Skip to main content
Log in

Research on process of preparation and performance of iron phosphate as precusor of lithium iron phosphate

  • Published:
Rare Metals Aims and scope Submit manuscript

Abstract

Lithium iron phosphate with the structure of olivine has many advantages: low price, environmentally friendly, great thermal stability and excellent cycle performance when used as the anode materials, making it one of the most promising anode materials. In this article, we used the precusor FePO4 pre-prepared to produce LiFePO4 and the performances were tested. The process of preparation of the precusor FePO4 were optimized and the reaction mechanism was probed into. The precusor FePO4 was prepared by the raw materials as follows: ferric nitrate, phosphoric acid and diammonium hydrogen phosphate, the temperature, PH, Fe/P and the time of reaction were considered. LiFePO4 was prepared by calcining the mixture of iron phosphate, lithium carbonate and glucose after mixed. The test of charge-discharge indicates that the sample of LiFePO4 holds the discharging voltage platform 3.4 V, the first charge-discharge specific capacity under 0.1C are 164.6 and 163.6 mAh/g respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Padhi A.K., Nanjundaswamy K.S., Masquelier C., Okada S., and Goodenough J.B., Effect of structure on the Fe3+/Fe2+ redox couple in iron phosphates, J. Electrochem.Soc., 1997, 144: 1609.

    Article  CAS  Google Scholar 

  2. Anderson A.S., Kalska B., Haggstrom I., and Thomas J.O., Lithium extraction/insertion in LiFePO4: an XRD and Mössbauer spectroscopy study, Solid State Ionics, 2000, 130: 41.

    Article  Google Scholar 

  3. Ravet N., Gauthier M., Zaghib K., Goodenough J.B., Mauger A., Gendron F., and Julien C.M., Mechanism of the Fe3+ reduction at low temperature for LiFePO4 synthesis from a polymeric additive, J. Chem. Mater., 2007, 19: 2595.

    Article  CAS  Google Scholar 

  4. Chung S.Y., and Chiang Y.M., Microscale measurements of the electrical conductivity of doped LiFePO4, Eletrochem. Solid-State Lett., 2003, 6: A278.

    Article  CAS  Google Scholar 

  5. Ravet N., Abouimrane A., and Armand M., On the electronic conductivity of phospho-olivines as lithium storage electrodes, Nat. Mater., 2003, 2: 702.

    Article  CAS  Google Scholar 

  6. Indrajeet V.T., Mathur V., John N.H., and Wheeler D.R., Performance of carbon-fiber-containing LiFePO4 cathodes for high-power applications, J. Power Sources, 2006, 162: 673.

    Article  Google Scholar 

  7. Gaberscek M., Dominko R., and Jamnik J., An example study on LiFePO4 cathodes, Electrochem. Commun., 2007, 9: 2778.

    Article  CAS  Google Scholar 

  8. Morgan D., Van A., and Ceder G., Li Conductivity in Lix-MPO4 (M =Mn, Fe, Co, Ni) Olivine Materials, Electrochem. Solid-State Lett., 2004, 7(2): A30.

    Article  CAS  Google Scholar 

  9. Delmas C., Maccario M., Croguennec L., Cras F., and Weill F., Lithium deintercalation in LiFePO4 nanoparticles via a domino-cascade model, Nat. Mater., 2008, 7: 665.

    Article  CAS  Google Scholar 

  10. Zhi X., Liang G., Wang L., Ou X., Zhang J., and Cui J., The cycling performance of LiFePO4/C cathode materials, J. Power Sources, 2009, 189: 779.

    Article  CAS  Google Scholar 

  11. Liu Haowen, Yang Hanmin, and Li Jinlin, A novel method for preparing LiFePO4 nanorods as a cathode material for lithium-ion power batteries, Electrochim. Acta, 2010, 55(5): 1626.

    Article  CAS  Google Scholar 

  12. Choi Daiwon, and Kumta Prashant N, Surfactant based sol-gel approach to nanostructured LiFePO4 for high rate Li-ion batteries, Journal of Power Sources, 2007, 163: 1064.

    Article  Google Scholar 

  13. Zheng Junchao, Li Xinhai, Wang Zhixing, Guo Huajun, and Zhou Shaoyun, LiFePO4 with enhanced performance synthesized by a novel synthetic route, Journal of Power Sources, 2008, 184: 574.

    Article  CAS  Google Scholar 

  14. Dinesh Rangappa, Koji Sone, Tetsuichi Kudo, and Itaru Honma, Directed growth of nanoarchitectured LiFePO4 electrode by solvothermal synthesis and their cathode properties, J. Power Sources, 2010, 195(18): 6167.

    Article  CAS  Google Scholar 

  15. Ravet N., Gauthier M., Zaghib K., Goodenough J.B., Mauger A., Gendron F., and Julien C.M., Mechanism of the Fe3+ Reduction at Low Temperature for LiFePO4 Synthesis from a Polymeric Additive, J. Chem. Mater., 2007, 19: 2595.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Shigang Lu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Jiang, D., Zhang, X., Lu, S. et al. Research on process of preparation and performance of iron phosphate as precusor of lithium iron phosphate. Rare Metals 30 (Suppl 1), 52–54 (2011). https://doi.org/10.1007/s12598-011-0236-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12598-011-0236-2

Keywords

Navigation