Abstract
Hybrid electro-active polymer actuator using poly(vinylidene fluoride)(PVDF) membranes enhanced with bacterial cellulose nanowhiskers (BCNW) are developed through an electrospinning method and hence characterized. PVDF is dissolved in DMF and acetone solvent to prepare the PVDF solution for the electrospinning. Nanowhiskers of bacterial cellulose are extracted by hydrolysis using sulfonic acid. PVDF-BCNW composite membranes with porous structure are prepared via an electrospinning method according to the BCNW contents. The crystallinity of the PVDF-BCNW composites through the XRD and DSC analysis are decreased as 50.2% and 43.7%, considerably, meanwhile, the electrolyte holding capacity of the PVDF-BCNW composite is increased as 760%, significantly. The actuating performance is also enhanced significantly as ±3.4 mm and 4.5 mm for the sinusoidal and step inputs. Electro active actuators based on the PVDF-BCNW composite produced by dipping and drying method showes significantly improved displacement because of the synergistic effect of ion migration and electrochemical doping process when the voltage is applied. A novel PVDF-BCNW actuators are useful for items such as biomimetic robots and other diverse applications.
Similar content being viewed by others
References
Bar-Cohen, Y., “Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges,” SPIE, 2nd Ed., http://ebooks.spiedigitallibrary.org/content.aspx?bookid=146§ionid=31570681.html (Accessed 16 JAN 2014)
Osada, Y., Okuzaki, H., and Hori, H., “A Polymer Gel with Electrically Driven Motility,” Nature, Vol. 355, No. 6357, pp. 242–244, 1992.
Lughmani, W. A., Jho, J. Y., Lee, J. Y., and Rhee, K., “Modeling of Bending Behavior of IPMC Beams using Concentrated Ion Boundary Layer,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 5, pp. 131–139, 2009.
Smela, E., “Conjugated Polymer Actuators for Biomedical Applications,” Advanced Materials, Vol. 15, No. 6, pp. 481–494, 2003.
Nguyen, C. H., Alici, G., and Wallace, G. G., “Modelling Trilayer Conjugated Polymer Actuators for their Sensorless Position Control,” Sensors and Actuators A: Physical, Vol. 185, pp. 82–91, 2012.
Yun, S., Kim, J., and Lee, K. S., “Evaluation of Cellulose Electro-Active Paper Made by Tape Casting and Zone Stretching Methods,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 6, pp. 987–990, 2010.
Pelrine, R., Kornbluh, R., Pei, Q., and Joseph, J., “High-Speed Electrically Actuated Elastomers with Strain Greater than 100%,” Science, Vol. 287, No. 5454, pp. 836–839, 2000.
Baughman, R. H., Cui, C., Zakhidov, A. A., Iqbal, Z., Barisci, J. N., and et al., “Carbon Nanotube Actuators,” Science, Vol. 284, No. 5418, pp. 1340–1344, 1999.
Cho, K. J., Koh, J. S., Kim, S., Chu, W. S., Hong, Y., and Ahn, S. H., “Review of Manufacturing Processes for Soft Biomimetic Robots,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 171–181, 2009.
Kim, M. S., Chu, W. S., Lee, J. H., Kim, Y. M., and Ahn, S. H., “Manufacturing of Inchworm Robot using Shape Memory Alloy (SMA) Embedded Composite Structure,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 3, pp. 565–568, 2011.
Spinks, G. M., Alici, G., McGovern, S., Xi, B., and Wallace, G. G., “Conjugated Polymer Actuators: Fundamentals,” Biomedical Applications of Electroactive Polymer Actuators, Vol. 195–227, 2009.
Martínez-Sanz, M., Lopez-Rubio, A., and Lagaron, J. M., “Optimization of the Nanofabrication by Acid Hydrolysis of Bacterial Cellulose Nanowhiskers,” Carbohydrate Polymers, Vol. 85, No. 1, pp. 228–236, 2011.
Jeon, J. H., Oh, I. K., Kee, C. D., and Kim, S. J., “Bacterial Cellulose Actuator with Electrically Driven Bending Deformation in Hydrated Condition,” Sensors and Actuators B: Chemical, Vol. 146, No. 1, pp. 307–313, 2010.
Eichhorn, S. J., “Cellulose Nanowhiskers: Promising Materials for Advanced Applications,” Soft Matter, Vol. 7, No. 2, pp. 303–315, 2011.
Huang, J., Liu, L., and Yao, J., “Electrospinning of Bombyx Mori Silk Fibroin Nanofiber Mats Reinforced by Cellulose Nanowhiskers,” Fibers and Polymers, Vol. 12, No. 8, pp. 1002–1006, 2011.
Park, W. I., Kang, M., Kim, H. S., and Jin, H. J., “Electrospinning of Poly (Ethylene Oxide) with Bacterial Cellulose Whiskers,” Wiley Online Library, Vol. 249–250, No. 1, pp. 289–294, 2007.
Martínez-Sanz, M., Olsson, R. T., Lopez-Rubio, A., and Lagaron, J. M., “Development of Bacterial Cellulose Nanowhiskers Reinforced EVOH Composites by Electrospinning,” Journal of Applied Polymer Science, Vol. 124, No. 2, pp. 1398–1408, 2012.
Madden, P. G. A., Madden, J. D. W., Anquetil, P. A., Vandesteeg, N. A., and Hunter, I. W., “The Relation of Conducting Polymer Actuator Material Properties To Performance,” Oceanic Engineering, IEEE Journal of, Vol. 29, No. 3, pp. 696–705, 2004.
Temmer, R., Must, I., Kaasik, F., Aabloo, A., and Tamm, T. “Combined Chemical and Electrochemical Synthesis Methods for Metal-Free Polypyrrole Actuators,” Sens. Actuators, B, Vol. 166, pp. 411–418, 2012.
Terasawa, N., Mukai, K., Yamato, K., and Asaka, K., “Superior Performance of Manganese Oxide/Multi-Walled Carbon Nanotubes Polymer Actuator over Ruthenium Oxide/Multi-Walled Carbon Nanotubes and Single-Walled Carbon Nanotubes,” Sensors and Actuators B: Chemical, Vol. 171–172, pp. 595–601, 2012.
Ding, J., Zhou, D., Spinks, G., Wallace, G., Forsyth, S., Forsyth, M., and MacFarlane, D., “Use of Ionic Liquids as Electrolytes in Electromechanical Actuator Systems Based on Inherently Conducting Polymers,” Chemistry of Materials, Vol. 15, No. 12, pp. 2392–2398, 2003.
Lu, W., Fadeev, A. G., Qi, B., Smela, E., Mattes, B. R., and et al., “Use of Ionic Liquids for p-Conjugated Polymer Electrochemical Devices,” Science, Vol. 297, No. 5583, pp. 983–987, 2002.
Fahma, F., Iwamoto, S., Hori, N., Iwata, T., and Takemura, A., “Effect of Pre-Acid-Hydrolysis Treatment on Morphology and Properties of Cellulose Nanowhiskers from Coconut Husk,” Cellulose, Vol. 18, No. 2, pp. 443–450, 2011.
Gaihre, B., Alici, G., Spinks, G. M., and Cairney, J. M., “Effect of Electrolyte Storage Layer on Performance of PPy-PVDF-PPy Microactuators,” Sensors and Actuators B: Chemical, Vol. 155, No. 2, pp. 810–816, 2011.
Martínez-Sanz, M., Olsson, R. T., Lopez-Rubio, A., and Lagaron, J. M., “Development of Electrospun EVOH Fibres Reinforced with Bacterial Cellulose Nanowhiskers. Part I: Characterization and Method Optimization,” Cellulose, Vol. 18, No. 2, pp. 335–347, 2011.
Kim, S. S., Jeon, J. H., Kee, C. D., and Oh, I. K., “Electro-Active Hybrid Actuators based on Freeze-Dried Bacterial Cellulose and PEDOT: PSS,” Smart Materials and Structures, Vol. 22, No. 8, pp. 085026, 2013.
Fang, Y., Tan, X., and Alici, G., “Redox Level-Dependent Impedance Model for Conjugated Polymer Actuators,” Sensors and Actuators B: Chemical, Vol. 132, No. 1, pp. 182–190, 2008.
Pickup, P. G., “Alternating Current Impedance Study of a Polypyrrole-Based Anion-Exchange Polymer,” J. Chem. Soc., Faraday Trans., Vol. 86, No. 21, pp. 3631–3636, 1990.
Kuang, X., Q. Gao, and H. Zhu, “Effect of Calcination Temperature of TiO2 on the Crystallinity and the Permittivity of PVDFTrFE/TiO2 Composites,” Journal of Applied Polymer Science, Vol. 129, No. 1, pp. 296–300, 2012.
Huang, S., Yee, W. A., Tjiu, W. C., Liu, Y., Kotaki, M., and et al., “Electrospinning of Polyvinylidene Difluoride with Carbon Nanotubes: Synergistic Effects of Extensional Force and Interfacial Interaction on Crystalline Structures,” Langmuir, Vol. 24, No. 23, pp. 13621–13626, 2008.
Chen, Y., Liu, C., Chang, P. R., Cao, X., and Anderson, D. P., “Bionanocomposites based on Pea Starch and Cellulose Nanowhiskers Hydrolyzed from Pea Hull Fibre: Effect of Hydrolysis Time,” Carbohydrate Polymers, Vol. 76, No. 4, pp. 607–615, 2009.
Li, Z., Su, G., Gao, D., Wang, X., and Li, X., “Effect of Al2O3 Nanoparticles on the Electrochemical Characteristics of P (VDFHFP)-based Polymer Electrolyte,” Electrochimica acta, Vol. 49, No. 26, pp. 4633–4639, 2004.
He, L., Xu, Q., Hua, C., and Song, R., “Effect of MultiWalled Carbon Nanotubes on Crystallization, Thermal, and Mechanical Properties of Poly (Vinylidene Fluoride),” Polymer Composites, Vol. 31, No. 5, pp. 921–927, 2010.
Jeon, J. H., Oh, I. K., Kee, C. D., and Kim, S. J., “Bacterial Cellulose Actuator with Electrically Driven Bending Deformation in Hydrated Condition,” Sensors and Actuators B: Chemical, Vol. 146, No. 1, pp. 307–313, 2010.
Thinh, N. T., Yang, Y. S., and Oh, I. K., “Adaptive Neuro-Fuzzy Control of Ionic Polymer Metal Composite Actuators,” Smart Materials and Structures, Vol. 18, No. 6, pp. 065016, 2009.
Li, J., Vadahanambi, S., Kee, C. D., and Oh, I. K., “Electrospun Fullerenol-Cellulose Biocompatible Actuators,” Biomacromolecules, Vol. 12, No. 6, pp. 2048–2054, 2011.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, SS., Kee, CD. Electro-active polymer actuator based on PVDF with bacterial cellulose nano-whiskers (BCNW) via electrospinning method. Int. J. Precis. Eng. Manuf. 15, 315–321 (2014). https://doi.org/10.1007/s12541-014-0340-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-014-0340-y