model (kinetic based), etc. could be possibly used in future research for resolving the issue of water demand. Reclamation of resources such as heavy metals, minerals, water, dyes, fibers, organic matter, volatile compounds, oil, etc. from the wastewater effluent opens the door for novel business strategies and right set of circumstances and also reinforces the core of energy, environment, health and water. Hence, conjugation of techniques like decolorization with aerated biodegradation in addition to the above-mentioned integrations would seem to be a supreme field for future research in industrial effluent treatment.
Conclusion
It is perceptible that industrial wastewater effluent is obviously loaded with toxic heavy metals, dyes, organic compounds, etc. that are unable to be treated efficiently thereby constituting as a pollutant to the environment. Disposal of imperfectly treated effluents from the industries lead to the humiliation of ecosystem thus making the water inappropriate for daily requirements of life. Effluents released from industries such as textile, paper, pulp and oil, brewery, food and beverages etc., are convinced to provide a comprehensive profile of industrial wastewater and also the disposal problems. This paper is a review of course of actions that could be implemented in treatment process for the recovery and reuse of water; and also inspected the arising problems and technical possibilities to overcome the same related to treatment systems. Although there evolved various traditional and conventional treatment methods for purifying the industrial wastewater, implementation of integrated water reuse design promotes the use of retrieved wastewater that offers adequate workability to assure fidelity in water supply. The prevailing quality of this survey is based on current regulatory environment for wastewater management and recognized to assist the upcoming research attempts in this field. This paper looks over literary texts in a way that it focuses on techniques and their applicability in industries, efficiency, design parameters, and specificity of various industrial effluent treatment plants nevertheless does not include particulars concerning feasibility, experimental data analysis and degradation kinetic parameters/equations of the wastewater treatment design which can be concentrated in future studies.
Data availability
All the data mentioned are available from the authors upon reasonable request.
References
Adebayo GB, Kolawole OM, Ajijolakewu AK, Abdulrahaman SO (2010) Assessment and biological treatment of effluent from a pharmaceutical industry. Ann Biol Res 1(4):28–33
Agboola O, Babatunde DE, Fayomi OS, Sadiku ER, Popoola P, Moropeng L, Yahaya A, Mamudu OA (2020) A review on the impact of mining operation: monitoring assessment and management. Results Eng. https://doi.org/10.1016/j.rineng.2020.100181
Ahmad T, Aadil RM, Ahmed H, Rahman U, Soares BC, Souza SL (2019) Treatment and utilization of dairy industrial waste: A review. Trends Food Sci Technol 88:361–372. https://doi.org/10.1016/j.tifs.2019.04.003
Akpor OB, Ohiobor GO, Olaolu DT (2014) Heavy metal pollutants in wastewater effluents: sources, effects and remediation. Adv Biosci Bioeng 2(4):37–43. https://doi.org/10.11648/j.abb.20140204.11
Alimba CG, Adekoya KO, Soyinka OO (2019) Exposure to effluent from pharmaceutical industry induced cytogenotoxicity, hematological and histopathological alterations in Clarias gariepinus (Burchell, 1822). Excli Journal, 18, 63. https://www.ncbi.nlm.nih.gov/pubmed/30956640
Alvim CB, Bes-Piá MA, Mendoza-Roca JA (2020) Separation and identification of microplastics from primary and secondary effluents and activated sludge from wastewater treatment plants. Chem Eng J 402:126293. https://doi.org/10.1016/j.cej.2020.126293
Arezoo D, Mohammed U, Tzin K, Rita V, Nasser S, Pravin V, Ahmad M, Salmah I (2017) Microbial aspects in wastewater treatment—a technical review. Environ Technol 2(1):75–84. https://doi.org/10.22606/epp.2017.22005
Ashrafi O, Yerushalmi L, Haghighat F (2015) Wastewater treatment in the pulp-and-paper industry: a review of treatment processes and the associated greenhouse gas emission. J Environ Manag 158:146–157. https://doi.org/10.1016/j.jenvman.2015.05.010
Avunduk ZB, Kazan H (2019) New trends and industrial changes in production technology. Berikan Yayınevi, Ankara, pp 453–465
Awaleh MO, Soubaneh YD (2014) Waste water treatment in chemical industries: the concept and current technologies. Hydrol Curr Res 5(1):1. https://doi.org/10.4172/2157-7587.1000164
Azizi E, Fazlzadeh M, Ghayebzadeh M, Hemati L, Beikmohammadi M, Ghaffari HR, Zakeri HR, Sharafi K (2017) Application of advanced oxidation process (H2O2/UV) for removal of organic materials from pharmaceutical industry effluent. Environ Protect Eng. https://doi.org/10.5277/epe170115
Azuma T, Hayashi T (2021) On-site chlorination responsible for effective disinfection of wastewater from hospital. Sci Total Environ 776:145951. https://doi.org/10.1016/j.scitotenv.2021.145951
Barakat MA (2011) New trends in removing heavy metals from industrial wastewater. Arab J Chem 4(4):361–377. https://doi.org/10.1016/j.arabjc.2010.07.019
C. L. Beh, Abdullah Luqman Chuah, Mohsen Nourouzi, Thomas S. Y. Choong (2014) “Removal of Heavy Metals from Steel Making Waste Water”, E-Journal of Chemistry, 9(4)pp2557–2564. doi: https://doi.org/10.1155/2012/128275
Bhandari VM, Sorokhaibam LG, Ranade VV (2016) Industrial wastewater treatment for fertilizer industry—a case study. Desalin Water Treat 57(57):27934–27944. https://doi.org/10.1080/19443994.2016.1186399
Biswas T, Chowdhury M (2013) Treatment of leather industrial effluents by filteration and coagulation processes. Water Resour Indus 3(1):11–22. https://doi.org/10.1016/j.wri.2013.05.002
Bora T, Dutta J (2014) “Applications of nanotechnology in wastewater treatment—a review. J Nanosci Nanotechnol 14(1):613–626. https://doi.org/10.14256/JCE.2165.2017
Branca TA, Colla V, Algermissen D, Granbom H, Martini U, Morillon A, Pietruck R, Rosendahl S (2020) Reuse and recycling of by-products in the steel sector: recent achievements paving the way to circular economy and industrial symbiosis in Europe. Metals 10(3):345. https://doi.org/10.3390/met10030345
Brião VB, Salla ACV, Miorando T, Hemkemeier M, Favaretto DPC (2019) Water recovery from dairy rinse water by reverse osmosis: Giving value to water and milk solids. Resour Conserv Recycl 140:313–323. https://doi.org/10.1016/j.resconrec.2018.10.007
Brown AK, Wong CS (2018) Distribution and fate of pharmaceuticals and their metabolite conjugates in a municipal wastewater treatment plant. Water Res 144:774–783. https://doi.org/10.1016/j.watres.2018.08.034
Buczyńska A, Rolecki R, Tarkowski S (1999) “Industrial wastes and health hazards” Odpady przemysłowe i zagrożenia zdrowotne. Med Pr 50(2):179–190. https://doi.org/10.1078/1438-4639-00129
Cabrera MN (2016) Pulp mill wastewater: characteristic and techniques. IntechOpen. https://doi.org/10.5572/67537
Cadet J-F (2016) Paper mill wastewater treatment—model design and validation on pilot plant. IFAC Proc Vol 40(4):387–392. https://doi.org/10.3182/20070604-3-MX-2914.00066
Caldwell DJ, Mertens B, Kappler K, Senac T, Journel R, Wilson P, Meyerhoff RD, Parke NJ, Mastrocco F, Mattson B, Murray-Smith R (2016) A risk-based approach to managing active pharmaceutical ingredients in manufacturing effluent. Environ Toxicol Chem 35(4):813–822. https://doi.org/10.1002/etc.3163
Cañadas R, González-Miquel M, González EJ, Díaz I, Rodríguez M (2020) Overview of neoteric solvents as extractants in food industry: a focus on phenolic compounds separation from liquid streams. Food Res Int. https://doi.org/10.1016/j.foodres.2020.109558
Cano QA, Barrera-Díaz C, Roa-Morales G, Balderas Hernandez P, Romero R, Natividad R (2011) Wastewater ozonation catalyzed by iron. Ind Eng Chem Res 50(5):2488–2494. https://doi.org/10.1080/09593330.2013.868501
Chang H, Liu B, Crittenden JC, Vidic RD (2019) Resource recovery and reuse for hydraulic fracturing wastewater in unconventional shale gas and oil extraction. Environ Sci Technol 23:13547–13548. https://doi.org/10.1021/acs.est.9b06240
Chanthapon N, Praipipat P, Sarkar S, Padungthon S (2017) Synthesis, characterization and performance validation of hybrid cation exchanger containing hydrated ferric oxide nanoparticles (HCIX-Fe) for lead removal from battery manufacturing wastewater. Key Eng Mater. https://doi.org/10.4028/www.scientific.net/KEM.718.67
Chen D, Cheng Y, Zhou N, Chen P, Wang Y, Li K, Huo S, Cheng P, Peng P, Zhang R, Wang L (2020) Photocatalytic degradation of organic pollutants using TiO2-based photocatalysts: a review. J Clean Prod 268:121725. https://doi.org/10.1016/j.jclepro.2020.121725
China CR, Maguta MM, Nyandoro SS, Hilonga A, Kanth SV, Njau KN (2020) Alternative tanning technologies and their suitability in curbing environmental pollution from the leather industry: a comprehensive review. Chemosphere. https://doi.org/10.1016/j.chemosphere.2020.126804
Christina M (2020) Brazil, Russia, India, and China (BRIC). Economics, Investopedia, p 1
Chu BT, Petrovich ML, Chaudhary A, Wright D, Murphy B, Wells G, Poretsky R (2018) Metagenomics reveals the impact of wastewater treatment plants on the dispersal of microorganisms and genes in aquatic sediments. Appl Environ Microbiol. https://doi.org/10.1128/AEM.02168-17
Correia TS, Judd S (2015) Characterisation of textile wastewater- a review. Environ Technol 15(10):917–929. https://doi.org/10.1080/09593339409385500
Das P (2018) Strategies for decolorization and detoxification of Iron and Steel industry effluent. Rev Environ Contam Toxicol 212:113–136. https://doi.org/10.1007/978-1-4419-8453-1_4
Das P, Mondal GC, Singh S, Singh AK, Prasad B, Singh KK (2018) Effluent treatment technologies in the iron and steel industry-a state of the art review: Das et al. Water Environ Res 90(5):395–408. https://doi.org/10.2175/106143017X15131012152951
De La Luz-Pedro A, Martínez Prior EF, Lopez-Araiza MH, Jaime-Ferrer S, Estrada-Monje A, Bañuelos JA (2019) Pollutant removal from wastewater at different stages of the tanning process by electrocoagulation. J Chem. https://doi.org/10.1155/2019/8162931
Desai PA, Kore VS (2011) Performance evaluation of effluent treatment plant for textile industry in Kolhapur of Maharashtra. Univers J Environ Res Technol 1(4):560–565
Devi PD, Narayan S, Aruna KD (2021) Infectious disease, human capital, and the BRICS economy in the time of COVID-19. Methods X 8:101202
Dong S, Li J, Kim MH, Park SJ, Eden JG, Guest JS, Nguyen TH (2017) Human health trade-offs in the disinfection of wastewater for landscape irrigation: microplasma ozonation vs. chlorination. Environ Sci: Water Res Technol 3(1):106–118. https://doi.org/10.1039/C6EW00235H
Dutournié P, Jeguirim M, Khiari B, Goddard ML, Jellali S (2019) “Olive mill wastewater: from a pollutant to green fuels, agricultural water source, and bio-fertilizer”, part 2: water recovery. Water 11(4):768. https://doi.org/10.3390/w11040768
Efremenkov VM (2014) Liquid effluents released in nuclear Industry. Int J Renew Energy Technol Res 3(7):1–10. https://doi.org/10.1007/s10582-003-0075-y
El Khalfaouy R, Elabed A, Khallouk K, El Knidri H, Belaabed R, Addaou A, Laajeb A, Lahsini A (2017) Microfiltration process for tannery wastewater treatment from a leather industry in Fez-Morocco area. J Mat Environ Sci 8:2276–2281
Elakkiya E, Niju S (2020) Application of microbial fuel cells for treatment of paper and pulp industry wastewater: opportunities and challenges. Environ Biotechnol 2:125–149. https://doi.org/10.1007/978-3-030-38196-7_6
Elliot A, Khodaparast Z, Kamali M (2017) Wastewater treatment and reclamation: a review of pulp and paper industry. BioResource 11(3):7953–8091. https://doi.org/10.1016/j.wri.2019.100109
El-Shafai SA, Nasr FA, Doma HS, Abdel-Halim HS (2013) Chemical industry wastewater treatment. Environmentalist 27(2):275–286. https://doi.org/10.1007/s10669-007-9004-0
Enescu D, Cerqueira MA, Fucinos P, Pastrana LM (2019) Recent advances and challenges on applications of nanotechnology in food packaging. A literature review. Food Chem Toxicol 134:110814
Eng CY, Yan D, Withanage N, Liang Q, Zhou Y (2019) Wastewater treatment and recycle from a semiconductor industry: a demo-plant study. Water Pract Technol 14(2):371–379. https://doi.org/10.2166/wpt.2019.020
Etim MA, Babaremu K, Lazarus J, Omole D (2021) Health risk and environmental assessment of cement production in nigeria. Atmosphere 12(9):1111
Ferraz FM, Povinelli J, Vieira EM (2013) Ammonia removal from landfill leachate by air stripping and absorption. Environ Technol 34(15):2317–2326
Forster CF, Thompson G (2009) The treatment of pulp and paper mill effluent. Biores Technol 77(3):275–286. https://doi.org/10.1016/S0960-8524(00)00060-2
Gadipelly C, Pérez-González A, Yadav GD, Ortiz I, Ibáñez R, Rathod VK, Marathe KV (2014) Pharmaceutical industry wastewater: review of the technologies for water treatment and reuse. Ind Eng Chem Res 53(29):11571–11592. https://doi.org/10.1021/ie501210j
Garole DJ, Choudhary BC, Paul D, Borse AU (2018) Sorption and recovery of platinum from simulated spent catalyst solution and refinery wastewater using chemically modified biomass as a novel sorbent. Environ Sci Pollut Res 25(11):10911–10925. https://doi.org/10.1007/s11356-018-1351-5
Gatsios E, Hahladakis JN, Gidarakos E (2015) Optimization of electrocoagulation (EC) process for the purification of a real industrial wastewater from toxic metals. J Environ Manag 154:117–127. https://doi.org/10.1016/j.jenvman.2018.04.049
Gaur VK, Sharma P, Sirohi R, Awasthi MK, Dussap CG, Pandey A (2020) Assessing the impact of industrial waste on environment and mitigation strategies: A comprehensive review. J Hazard Mater 398:123019
Gautam A, Kansal A, Siddiqui NA (2016) Wastewater treatment of paper and pulp industry. Indian J Environ Health 53(2):203–218. https://doi.org/10.1039/C1JM14439A
Gunatilake SK (2015) Methods of removing heavy metals from industrial wastewater. Methods 1(1):14. https://doi.org/10.1007/s13201-020-01286-0
Guo Y, Wang J, Shinde S, Wang X, Li Y, Dai Y, Ren J, Zhang P, Liu X (2020) Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts. RSC Adv 10(43):25874–25887. https://doi.org/10.1039/D0RA05234E
Harris JT, Chockla AM, Akhavan VA, Bogart TD, Holmberg VC, Steinhagen C, Mullins CB, Stevenson KJ, Korgel BA (2011) Silicon nanowire fabric as a lithium ion battery electrode material. J Am Chem Soc 133(51):20914–20921. https://doi.org/10.1021/ja208232h
Hernández K, Muro C, Ortega RE, Velazquez S, Riera F (2021) Water recovery by treatment of food industry wastewater using membrane processes. Environ Technol 42(5):775–788. https://doi.org/10.1080/09593330.2019.1645739
Hoiberg B, Shah MT (2021) CFD study of multiphase flow in aerated grit tank. J Water Process Eng 39:101698. https://doi.org/10.4236/oalib.1106141
Holkar CR, Jadhav AJ, Pinjari DV, Mahamuni NM, Pandit AB (2016) A critical review on textile wastewater treatments: possible approaches. J Environ Manag 18(2):351–366. https://doi.org/10.6035/UJI.FACSA.2017.1
Hubbe MA, Metts D, Blanco ZK (2016) Wastewater treatment and reclamination: a review. BioResource 11(3):7953–8091. https://doi.org/10.2175/106143010X12851009156321
Hussain MI, Muscolo A, Farooq M, Ahmad W (2019) Sustainable use and management of non-conventional water resources for rehabilitation of marginal lands in arid and semiarid environments. Agric Water Manag 221:462–476. https://doi.org/10.1016/j.agwat.2019.04.014
Igoud S, Zeriri D, Aoudjit L, Boutra B, Sebti A, Khene F, Mameche A (2021) Climate change adaptation by solar wastewater treatment (SOWAT) for reuse in agriculture and industry. Irrig Drain 70(2):243–253. https://doi.org/10.1002/ird.2540
Jouhara H, Bertrand D, Axcell B, Montorsi L, Venturelli M, Almahmoud S, Milani M, Ahmad L, Chauhan A (2021) Investigation on a full-scale heat pipe heat exchanger in the ceramics industry for waste heat recovery. Energy. https://doi.org/10.1016/j.energy.2021.120037
Jun KC, Raman AAA, Buthiyappan A (2020) Treatment of oil refinery effluent using bio-adsorbent developed from activated palm kernel shell and zeolite. RSC Adv 10(40): 24079–24094. http://xlink.rsc.org/?DOI=d0ra03307c
Kale RD, Kane PB (2018) Colour removal using nanoparticles. Text Cloth Sustain. https://doi.org/10.1186/s40689-016-0015-4
Kamdi MS, Bhalme S, Mude V (2013) Performance evaluation of effluent treatment plant for thermal power plant. Int J of Eng Res App 3(5):425–429
Kane P, More S, Barwar S (2016) Synthesis of nanometals. Int J Green Herbal Chem 7(1):143–152. https://doi.org/10.24214/IJGHC/GC/7/1/14352
Kavitha RV, Murthy VK, Makam R, Asith KA (2012) Physico-chemical analysis of effluents from pharmaceutical industry and its efficiency study. Int J Environ Resid Appl 2(2):103–110
Khandegar V, Saroha AK (2013) Electrocoagulation for the treatment of textile industry effluent–a review. J Environ Manag 128:949–963. https://doi.org/10.1016/j.jenvman.2013.06.043
Kolhe AS, Ingale SR, Bhole RV (2009) Effluent of dairy technology. Shodh Samiksha Aur Mulyankan (int Res J) 2:459–461
Kumar PS, Narayan AS, Dutta A (2017) Nanochemicals and effluent treatment in textile industries. Text Cloth Sustain. https://doi.org/10.1007/978-981-10-2188-6_2
Kumar R, Sarmah AK, Padhye LP (2019) Fate of pharmaceuticals and personal care products in a wastewater treatment plant with parallel secondary wastewater treatment train. J Environ Manag 233:649–659. https://doi.org/10.1016/j.jenvman.2018.12.062
Kuyucak N (2008) Mining, the environment and the treatment of mine effluents. Int J Environ Pollut 10(2):315–325. https://doi.org/10.1504/IJEP.1998.005151
Kuyukina MS, Krivoruchko AV, Ivshina IB (2020) Advanced bioreactor treatments of hydrocarbon-containing wastewater. Appl Sci 10(3):831. https://doi.org/10.3390/app10030831
Laghrib F, Bakasse M, Lahrich S, El Mhammedi MA (2021) Advanced oxidation processes: photo-electro-Fenton remediation process for wastewater contaminated by organic azo dyes. Int J Environ Anal Chem 101(15):2947–2962. https://doi.org/10.1080/03067319.2020.1711892
Lakherwal D (2014) Adsorption of heavy metals: a review. Int J Environ Res Dev 4(1):41–48. https://doi.org/10.1155/2018/2568038
Lalwani J, Gupta A, Thatikonda S, Subrahmanyam C (2020) An industrial insight on treatment strategies of the pharmaceutical industry effluent with varying qualitative characteristics. J Environ Chem Eng 8(5):104190. https://doi.org/10.1021/ie501210j
Ledakowicz S, Żyłła R, Paździor K, Wrębiak J, Sójka-Ledakowicz J (2017) Integration of ozonation and biological treatment of industrial wastewater from dyehouse. Ozone Sci Eng 39(5):357–365. https://doi.org/10.1016/j.cej.2018.10.093
Levy GJ, Fine P, Bar-Tal A (2011) Treated wastewater in agriculture. Blackwell Pub. https://doi.org/10.1002/9781444328561
Liang Q, Yamashita T, Koike K, Matsuura N, Honda R, Hara-Yamamura H, Yokoyama H, Yamamoto-Ikemoto R (2020) A bioelectrochemical-system-based trickling filter reactor for wastewater treatment. Biores Technol. https://doi.org/10.1016/j.biortech.2020.123798
Liu M, Zhang X, Ma Y, Yan J (2018) Thermo-economic analyses on a new conceptual system of waste heat recovery integrated with an S-CO2 cycle for coal-fired power plants. Energy Convers Manag 161:243–253. https://doi.org/10.1016/j.enconman.2018.01.049
Mahalingam S, Ahn YH (2018) Improved visible light photocatalytic activity of rGO–Fe 3 O 4–NiO hybrid nanocomposites synthesized by in situ facile method for industrial wastewater treatment applications. New J Chem 42(6):4372–4383. https://doi.org/10.1021/acsomega.9b03923
McKinnon BT, Avis KE (2018) Membrane filtration of pharmaceutical solutions. Am J Hosp Pharm 50(9):1921–1936
Meerbergen K, Willems KA, Dewil R, Van Impe J, Appels L, Lievens B (2018) Isolation and screening of bacterial isolates from wastewater treatment plants to decolorize azo dyes. J Biosci Bioeng 125(4):448–456. https://doi.org/10.1016/j.jbiosc.2017.11.008
Meeroff DE, Shaha B, Bloetscher F, Esiobu N, Mercer B, McCorquordale D, Bennett M (2019) Characterization of biofilms and mineralogical scale in underground injection well disposal of landfill leachate and industrial wastewater streams. J Geosci Environ Protect 7(11): 69. http://www.scirp.org/journal/Paperabs.aspx?PaperID=96374
Mfune O, Kunda-Wamuwi CF, Chansa-Kabali T, Chisola M, Manchisi J (2018) Post mining recovery and rural-urban linkages: lessons from Zambia’s oldest mining town. Rural-Urban Linkages and Sustainable Development, Africa, p 179
Mirunalini V, Mushahary J (2017) Waste management in leather industry. Int J Civil Eng Technol 8(4):1394–1401
Mishra A, Bajpai M (2011) Flocculation behavior of textile effluents. J Hazard Mater 118(3):214–217. https://doi.org/10.1016/j.jhazmat.2004.11.003
Mohammadi L, Rahdar A, Bazrafshan E, Dahmardeh H, Susan M, Hasan AB, Kyzas GZ (2020) Petroleum hydrocarbon removal from wastewaters: a review. Processes 8(4):447. https://doi.org/10.3390/pr8040447
Mohsenpour SF, Hennige S, Willoughby N, Adeloye A, Gutierrez T (2020) Integrating micro-algae into wastewater treatment: a review. Sci Total Environ. https://doi.org/10.1016/j.scitotenv.2020.142168
Mossali E, Picone N, Gentilini L, Rodrìguez O, Pérez JM, Colledani M (2020) Lithium-ion batteries towards circular economy: a literature review of opportunities and issues of recycling treatments. J Environ Manag 264:110500. https://doi.org/10.1016/j.jenvman.2020.110500
Nasr FA, Doma HS, Abdel-Halim HS, El-Shafai SA (2007) Chemical industry wastewater treatment. Environmentalist 27(2):275–286
Nikolova M, Slavchov R, Nikolova G (2020) Nanotechnology in medicine. Drug Discov Eval Method Clin Pharmacol. https://doi.org/10.1007/978-3-319-56637-5_45-1
Noukeu NA, Priso RJ (2016) Effluent treatment in food industry. Water Resour Indus 16(1):1–18. https://doi.org/10.1016/j.wri.2016.07.001
Nur-E-Alam M, Mia MAS, Ahmad F, Rahman MM (2020) An overview of chromium removal techniques from tannery effluent. Appl Water Sci 10(9):1–22. https://doi.org/10.1007/s13201-020-01286-0
Nzila A, Razzak SA, Zhu J (2016) Bioaugmentation: an emerging strategy of industrial wastewater treatment for reuse and discharge. Int J Environ Res Public Health 13(9):846. https://doi.org/10.3390/ijerph13090846
Ohto H, Yasumura S, Maeda M, Kainuma H, Fujimori K, Nollet KE (2017) From devastation to recovery and revival in the aftermath of Fukushima’s nuclear power plants accident. Asia Pacific J Public Health. https://doi.org/10.1177/1010539516675700
Oron G, DeMalach Y, Hoffman Z, Manor Y (2012) Effect of effluent quality and application method on agricultural productivity and environmental control. Water Sci Technol 26:7–1601. https://doi.org/10.2166/wst.1992.0603
Palmieri V, De Maio F, De Spirito M, Papi M (2021) Face masks and nanotechnology: keep the blue side up. Nano Today 37:101077
Pandey AK, Mishra BK, Arora A, Singh S, Ray RC (2017) Bioaugmentation and biovalourization of agro-food and beverage industry effluents. Bioaugment Biostimul Biocontrol. https://doi.org/10.1007/978-3-642-19769-7_5
Pathak U, Das P, Banerjee P, Datta S (2016) Treatment of wastewater from a dairy industry using rice husk as adsorbent: treatment efficiency, isotherm, thermodynamics, and kinetics modelling. J Thermodyn. https://doi.org/10.1155/2016/3746316
Pedersen H, Elliott SD (2014) Studying chemical vapor deposition processes with theoretical chemistry. Theor Chem Acc. https://doi.org/10.1007/s00214-014-1476-7
Radulescu IG, Panait M, Voica C (2021) BRICS countries challenge to the world economy new trends. Proced Econ Fin 8:605–613
Raghunath BV, Punnagaiarasi A, Rajarajan G, Irshad A, Elango A (2016) Impact of dairy effluent on environment—a review. Integr Waste Manag India. https://doi.org/10.1007/978-3-319-27228-3_22
Rahangdale RV, Kore SV, Kore VS (2012) Waste management in lead-acid battery industry: a case study. World J Appl Environ Chem 1:7–12
Rajkumar K, Muthukumar M, Sivakumar R (2010) Novel approach for the treatment and recycle of wastewater from soya edible oil refinery industry—an economic perspective. Resour Conserv Recycl 54(10):52–758. https://doi.org/10.26872/jmes.2018.9.1.3
Raju S, Carbery M, Kuttykattil A, Senthirajah K, Lundmark A, Rogers Z, Suresh SC, Evans G, Palanisami T (2020) Improved methodology to determine the fate and transport of microplastics in a secondary wastewater treatment plant. Water Res. https://doi.org/10.1016/j.watres.2020.115549
Ram C, Rani P, Gebru KA, Abrha MGM (2020) Pulp and paper industry wastewater treatment: use of microbes and their enzymes. Phys Sci Rev. https://doi.org/10.1515/psr-2019-0050
Ruiz J, Álvarez P, Arbib Z, Garrido C, Barragán J, Perales JA (2011) Effect of nitrogen and phosphorus concentration on their removal kinetic in treated urban wastewater by chlorella vulgaris. Int J Phytorem 13(9):884–896. https://doi.org/10.1080/15226514.2011.573823
Saha PD, Baskaran D, Malakar S, Rajamanickam R (2015) Comparative study of biofiltration process for treatment of VOCs emission from petroleum refinery wastewater-a review. Environ Technol Innov 8:441–461. https://doi.org/10.1016/j.eti.2017.09.007
Salzman RS (2021) Russia, BRICS, and the disruption of global order. Georgetown University Press, Georgetown
Santos PG, Scherer CM, Fisch AG, Rodrigues MAS (2020) Petrochemical wastewater treatment: Water recovery using membrane distillation. J Clean Prod 267:121985. https://doi.org/10.1016/j.jclepro.2020.121985
Savelski MJ, Slater CS, Tozzi PV, Wisniewski CM (2017) On the simulation, economic analysis, and life cycle assessment of batch-mode organic solvent recovery alternatives for the pharmaceutical industry. Clean Technol Environ Policy 19(10):2467–2477. https://doi.org/10.1007/s10098-017-1444-8
Sepehri A, Sarrafzadeh MH, Avateffazeli M (2020) Interaction between Chlorella vulgaris and nitrifying-enriched activated sludge in the treatment of wastewater with low C/N ratio. J Clean Prod 247:119164. https://doi.org/10.1016/j.jclepro.2019.119164
Sharma A, Schweizer V, Hipel KW (2020) Analyzing cauvery river dispute using a system of systems approach. In 2020 IEEE International Conference on Systems, Man, and Cybernetics (SMC) (pp 3969–3975). doi: https://doi.org/10.1109/SMC42975.2020.9283393
Shete BS, Shinkar NP (2013) Dairy industry wastewater sources, characteristics & its effects on environment. Int J Curr Eng Technol 3(5):611–1615. https://doi.org/10.1177/0144598717698081
Silva B, Rocha V, Lago A, Costa F, Tavares T (2021) Rehabilitation of a complex industrial wastewater containing heavy metals and organic solvents using low cost permeable bio-barriers–from lab-scale to pilot-scale. Sep Purif Technol 263:118381. https://doi.org/10.1016/j.seppur.2021.118381
Singh D (2017) Treatment of paper and pulp industry wastewater. Int J Sci Eng Res 8(12):48–52
Sinha SK, Sinha VK, Pandey SK, Tiwari A (2014) A study on the waste water treatment technology for steel industry: recycle and reuse. Am J Eng Res 3(4):309–315
Sinha S, Srivastava A, Mehrotra T, Singh R (2019) A review on the dairy industry waste water characteristics, its impact on environment and treatment possibilities. Emerg Issues Ecol Environ Sci. https://doi.org/10.1007/978-3-319-99398-0_6
Srikanth (2015) Wastewater effluent analysis for electric power plants. Water Sci Technol 62(10):2256–2262. https://doi.org/10.1186/s40643-017-0163-7
Stram DO (2015) Airborne effluents released from nuclear power plants. Analysis of cancer risks in populations near nuclear facilities. Health Phys. https://doi.org/10.1097/HP.0000000000000068
Sudarshan K, Murugan A, Petchimuthu K (2017) Reuse of paper and pulp industry wastewater. Appl Water Sci 7(6):3317–3322. https://doi.org/10.1007/s13201-016-0477-1
Svetlana G (2019) Role of China in the development of trade and FDI cooperation with BRICS countries. China Econ Rev 57:101271
Syam BD, Anantha Singh TS, Nidheesh PV, Suresh Kumar M (2020) Industrial wastewater treatment by electrocoagulation process. Sep Sci Technol 55(17):3195–3227. https://doi.org/10.3390/w12123426
Thamaraiselvan C, Michael N, Oren Y (2018) Selective separation of dyes and brine recovery from textile wastewater by nanofiltration membranes. Chem Eng Technol 41(2):185–293. https://doi.org/10.1002/ceat.201700373
Threrujirapapong T, Khanitchaidecha W, Nakaruk A (2017) Treatment of high organic carbon industrial wastewater using photocatalysis process. Environ Nanotechnol Monit Manag 8:163–168. https://doi.org/10.1016/j.ijleo.2018.08.061
Tiffon C (2018) The impact of nutrition and environmental epigenetics on human health and disease. Int J Mol Sci 19(11):3425
Tikariha A, Sahu O (2014) Study of characteristics and treatments of dairy industry waste water. J Appl Environ Microbiol 2(1):16–22. https://doi.org/10.12691/jaem-2-1-4
Upadhyay K, Srivastava JK (2017) Application of ozone in the treatment of indstrial and municipal wastewater. J Cont Pollut 21(1):235
Upadhyaya S, Kynčlová P (2017) Big Data-Its relevance and impact on industrial statistics. Scope Use Big Data Indus Stat 1:20–29. https://doi.org/10.13140/RG.2.2.31044.94083
Van Tran V, Park D, Lee YC (2018) Hydrogel applications for adsorption of contaminants in water and wastewater treatment. Environ Sci Pollut Res 25(25):24569–24599. https://doi.org/10.1007/s11356-018-2605-y
Wang LP, Chen YJ (2019) Sequential precipitation of iron, copper, and zinc from wastewater for metal recovery. J Environ Eng 145(1):04018130. https://doi.org/10.1061/(ASCE)EE.1943-7870.0001480
Wang S, Xiao K, Huang X (2019) Characterizing the roles of organic and inorganic foulants in RO membrane fouling development: the case of coal chemical wastewater treatment. Sep Purif Technol 210:1008–1016. https://doi.org/10.1016/j.scitotenv.2018.02.057
Xu M, Zhang Y, Li Y, Lv M, Zhu S, Qian T, Fan B (2021) Energy recovery potential in coupling of sanitation and agriculture: techno-economic analysis on resource-oriented sanitation. Waste Manag 126:141–151. https://doi.org/10.1016/j.wasman.2021.03.003
Ye QZ (2016) Safety and effective developing nuclear power to realize green and low-carbon development. Adv Clim Chang Res 7(1–2):10–16. https://doi.org/10.1016/j.accre.2016.06.005
Zhang T, Bowers KE, Harrison JH, Chen S (2018) Releasing phosphorus from calcium for struvite fertilizer production from anaerobically digested dairy effluent. Water Environ Res 82(1):34–42. https://doi.org/10.2175/106143009x425924
Zhang H, Feng J, Chen S, Zhao Z, Li B, Wang Y, Jia J, Li S, Wang Y, Yan M, Lu K (2019) Geographical patterns of nirS gene abundance and nirS-type denitrifying bacterial community associated with activated sludge from different wastewater treatment plants. Microb Ecol 77(2):304–316. https://doi.org/10.1007/s00248-018-1236-7
Zhuang LL, Yang T, Zhang J, Li X (2019) The configuration, purification effect and mechanism of intensified constructed wetland for wastewater treatment from the aspect of nitrogen removal: a review. Biores Technol 293:122086. https://doi.org/10.1016/j.biortech.2019.122086
Acknowledgements
The authors thank the institute authorities for supporting us.
Funding
No funding is required for conducting this study.
Author information
Authors and Affiliations
Contributions
Idea for the article: KS; critical revision of work: KN; literature search: CGM; data analysis: SR, PRL.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no conflicts of interest to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sathya, K., Nagarajan, K., Carlin Geor Malar, G. et al. A comprehensive review on comparison among effluent treatment methods and modern methods of treatment of industrial wastewater effluent from different sources. Appl Water Sci 12, 70 (2022). https://doi.org/10.1007/s13201-022-01594-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13201-022-01594-7