Abstract
The influence of Ce or Ce and Mn combined additions on the morphology of α-Fe phases in recycled Al-Si alloys was experimentally investigated by microstructure observation and room temperature tensile testing. It is found that Ce modifies the morphology of α-Fe phase from the large Chinese script-like into the individual and fine nodular shape. A combined addition of Ce and Mn results in the promotion of primary α-Fe formation, and their size increases considerably with the increase in Ce content. The mechanism of the above morphological changes was discussed in accordance with the nucleation and growth of α-Fe phase during solidification.
Similar content being viewed by others
References
X. R. Yang, W.M. Mao, and C. Gao, Semisolid A356 alloy feedstock poured through a serpentine channel, Int. J. Miner. Metall. Mater., 16(2009), No. 5, p. 603.
Y.L. Bai, J. Xu, Z.F. Zhang, W.M. Mao, and H. Xu, Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy, Int. J. Miner. Metall. Mater., 16(2009), No. 4, p. 422.
W. Khalifa, F.H. Samuel, and J.E. Gruzleski, Iron intermetallic phases in the Al corner of the Al-Si-Fe system, Metall. Mater. Trans. A, 34(2003), No. 13, p. 807.
P. Ashtari, H. Tezuka, and T. Sato, Influence of Sr and Mn additions on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys, Mater. Trans., 44(2003), No. 12, p. 2611.
A. Flores-V, M. Sukiennik, A.H. Castillejos-E, F.A. Acosta-G, and J.C. Escobedo-B, A kinetic study on the nucleation and growth of the Al8FeMnSi2 intermetallic compound for aluminum scrap purification, Intermetallics, 6(1998), No. 3, p. 217.
S.G. Shabestari, The effect of iron and manganese on the formation of intermetallic compounds in aluminum-silicon alloys, Mater. Sci. Eng. A, 383(2004), No. 2, p. 289.
H.R. Zhou, X.G. Li, C.F. Dong, K. Xiao, and T. Li, Corrosion behavior of aluminum alloys in Na2SO4 solution using the scanning electrochemical microscopy technique, Int. J. Miner. Metall. Mater., 16(2009), No. 1, p. 84.
L. Lu, A.K. Dahle, Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys, Metall. Mater. Trans. A, 36(2005), No. 3, p. 819.
A. Couture, Iron in aluminum casting alloys: a literature survey, AFS Int. Cast Met. J., 1981, No. 6, p. 9.
G.S. Fu, F.S. Sun, L.M. Ren, W.Z. Chen, and K.W. Qian, Modification behavior of trace rare earth on impurity phases in commercial purity aluminum, J. Rare Earths, 20(2002), No. 1, p. 61.
X. Cao and J. Campbell, Precipitation of primary intermetallic compounds in liquid Al 11.5 Si 0.4 Mg alloy, Int. J. Cast Met. Res., 13(2000), No. 3, p. 175.
X. Cao and J. Campbell, The nucleation of Fe-rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys, Metall. Mater. Trans. A, 34(2003), No. 7, p. 1409.
C.M. Dinnis, J.A. Taylor, and A.K. Dahle, As-cast morphology of iron-intermetallics in Al-Si foundry alloys, Scripta Mater., 53(2005), No. 8, p. 955.
X. Cao and J. Campbell, The solidification characteristics of Fe-rich intermetallics in Al-11.5Si-0.4Mg cast alloys, Metall. Mater. Trans. A, 35(2004), No. 5, p. 1425.
G. Pucella, A.M. Samuel, F.H Samuel, H.W. Doty, and S. Valtierra, Sludge formation in Sr-modified Al-11.5wt%Si diecasting alloys, AFS Trans., 24(1999), p. 117.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fan, C., Long, Sy., Yang, Hd. et al. Influence of Ce and Mn addition on α-Fe morphology in recycled Al-Si alloy ingots. Int J Miner Metall Mater 20, 890–895 (2013). https://doi.org/10.1007/s12613-013-0811-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-013-0811-7