Abstract
In the field of vehicle dynamics, commercial software can aid the designer during the conceptual and detailed design phases. Simulations using these tools can quickly provide specific design metrics, such as yaw and lateral velocity, for standard maneuvers. However, it remains challenging to correlate these metrics with empirical quantities that depend on many external parameters and design specifications. This scenario is the case with tire wear, which depends on the frictional work developed by the tire-road contact. In this study, an approach is proposed to estimate the tire-road friction during steady-state longitudinal and cornering maneuvers. Using this approach, a qualitative formula for tire wear evaluation is developed, and conceptual design analyses of cornering maneuvers are performed using simplified vehicle models. The influence of some design parameters such as cornering stiffness, the distance between the axles, and the steer angle ratio between the steering axles for vehicles with two steering axles is evaluated. The proposed methodology allows the designer to predict tire wear using simplified vehicle models during the conceptual design phase.
Similar content being viewed by others
References
Adams Manual (2011). http://www.kxcad.net/MSC_Software/dams_MD_R2/adams_tire/wwhelp/wwhimpl/common/html/wwhelp.htm?context=adams_tire&file=tire_models.3.14.html, visited 16/06/2011.
Bakker, E., Pacejka, H. B. and Lidner, L. (1989). A new tire model with an application in vehicle dynamics studies. SAE Paper No. 890087, 101–113.
Braghin, F., Cheli, F., Melzi, S. and Resta, F. (2006). Tyre wear model: Validation and sensitivity analysis. Meccanica 41,2, 143–156.
Da Silva, M. M. and Costa Neto, A. (2007). Handling analysis o a light commercial vehicle considering the frame flexibility. Int. Review of Mechanical Engineering (IREME) 1,4, 332–339.
Gillespie, T. D. (1992). Fundamentals of Vehicle Dynamics. Society of Automotive Engineers. Warrendale. PA.
Gipser, M. (2005). FTire: A physically based applicationoriented tyre model for use with detailed MBS and finite-element suspension models. Vehicle System Dynamics 43,1, 76–91.
Gunaratne, M., Bandara, N., Medzorian, J., Chawla, M. and Ulrich, P. (2000). Coorelation of tire wear and friction to texture of concrete pavements. J. Materials in Civil Engineering 10,1, 46–54.
Kang, N. (2009). Prediction of tire natural frequency with consideration of the enveloping property. Int. J. Automotive Technology 10,1, 65–71.
Kim, J. (2008). Analysis of handling performance based on simplified lateral vehicle dynamics. Int. J. Automotive Technology 9,6, 687–693.
Knisley, S. (2002). A correlation between rolling tire contact friction energy and indoor tread wear. Tire Sci. and Technol. 30,2, 83–99.
Lee, C., Hedrick, K. and Yi, K. (2004). Real-time slipbased estimation of maximum tire-road friction coefficient. IEEE/ASME Trans. Mechatronics 9,2, 454–458.
Miller, G. and Reed, R. (1991). Optimum ackerman for improved steering axle tire wear on trucks. SAE Trans. 100,2, 572–593.
Van der Auweraer, H., Janssens, J., de Oliveira, L., da Silva, M. and Desmet, W. (2007). Virtual prototyping for sound quality design of automobiles. Sound and Vibration 41,4, 26–30.
Veith, A. G. (1986). The most complex tire-pavement interaction: Tire wear. ASTM Special Technical Publication, 929, 125–158.
Winkler, C. B. (1998). Simplified analysis of the steadystate turning of complex vehicles. Vehicle Systems Dynamics 29,3, 141–180.
Wu, X. D., Zuo, S. G., Lei, L., Yang, X. W. and Li, Y. (2011). Parameter identification for a Lugre model based on steady-state tire conditions. Int. J. Automotive Technology 12,5, 671–677.
Yang, S. M. and Kim, J. H. (2011). Derivation and validation of nonlinear governing equations for an analysis of vehicle handling. Int. J. Automotive Technology 12,4, 561–570.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Da Silva, M.M., Cunha, R.H. & Neto, A.C. A simplified model for evaluating tire wear during conceptual design. Int.J Automot. Technol. 13, 915–922 (2012). https://doi.org/10.1007/s12239-012-0092-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-012-0092-6