Abstract
Fiber reinforced composites (FRCs) are more and more widely applied in dentistry to substitute for metallic restorations: periodontal splints, fixed partial dentures, endodontic posts, orthodontic appliances, and some other indirect restorations. In general in FRCs, the fiber reinforcement provides the composite structure with better biomechanical performance due to their superior properties in tension and flexure. Nowadays, the E-glass fiber is most frequently used because of its chemical resistance and relatively low cost. Growing interest is being paid to enhance its clinical performance. Moreover, various techniques are utilized to reinforce the adhesion between the fiber and the matrix. Oral conditions set special requirements and challenges for the clinical applications of FRCs. The biomechanical properties of dental materials are of high importance in dentistry, and given this, there is on-going scientific interest to develop E-glass fiber reinforced composite systems. FRCs are generally biocompatible and their toxicity is not a concern.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mallick PK (2008) Fiber-reinforced composites: materials, manufacturing, and design, 3rd edn. CRC Press, Taylor & Francis Group, Boca Raton, FL
Bunsell AR, Renard J (2005) Fundamentals of fibre reinforced composite materials. Institute of Physics Publishing, Bristol
Rudo ND, Karbhari MV (1999) Dent Clin North Am 43:7
Goldberg JA, Freilich AM, Haser AK, Audi HJ (1998) J Dent Res 77:226
Soares CAM, Soares CMM, Freitas MJM (1999) Mechanics of composite materials and structures. Springer, New York, NY
Li L, Li X, Zhen W (2006) English for materials science and engineering. Harbin Engineering University Press, Harbin
Vallittu PK (2009) In: Matinlinna JP, Mittal KL (eds) Adhesion aspects in dentistry, BRILL/VSP, Leiden, The Netherlands, pp 63–74
Darvell BW (2006) Materials science for dentistry, 8th edn. B. W. Darvell, Pokfulam
Darvell BW (2006) A glossary of terms for dental materials science, 9th edn. B. W. Darvell, Pokfulam
Chawla KK (2001) In: Buschow KHJ, Cahn RW, Flemings MC, Ilschner B, Kramer EJ, Mahajan S, Veyssière P (eds) Encyclopedia of materials: science and technology, Pergamon, Oxford, UK, pp 3160–3167
Wiley J (1988) The fiberglass repair and construction handbook, 2nd edn. McGraw-Hill Professional, New York
Matinlinna JP, Lassila LVJ, Özcan M, Yli-Urpo A, Vallittu PK (2004) Int J Prosthodont 17:155
Matinlinna JP, Vallittu PK (2007) J Oral Rehabil 34:622
Matinlinna JP, Vallittu PK (2007) J Cont Dent Pract 8:1
Zhang M, Matinlinna JP (2011) J Adhes Sci Techn. doi:10.1163/016942411x556051
Vallittu PK (2001) The second international symposium on fibre-reinforced plastics in dentistry. Nijmegen, The Netherlands
Sperling LH (1994) In: Klemper D, Sperling LH, Utracki LA (eds) Interpenetrating polymer networks, pp 3–11
Culy G, Tyas MJ (1998) Aust Dent J 43:1
Thwe MM, Liao K (2002) Compos A 33:43
De Vekeyl RC, Majumdar AJ (1970) J Mater Sci 5:183
Matinlinna JP, Dahl JE, Karlsson S, Lassila LVJ, Vallittu PK (2009) In: Mittal KL (Ed) Silanes and other coupling agents, vol 5. BRILL/VSP, Leiden, The Netherlands, pp 107–121
Vallittu PK (2001) The second international symposium on fibre-reinforced plastics in dentistry. Nijmegen, The Netherlands
Segerström S, Ruyter IE (2009) Dent Mater 25:845
Gale MS, Darvell BW (1999) J Dent 27:89
Blake A (1985) Handbook of mechanics, materials, and structures. Wiley-Interscience, Malden
Datsko J, Arbor A (1997) Materials selection for design and manufacturing: theory and practice. J CRC Press, Taylor & Francis Group, Boca Raton, FL
Campo EA (2008) Selection of polymeric materials: how to select design properties from different standards. Willian Andrew Inc, NY
Lassila LVJ, Tanner J, Bell AML, Narva K, Vallittu PK (2004) Dent Mater 20:29
Vallittu PK (1998) J Prosthet Dent 82:132
Li W, Swaina MV, Li Q, Ironside J, Steven GP (2004) Biomater 25:4987
Van Noort R (2007) Introduction to dental materials, 3rd edn. Mosby, PA, USA
Oysaed H, Ruyter IE, Kleven IJS (1988) J Dent Res 67:1289
Wataha JC, Lockwood PE, Bouillaguet S, Noda M (2003) Dent Mater 19:25
Schmalz G, Arenholt-Bindslev D (2009) Biocompatibility of dental materials. Springer, New York, NY
Willershausen B, Kottgen C, Ernst CP (2001) Eur J Med Res 6:433
Strassler HE (2008) Inside dentistry 4, http://www.insidedentistry.net/article.php?id=832, accessed on Aug 28, 2010
Heravi F, Moazzami SM, Tahmasbi S (2007) J Dent 4:53
Strassler HE, Serio CL (2007) Dent Clin North Am 51:507
Valiathan A, Dhar S (2006) Trends Biomater Artif Organs 20:16
Garoushi S, Vallittu PK (2007) Libyan J Med (www.ljm.org.ly), AOP: 061206, pp 40–42
Freilich MA, Meiers JC, Duncan JP, Eckrote KA, Goldberg AJ (2002) JADA Continuing Education, American Dental Association, Chicago, USA
Feinman RA, Smidt A (1997) PP&A 9:925
Kermanshah H, Motevasselian F (2010) Oper Dent 35:238
Behr M, Rosentritt M, Latzel D, Handel G (2003) Clin Oral Investig 7:135
Karmaker A. Fiber reinforced composite post, patent application number: 20090246738, Origin: Cincinnati, OH, USA
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Zhang, M., Matinlinna, J.P. E-Glass Fiber Reinforced Composites in Dental Applications. Silicon 4, 73–78 (2012). https://doi.org/10.1007/s12633-011-9075-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-011-9075-x