Abstract
In this paper, the low-velocity impact damage in composite laminates was investigated by three NDE (Non-destructive Evaluation) techniques, Electronic Speckle Pattern Interferometry (ESPI), digital shearography and ultrasound C-scan. The objective of this study is to evaluate the detection performance of each NDE technique against low-velocity impact damage in fiber glass composite laminates when the specimen was inspected from front surface (impact side) which may be available in depot level. Unidirection and crossply fiber glass composite laminates were impact damaged with four energy levels (5, 10, 15, 18 J) by drop weight impact machine. The results showed that ESPI and digital shearography techniques were able to identify the barely visible low-velocity impact damage. However, some limitations for detection depth were found in ESPI and digital shearography because the impact damage on reverse side was rarely detected by them. Nonetheless, ESPI and digital shearography techniques were estimated as one of useful NDE methods embedded with improved post processings including image process and optimal calibration method for different excitations.
Similar content being viewed by others
References
Reifsnider, K. L., “Damage in composite materials,” ASTM International, 1982.
Abrate, S., “Impact on composite structures,” Cambridge University Press, 1998.
Cantwell, W. J. and Morton, J., “The impact resistance of composite materials — a review,” Composites, Vol. 22, No. 5, pp. 347–362, 1991.
Yin, W. L., Sallam, S. N., and Simitses, G. J., “Ultimate axial load capacity of a delaminated beam-plate,” AIAA Journal, Vol. 24, No. 1, pp. 123–128, 1986.
Ambu, R., Aymerich, F., Ginesu, F., and Priolo, P., “Assessment of NDT interferometric techniques for impact damage detection in composite laminates,” Composites Science and Technology, Vol. 66, No. 2, pp. 199–205, 2006.
Zhang, Z. Y., Richardson, M. O. W., Wisheart, M., Tyrer, J. R., and Petzing, J., “ESPI non-destructive testing of GRP composite materials containing impact damage,” Composites Part A: Applied Science and Manufacturing, Vol. 29, No. 7, pp. 721–729, 1998.
Ruzek, R., Lohonka, R., and Jironc, J., “Ultrasound C-Scan and shearography NDI techniques evaluation of impact defects identification,” NDT & E International, Vol. 39, No. 2, pp. 132–142, 2006.
Diamanti, K., Hodgkinson, J. M., and Soutis, C., “Detection of low-velocity impact damage in composite plates using Lamb waves,” Structural Health Monitoring, Vol. 3, No. 1, pp. 33–41, 2004.
Aymerich, F. and Staszewski, W. J., “Impact damage detection in composite laminates using nonlinear acoustics,” Composites Part A: Applied Science and Manufacturing, Vol. 41, No. 9, pp. 1084–1092, 2010.
Potel, C., Chotard, T., de Belleval, J. F., and Benzeggagh, M., “Characterization of composite materials by ultrasound methods: modelization and application to impact damage,” Composites Part B: Engineering, Vol. 29, No. 2, pp. 159–169, 1998.
Rastogi, P. K., “Digital speckle pattern interferometry and related techniques,” John Wiley & Sons, 2001.
Baek, T. H. and Rudolphi, T. J., “A Hybrid Stress Measurement Using only x-displacements by Phase Shifting Method with Fourier Transform (PSM/FT) in Laser Speckle Interferometry and Least Squares Method,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 1, pp. 49–54, 2010.
Deaton, J. B., Wagner, J. W., and Rogowski, R. S., “Electronic Speckle Pattern Interferometry on a Microscopic Scale,” Journal of Nondestructive Evaluation, Vol. 13, No. 1, pp. 13–22, 1994.
Fletcher, M. J., “A review of optical inspection methods,” Insight, Vol. 38, No. 4, pp. 270–275, 1996.
Wang, W. C., Day, C. H., Hwang, C. H., and Chiou, T. B., “Nondestructive evaluation of composite materials by ESPI,” Research in Nondestructive Evaluation, Vol. 10, No. 1, pp. 1–15, 1998.
Maranon, A., Ruiz, P. D., Nurse, A. D., Huntley, J. M., Rivera, L., and Zhou, G., “Identification of subsurface delaminations in composite laminates,” Composites Science and Technology, Vol. 67, No. 13, pp. 2817–2826, 2007.
Lanza di Scalea, F., Spicer, J. B., and Green, R. E., “Electronic Shearography with Thermal Loading for Detecting Debonds in Thick Polyurethane/Steel Panels for Marine Applications,” Research in Nondestructive Evaluation, Vol. 12, No. 1, pp. 43–52, 2000.
Hung, Y. Y., Luo, W. D., Lin, L., and Shang, H. M., “Evaluating the soundness of bonding using shearography,” Composite Structures, Vol. 50, No. 4, pp. 353–362, 2000.
Růžek, R., Lohonka, R., and Jironč, J., “Ultrasonic C-Scan and shearography NDI techniques evaluation of impact defects identification,” NDT & E International, Vol. 39, No. 2, pp. 132–142, 2006.
Aymerich, F. and Meili, S., “Ultrasonic evaluation of matrix damage in impacted composite laminates,” Composites Part B: Engineering, Vol. 31, No. 1, pp. 1–6, 2000.
Jones, R. and Wykes, C., “Holographic and Speckle Interferometry,” Cambridge University Press, 1990.
Cloud, G., “Optical methods of Engineering Analysis,” Cambridge University Press, pp. 477–492, 1995.
Hong, S. S., “Digital Image Processing Algorithms for Electronic Speckle Pattern Intererometry,” M.Sc. Thesis, Mechanical Engineering, Michigan State University, 1997.
Aebischer, H. A. and Waldner, S., “Strain distributions made visible with image-shearing speckle pattern interferometry,” Opt. Lasers Eng., Vol. 26, No. 4–5, pp. 407–420, 1997.
Owner-Petersen, M., “Digital speckle pattern shearing interferometry: limitations and prospects,” Appl. Opt., Vol. 30, No. 19, pp. 2730–2738, 1991.
Chau, F. S. and Ng, T. W., “A real-time digital shearing speckle interferometer,” Meas. Sci. Technol., Vol. 3, No. 4, pp. 381–383, 1992.
Steinchen, W., Yang, L., Kupfer, G., and Mäckel, P., “Nondestructive testing of aerospace composite materials using digital shearography,” Journal of Aerospace Engineering, Vol. 212, No. 1, pp. 21–30, 1998.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, G., Hong, S., Jhang, KY. et al. NDE of low-velocity impact damages in composite laminates using ESPI, digital shearography and ultrasound C-scan techniques. Int. J. Precis. Eng. Manuf. 13, 869–876 (2012). https://doi.org/10.1007/s12541-012-0113-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-012-0113-4