Abstract
The effects of annealing temperature and grit blasting pressure on the recrystallization behavior of a Ni3Al based single crystal superalloy were studied in this work. The results show that the precipitation of the Y-NiMo phase occurs at 900 and 1000 °C, which precedes recrystallization. The initial recrystallization temperature was between 1000 and 1100 °C. Cellular recrystallization was formed at 1100 and 1200 °C, which consisted of large columnar γ′ and fine γ + γ′. The dendrite arm closed to the interdendritic region may act as nucleation sites during initial recrystallization by a particle simulated nucleation mechanism at 1280 °C. The size of the grains first turned large and then became small upon the pressure while the recrystallization depth increased all the time.
Similar content being viewed by others
References
Meng J., Jin T., Sun X.F., and Hu Z.Q., Effect of surface recrystallization on the creep rupture properties of a nickel-base single crystal superalloy, Mater. Sci. and Eng. A, 2010, 527(23): 6119.
Zhang B., Liu C.K., Lu X., Tao C.H., and Jiang T., Effect of surface recrystallization on the creep rupture property of a single-crystal superalloy, Rare Metals, 2010, 29(4): 413.
Okazaki M., Ohtera I., and Harada Y., Damage repair in CMSX-4 alloy without fatigue life reduction penalty, Metall. Mater. Trans. A, 2004, 35(2): 535.
Jo C.Y., and Kim H.M., Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel based superalloy CMSX-2 Part 2—Creep behaviour of surface recrystallised single crystal, Mater. Sci. Technol., 2003, 19(12): 1671.
Okazaki M., Hiura T., and Suzuki T., Effect of local cellular transformation on fatigue small crack growth in CMSX-4 and CMSX-2 at high temperature, [in] Superalloys 2000, TMS, 2000, 505.
Khan T., Caron P., and Nakagawa Y.G., Mechanical behavior and processing of DS and single crystal superalloys, J. Met, 1986, 38: 16.
Meng J., Jin T., Sun X.F., and Hu Z.Q., Surface recrystallization of a single crystal nickel-base superalloy, Int. J. Min. Met. Mater., 2011, 18(2): 197.
Xiong J.C., Li J.R., and Liu S.Z., Surface recrystallization in nickel base single crystal superalloy DD6, Chinese J. Aeronaut., 2010, 23(4): 478.
Xiong J.C., Li J.R., Liu S.Z., Zhao J.Q., and Han M., Effects of carburization on recrystallization behavior of a single crystal superalloy, Mater. Charact., 2010, 61(7): 749.
Zhang B., Liu C.K., He Y.H., Tao C.H., and Lu X., Recrystallization of SRR99 single-crystal superalloy: kinetics and microstructural evolution, Rare Metals, 2010, 29(3): 312.
Zhang B., Tao C.H., Lu X., Liu C.K., Hu C.Y., and Bai M.Y., Recrystallization of single crystal nickel-based superalloy, J. Iron. Steel. Res. Int., 2009, 16(6): 75.
Cox D.C., Roebuck B., Rae C.M.F., and Reed R.C., Recrystallisation of single crystal superalloy CMSX-4, Mater. Sci. Technol., 2003, 19(4): 440.
Jo C.Y., Cho H.Y., and Kim H.M., Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel base superalloy CMSX-2 Part 1-Microstructural evolution during recrystallization of single crystal, Mater. Sci. Technol., 2003, 19(12): 1665.
Bürgel R., Portella P.D., and Preuhs J., Recrystallization in single crystals of nickel base superalloys, [in] Superalloys 2000, TMS, 2000, 229.
Bond S.D., and Martin J.W., Surface recrystallization in a single crystal nickel-based superalloy, J. Mater. Sci., 1984, 19(12): 3867.
Li Y.N., and Han Y.F., Recrystallization of Ni3Al base single crystal alloy IC6SX with different surface mechanical processes, J. Mater. Sci.Technol., 2010, 26(10): 883.
Li Y.N., He D., Li S.S., and Han Y.F., Surface recrystalliztion in a Ni3Al base single crystal alloy IC6SX, Acta. Metall. Sin., 2008, 44(4): 391.
Li P., Li S.S., and Han Y.F., Influence of solution heat treatment on microstructure and stress rupture properties of a Ni3Al base single crystal superalloy IC6SX, Intermetallics, 2011, 19(2): 182.
Jiang L.W., Li S.S., Qiu Z.C., and Han Y.F., Effects of withdrawal rate on microstructure and stress rupture properties of a Ni3Al-based single crystal superalloy IC6SX, Acta. Metall. Sin., 2009, 45(5): 547.
Ding R.G., Ojo O.A., and Chaturvedi M.C., Laser beam weld-metal microstructure in a yttrium modified directionally solidified Ni3Al-base alloy, Intermetallics, 2007, 15(12):1504.
Xiao C.B., and Han Y.F., Study of precipitates due to the addition of silicon in yttrium modified Ni-Al-Mo-B alloy IC6, Mater. Sci. and Eng. A, 2002, 323(1–2): 58.
Song J.X., Xiao C.B., Li S.S., and Han Y.F., Effect of long term aging on microstructure and mechanical properites of Ni3Al base alloy IC6, Acta. Metall. Sin., 2002, 38(3): 250.
Han Y.F., Li S.H., Jin Y., and Chaturvedi M.C., Effect of 900∼1150 °C aging on the microstructure and mechanical properties of a DS casting Ni3Al-base alloy IC6, Mater. Sci. and Eng. A, 1995, 192–193: 899.
Li M., Song J.X., Li S.S., and Han Y.F., Effects of long-term aging at 1070 °C on microstructure and mechanical properties of Ni3Al-base alloy IC6E, Mater. Sci. Forum., 2010, 650: 205.
Humphreys F.J., and Hatherly M., Recrystallization and Related Annealing Phenomena (2nd ed), New York: Elsevier, 2004, 310.
Porter A., and Ralph B., The recrystallization of nickel-base superalloys, J. Mater. Sci., 1981, 16(3): 707.
Xiao C.B., and Han Y.F., Effect of silicon on microstructure and stress rupture properties at 1100 °C of yttrium modified Ni-Al-Mo-B alloy IC6, J. Mater. Sci., 2001, 36(4): 1027.
Humphreys F.J., and Hatherly M., Recrystallization and Related Annealing Phenomena (2nd ed), Elsevier, New York: 2004, 48.
Wu Y.X., Recrystallization of Ni3Al Based Single Crystal Superalloys [Dissertation], Beihang University, Beijing, 2011: 31.
Mao W. M., and Zhao X. B., Recrystallization and Grain Growth in Metals, Metallurgical Industry Press, Beijing, 1994: 56.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Wu, Y., Yang, R., Li, S. et al. Surface recrystallization of a Ni3Al based single crystal superalloy at different annealing temperature and blasting pressure. Rare Metals 31, 209–214 (2012). https://doi.org/10.1007/s12598-012-0493-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12598-012-0493-8