Skip to main content
SpringerLink
Log in

Rice husk reinforced polypropylene composites: mechanical, morphological and thermal properties

  • Original Article
  • Published:
Journal of the Indian Academy of Wood Science Aims and scope Submit manuscript

Abstract

Rice husk–Polypropylene (RH–PP) composites were prepared using four level of filler loadings (10, 20, 40 and 50%) incorporating maleic anhydride grafted Polypropylene (MAPP) and m-isopropenyl α–α-dimethylbenzyl-isocyanate grafted Polypropylene (m-TMI-g-PP) coupling agents. Mechanical properties of the composites indicated that m-TMI-g-PP coupling agent performed better than that of MAPP. Tensile and flexural properties of composites prepared with coupling agents were found to be superior to controlled samples. However, Impact strength of the composites decreased with increasing filler loadings in all the composites. Fourier transform infra red (FTIR) spectroscopy of the composites revealed effective coupling between rice husk and polypropylene. Scanning electron microscopy indicated improved adhesion between rice husk and Polypropylene in case of coupled composites. Thermal stability of pure PP was higher than that of rice husk and RH–PP composites. Use of coupling agent had no significant effect on thermal stability of the composites.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  • Aggarwal PK, Raghu N, Karmarkar A, Chauhan S (2013) Jute polypropylene composites using m-TMI-grafted-polypropylene as a coupling agent. Mater Des 43:112–117

    Article  CAS  Google Scholar 

  • Ashori A, Nourbakhsh A (2009) Mechanical behavior of Agro-residue-reinforced polypropylene composites. J Appl Polym Sci 111:2616–2620

    Article  CAS  Google Scholar 

  • ASTM D 790-92 (1995) Standard test method for Flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM, Philadelphia, PA

  • ASTM D 256-93 (1995) Standard test method for impact resistance of plastics and electrical insulating materials. ASTM, Philadelphia, PA

  • ASTM D638-94b (1995) Standard test method for tensile properties of plastics. ASTM, Philadelphia, PA

  • Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fibers. Prog Polym Sci 24(2):221–274

    Article  CAS  Google Scholar 

  • Dimzoski B, Bogoeva-Gaceva G, Gentile G, Avella M, Grozdanov A (2009) Polypropylene based Eco-composites filled with agricultural rice hulls waste. Chem BiochEM Eng Q 23(2):225–230

    CAS  Google Scholar 

  • Doan TTL, Gao SL, Mader E (2006) Jute/polypropylene composites I. Effect of matrix modification. Compos Sci Technol 66:952–963

    Article  CAS  Google Scholar 

  • Facca AG, Kortscht MT, Yan N (2006) Predicting the elastic modulus of natural fiber reinforced thermoplastics. Compos A 37(10):1660–1671

    Article  CAS  Google Scholar 

  • Felix JM, Gatenholm P (1991) The nature of adhesion in composites of modified cellulose fibers and polypropylene. J Appl Polym Sci 42:609–620

    Article  CAS  Google Scholar 

  • Garcia GE, Delgado SR, Vazquez RNA, Hernandez GE, Rosa RZE, Rodriguez SR (2012) Modification of rice husk to improve the interface in isotactic polypropylene composites. Lat Am Appl Res 42:83–87

    Google Scholar 

  • Grozdanove A, Buzarovska A, Bogorea GG, Avella M, Errico ME, Gentille G (2006) Rice straw as an alternative reinforcement in polypropylene composites. Agron Sustain Dev 26:251–255

    Article  CAS  Google Scholar 

  • Guo C, Lipping L, Wang Q (2012) Investigation on the compatibilizing effect of m-isopropenyl- α–α-dimethylbenzyl isocyanate grafted polypropylene on polypropylene and wood flour composites. Wood Sci Technol 46:257–270

    Article  CAS  Google Scholar 

  • Hwang C, Hse C, Shupe TF (2008) Effects of raw materials on the properties of wood fiber-polyethylene composites part 3: effect of a compatibilizer and wood adhesive on the interfacial adhesion of wood/plastic composites. For Prod J 58:66–72

    CAS  Google Scholar 

  • Iyer KA, Novel John MT (2013) Synergistic composites of polypropylene and rice husk ash: sustainable resource hybrids prepared by solid-state shear pulverization. Polym Compos 34:1211–1221

    Article  CAS  Google Scholar 

  • Jang J, Lee E (2001) Improvement of the flame retardancy of paper sludge/polypropylene composite. Polym Test 20:7–13

    Article  CAS  Google Scholar 

  • Karmakar AC, Youngquist JA (1996) Injection molding of polypropylene reinforced with short jute fibers. J Appl Polym Sci 62:1147–1151

    Article  Google Scholar 

  • Karmarkar A (2007) Wood fiber filled Polyofin. In: Ph.D. Thesis. IISc, Bangalore

  • Karmarkar A, Aggarwal P, Modak J, Chanda M (2003) Grafting of m-isopropenyl, α–α-dimethylbenzylisocyanate (m-TMI) onto isotactic polypropylene: synthesis and characterization. J Polym Mater 20:101–107

    CAS  Google Scholar 

  • Karmarkar A, Chauhan SS, Modak JM, Chanda M (2007) Mechanical properties of wood-fiber reinforced polypropylene composites: effect of a novel compatibilizer with isocyanate functional group. Compos A 38:227–233

    Article  CAS  Google Scholar 

  • Keener TJ, Stuart RK, Brown TK (2004) Maleated coupling agent for natural fiber composites. Compos A 35:357–362

    Article  CAS  Google Scholar 

  • Kim HS, Yang HS, Kim HJ, Park HJ (2004) Thermogravimetric analysis of rice husk flour filled thermoplastic polymer composites. J Therm Anal Calorim 76:395–404

    Article  CAS  Google Scholar 

  • Kim HS, Kim S, Kim HJ, Yang HS (2006) Thermal properties of bio-flour filled polyolefin composites with different compatibilizing agents, type and content. Thermochim Acta 451:181–188

    Article  CAS  Google Scholar 

  • Kuo PY, Wang SY, Chen JH, Hsueh HC, Tsai MJ (2009) Effects of material compositions on the mechanical properties of wood–plastic composites manufactured by injection molding. Mater Des 30(9):3489–3496

    Article  CAS  Google Scholar 

  • Mukhopadhyay S, Deopura BL, Alagiruswamy RJ (2003) Interface behavior in polypropylene composites. Thermoplast Compos Mater 16:479–495

    Article  CAS  Google Scholar 

  • Oksman K, Clemons G (1988) Mechanical properties and morphology of impact modified polypropylene –wood flour composites. J Appl Polym Sci 67:1503–1513

    Article  Google Scholar 

  • Prachayawarakon J, Yaemboonying P (2004) Mechanical and morphological properties of rice husk-filled polypropylene. Chiang Mai J of Sci 31(1):35–44

    Google Scholar 

  • Rahman R, Hasan M, Hoque MM, Islam MN (2010) Physico-mechanical properties of jute fiber reinforced polypropylene composites. J Reinf Plast Compos 29(3):445–455

    Article  CAS  Google Scholar 

  • Rana AK, Mandal A, Mitra BC, Jacobson R, Rowell R, Banerjee AN (1998) Short jute fiber-reinforced polypropylene composites: effect of compatibilizer. J Appl Polym Sci 6:329–338

    Article  Google Scholar 

  • Rosa SML, Santos EF, Ferriera CA, Neehtigall SMB (2009a) Studies on the properties of rice husk-filled composites-effect of maleated PP. Mater Res. ISSN 1980-5373

  • Rosa SML, Nachtigall SMB, Ferreira CA (2009b) b) Thermal and dynamic-mechanical characterization of rice-husk filled polypropylene composites. Macromol Res 17(1):8–13

    Article  CAS  Google Scholar 

  • Sain M, Panthapulakki S (2006) Bioprocess preparation of wheat straw fibers and their characterization. Ind Crops Prod 23(1):1–8

    Article  CAS  Google Scholar 

  • Sanadi, AR, Caulfield DF, Jacobson RE (1997) Paper and composites from agro-based resources. In: Agro-fiber thermoplastic composites. Lewis Publishers, CRC Press, Boca Raton, pp 139–146

  • Toro P, Quijada R, Murillo O, Yazadani PM (2005) Study of the morphology and mechanical properties of PP composites with silica or rice husk. Polym Int 54:730–734

    Article  CAS  Google Scholar 

  • Yang HS, Kim HJ, Park H-J, Lee BJ, Twang TS (2004) Rice husk flour filled polypropylene composites: mechanical and morphological study. Compos Struct 63:305–312

    Article  Google Scholar 

  • Yang HS, Kim HJ, Park H-J, Lee BJ, Twang TS (2007) Effect of compatibilizing agents on rice-husk flour reinforced polypropylene composites. Compos Struct 77(1):45–55

    Article  Google Scholar 

Download references

Acknowledgements

Authors are thankful to the Director and Group Coordinator (Research), Institute of Wood Science and Technology, Bengaluru for supporting the study. Thanks are also due to Mr. V. Krishna Technical Office and Mr. Anand Raj, Junior Research Fellow for their help. Financial support from Indian Council of Forestry Research and Education is highly acknowledged.

Author information

Authors and Affiliations

  1. Institute of Wood Science and Technology, Malleswaram, Bengaluru, 560 003, India

    N. Raghu, Shakti Chauhan & Pankaj K. Aggarwal

  2. Rani Lakshmi Bai Central Agricultural University, Jhansi, UP, 284003, India

    Amey Kale

Authors
  1. N. Raghu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Amey Kale
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Shakti Chauhan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Pankaj K. Aggarwal
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Pankaj K. Aggarwal.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Raghu, N., Kale, A., Chauhan, S. et al. Rice husk reinforced polypropylene composites: mechanical, morphological and thermal properties. J Indian Acad Wood Sci 15, 96–104 (2018). https://doi.org/10.1007/s13196-018-0212-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13196-018-0212-7

Keywords

Search

Navigation