Skip to main content
SpringerLink
Log in

Experimental study of the ultrasonic and mechanical properties of SRM under compressive loading

  • Original Article
  • Published:
Environmental Earth Sciences Aims and scope Submit manuscript

Abstract

Experiments were conducted to investigate the relationship between the ultrasonic pulse velocity (UPV), transmission ratio (TR), attenuation coefficient (AC) and mechanical properties of soil and rock mixture (SRM) with different rock percentage, under uniaxial compression. Cylindrical SRM specimens (50 mm diameter and 100 mm height) with rock block percentage of 20, 30, 40, and 50 % were produced to perform a series of Uniaxial Compressive Strength (UCS) test. The ultrasonic wave was transmitted and received by a P-wave piezoelectric transducer (130 kHz) and the ultrasonic travel time and amplitude were recorded by an ultrasonic detector during the whole deformation process of specimens. From the test results, the UPV decreased and AC increased with the increasing rock percentage for all specimens by ultrasonic inspection before UCS test. The failure mechanism of all specimens showed splitting-sliding mixed pattern, macro-cracks have a direction of 0–10° parallel or sub-parallel to normal stress, and UCS decreased with increasing of rock percentage. In addition, the UPV and TR have fluctuation growth trend with increasing of axial stress while the increment rate decreased gradually. The statistical correlations between UPV and TR and axial stress are presented and discussed. Moreover, the relationship between ultrasonic parameters and axial stress for soil and rock specimens were also discussed. These results confirm that the ultrasonic and mechanical properties of SRM are closely related to rock percentage. As a special geomaterial, the mechanical properties of SRM are different from rock and soil; this can be further confirmed by ultrasonic tests.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19

Similar content being viewed by others

References

  • Akkaya Y, Voigt T, Subramaniam KV (2003) Nondestructive measurement of concrete strength gain by an ultrasonic wave reflection method. Mater Struct 36(8):507–514

    Article  Google Scholar 

  • Bayram E, Tekin Y, Gokhan K (2014) Strength and ultrasonic properties of cemented paste backfill. Ultrasonics 54:195–204

    Article  Google Scholar 

  • British standard 1990 Methods of test for soils for civil engineering purposes—part 1: general requirements and sample preparation, BS1377-1

  • Chen CG, Yao LK, Wang Q (2003) Application of three dimensional discrete element method in studies of debris-flow deposit process. J Nat Dis 4:55–61 [in Chinese]

    Google Scholar 

  • Ding XL, Li YX, Wang X (2010) Particle flow modeling mechanical properties of soil and rock mixtures based on digital image. China J Rock Mech Eng 29(3):477–484 [in Chinese]

    Google Scholar 

  • Donaghe RT, Torrey VH (1994) Proposed new standard test method for laboratory compaction testing of soil-rock mixtures using standard effort. Geotech Test J 17(3):387–392

    Article  Google Scholar 

  • Farmer IW (1983) Engineering behavior of rocks, 2nd ed, Chapman and Hall, ISBN 0-412-13980-4

  • Grinzato E, Marinetti S, Bison PG (2004) Comparison of ultrasonic velocity and IR thermography for the characterization of stones. Infrared Phys Technol 46(1–2):63–68

    Article  Google Scholar 

  • Hartmut K (2001) Measuring and modeling of P- and S-wave velocities on crustal rocks: a key for the interpretation of seismic reflection and refraction data. Int J Geo 9:1–10

    Google Scholar 

  • Kahraman S (2002) Estimating the direct P-wave velocity value of intact rock from indirect laboratory measurements. Int J Rock Mech Min 39(1):101–104

    Article  Google Scholar 

  • Kem H, Tubia JM (1993) Pressure and temperature dependence of P-and S-wave velocities, seismic anisotropy of sheared rocks form the Sierra Alpujata massif (Ronda peridotites, southern Spain). Ear Planet Sci Lett 119(23):191–205

    Google Scholar 

  • Levine DM, Ramsey PP, Smidt RK (2011) Applied statistics for engineers and scientists, 1st edn. Prentice-Hall Publishing, New Jersey

    Google Scholar 

  • Li SH, Wang YN (2004) Stochastic model and numerical simulation of uniaxial loading test for rock and soil blending by 3D–DEM. China J Geotech Eng 36(2):173–177 [in Chinese]

    Google Scholar 

  • Lindquist (ES) 1994 The strength and deformation properties of melange. Ph.D. Thesis, Department of Civil Engineering, University of California. Berkeley

  • Lindquist ES, Goodman RE (1994) Strength and deformation properties of a physical model melange. In: Nelson PP, Laubach SE (eds) Proceedings of the 1st North American rock mechanics symposium (NARMS). Balkema, Rotterdam

    Google Scholar 

  • Medley E, Lindquist ES (1995) The engineering significance of the scale-independence of some Franciscan Melanges in California, USA. In: Daemen JK, Schultz RA (eds) Proceedings of the 35th US rock mechanics symposium. Balkema, Rotterdam, pp 907–914

    Google Scholar 

  • Meglis IL, Chow T, Martin CD, Young RP (2005) Assessing in situ microcrack damage using ultrasonic velocity tomography. Int J Rock Mech Min 42(1):25–34

    Article  Google Scholar 

  • Ministry of Water Resources of the People’s Republic of China, Standard for soil test method, GB/T 50123-1999

  • Mirmiram A, Wei Y (2001) Damage assessment of FRP-encased concrete using ultrasonic pulse velocity. J Eng Mech 127(2):126–135

    Article  Google Scholar 

  • Selleck SF, Landis EN, Peterson ML (1998) Ultrasonic investigation of concrete with distributed damage. ACI Mater J 95(1):27–36

    Google Scholar 

  • Springman SM, Jomm C, Teysseire P (2003) Instabilities on moraine slopes induced by loss of suction: a case history. Geotechnique 53(1):3–10

    Article  Google Scholar 

  • Su H, Hu J, Tong J, Wen Z (2012) Rate effect on mechanical properties of hydraulic concrete flexural-tensile specimens under low loading rates using acoustic emission technique. Ultrasonics 52(7):890–904

    Article  Google Scholar 

  • Vallejo LE, Mawby R (2000) Porosity influence on the shear strength of granular material-clay mixtures. Eng Geol 58:125–136

    Article  Google Scholar 

  • Vallejo LE, Zhou Y (1994) The mechanical properties of simulated soil–rock mixtures. In: Proceedings of the 13th international conference on soil mechanics and foundation engineering, New Delhi, India, 1994. pp 365–368

  • Wang Y, Li X (2014) Research on damage cracking for rock and soil aggregate using calculation meso-mechanics. China J Rock Mech Eng 33(2):4020–4031 [in Chinese]

    Google Scholar 

  • Wang Y, Zhao MH, Li SH, Wang JG (2005) Stochastic structural model of rock and soil aggregates by continuum-based discrete element method. Sci China Techol Sci 48(Supp 2):95–106

    Google Scholar 

  • Wang Y, Li X, Wu YF, Lin C (2014) Experimental study on meso-damage cracking characteristics of RSA by CT test. Environ Earth Sci. doi:10.1007/s12665-014-3808-2

    Google Scholar 

  • Winkler KW (1998) Seismie attenuation: effects of pore fluids and frietional sliding. Geophysies 47(l):1–15

    Google Scholar 

  • Xu WJ, Hu RL (2007) Some geomechanical properties of soil-rock mixtures in the Hutiao Gorge area. China Geotech 57(3):255–264

    Article  Google Scholar 

  • Xu WJ, Yue ZQ, Hu RL (2008) Study on the mesostructure and mesomechanical characteristics of the soil-rock mixture using digital image processing based finite element method. Int J Rock Mech Min 45:749–762

    Article  Google Scholar 

  • Xu WJ, Qiang X, Hu RL (2011) Study on the shear strength of soil–rock mixture by large scale direct shear test. Int J Rock Mech Min 45:1235–1247

    Google Scholar 

  • Yasar E, Erdogan Y (2004) Correlating sound velocity with density, compressive strength and Young modulus of carbonate rocks. Int J Rock Mech Min 41(5):871–875

    Article  Google Scholar 

  • You XH, Tang JS (2002) Research on horizontal push-shear in situ test of soil and rock-mixture. China J Rock Mech Eng 10:1537–1540

    Google Scholar 

  • Zhai XJ (2008) The experimental research of ultrasonic characteristics for rock under uniaxial load. Master diss.,Chengdu University of Technology, Chengdu [in Chinese]

  • Zhang X, Yang F, Yang J (2010) Experimental study on anisotropic strength properties of sandstone. Electron J Geotech Eng 15:1325–1335

    Google Scholar 

  • Zhao MJ, Wu DL (1999) Ultrasonic properties of rock under loading and unloading: Theoretical model and experimental research. China J Geotech Eng 21(5):541–545 [in Chinese]

    Google Scholar 

  • Zhu FC, Yang Y, Chen CM (2012) Experimental study on slope stability with soil mixed rocks under rainfall. Appl Mech Mater 173:506–510

    Article  Google Scholar 

Download references

Acknowledgments

The authors would like to thank the editors and the anonymous reviewers for their helpful and constructive comments. This work was supported by the National Natural Science Foundation of China (Grants Nos. 41227901, 41330643) and the Strategic Priority Research Program of the Chinese Academy of Sciences (Grants Nos. XDB10030000, XDB10030300, and XDB10050400).

Author information

Authors and Affiliations

  1. Key Laboratory of Shale Gas and Geoengineering, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing, 100029, China

    Y. Wang, X. Li, R. L. Hu & S. D. Li

  2. School of Hydraulic Engineering, Changsha University of Science and Technology, Changsha, 410114, Hunan, China

    J. Y. Wang

Authors
  1. Y. Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. X. Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. R. L. Hu
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. D. Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. J. Y. Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to X. Li.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wang, Y., Li, X., Hu, R.L. et al. Experimental study of the ultrasonic and mechanical properties of SRM under compressive loading. Environ Earth Sci 74, 5023–5037 (2015). https://doi.org/10.1007/s12665-015-4529-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12665-015-4529-x

Keywords

Search

Navigation