Abstract
Microcapsules containing oil drag-reducing polymer particles were prepared by melting-scattering and condensing of polyethylene wax, in-situ polymerization of urea and formaldehyde, and interfacial polymerization of styrene respectively. The related processes were studied by a molecular dynamics simulation method, and molecular design of microcapsule isolation agent was carried out on the basis of the simulation. The technologies for preparing microencapsulated oil drag-reducing polymer particles were compared and the circulation drag reducing efficiency of the microencapsulated polymer particles was evaluated based on the characterization results and their dissolution properties. Molecular design of a microcapsule isolation agent suggests that α-olefin polymer particles can be stably dispersed in water by using long-chain alkyl sodium salt surfactant which can prevent the agglomeration of α-olefin polymer particles. The results of simulation of the adsorption process shows that the amount of alkyl sodium salt surfactant can directly affect the stability of microencapsulated α-olefin polymer particles. and there must be a minimum critical amount of it. After characterization of the morphology by Scanning Electron Microscopy (SEM) and comparison of the static pressure stability, especially the conditions of reaction and technological control of microcapsules with different shell materials, microencapsulation of α-olefin polymer particles with poly-(urea-formaldehyde) as shell material was selected as the optimum scheme, because it can react under mild conditions and its technological process can be controlled in a large range. The relationship of drag reducing rate and dissolving time of microcapsules showed that the formation of microcapsules did not affect the maximum drag reducing rate, and the drag reducing rate of each sample can reach about 35% along with the dissolving time, i.e. microencapsulation did not affect the drag reducing property of α-olefin polymer.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
An Q Q, Hu S J, Wang Y P, et al. Preparation of Mesoporous Silica SBA-15/hyperbranched polyurethane hybrids and its structure and properties. Journal of Materials Engineering. 2008. (10): 374–377 (in Chinese)
Bhagat G C and Rochester N Y. Rotary brush development. U.S. Patent. 1974. 3357402
Burger E D, Chorn L G and Perkins T K. Studies of drag reduction conducted over a broad range of pipeline conditions when flowing Prudhoe bay crude oil. Journal of Rheology. 1980. 24(5): 603–626
Burger E D, Munk W R and Wahl H A. Flow increase in the trans Alaska pipeline flow using a polymeric drag reducing additive. SPE. 1980. 9419(9): 35–42
Cuenca F G, Marin M G and Diaz M B F. Energy-savings modeling of oil pipelines that use drag-reducing additives. Energy Fuels. 2008. 22(5): 3293–3298
Guan Z Y, Li G P, Zhao L Y, et al. A worldwide development in DRA study. Oil & Gas Storage and Transportation. 2001. 20(6): 1–4 (in Chinese)
Gyr A and Tsinober A. On the rheological nature of drag reduction phenomena. J. Non-Newtonian Fluid Mech. 1997. 73(2): 153–162
Hu T N. Applied experiments on drag reducer in home oil transportation pipelines. Oil & Gas Storage and Transportation. 1997. 16(6): 11–14 (in Chinese)
John D C, Rolla M and Gifford G M. Method of friction loss reduction in oleaginous fluids flowing through conduits. U.S. Patent. 1972. 3692676
Labude K M, Smith K W and Johnston R L. Drag reducing polymer suspensions. U. S. Patent. 2004. 6565053
Li G P, Yang R and Wang K H. The new research and production development of drag reducing agent in China and abroad. Oil & Gas Storage and Transportation. 2000. 19(1): 3–7 (in Chinese)
Macedo E N and Maneschy C E. Analysis of the mass transfer entry region for drag-reducing viscoelastic fluids in turbulent pipe flow. Int. Comm. Heat Mass Transfer. 2000. 27(1): 59–68
Meier D J, Cerrito E C and Kruka V R. Method and composition for reducing the frictional drag of flowing fluids. U.S. Patent. 1974. 3801508
Milligan S M and Smith K W. Drag-reducing polymers and drag-reducing polymer suspensions and solutions. U.S. Patent. 2000. 6576732
Pang M J and Wei J J. Progress in the study on turbulent flows of drag reducing surfactant solutions. Advances in Mechanics. 2010. 42(2): 129–146 (in Chinese)
Ram A and Kadim A. Shear degradation of polymer solutions. Journal of Applied Polymer Science. 1970. 14(8): 2145–2156
Song Z Z, Zhang X J and Ge J J. Research Situation of Crude Drag Reducing Agent. Oil-Gasfield Surface Engineering. 2000. 19(6): 7–9 (in Chinese)
Wang Y L and Dai J L. Drag reducing polymers: structure/property relationship. Oilfield Chemistry. 1990. 7(1): 98–106 (in Chinese)
Xu C, Li Y S, Wu H H, et al. Experimental study on drag reduction of surfactant. Oil & Gas Storage and Transportation. 2010. 29(2): 124–127 (in Chinese)
Xu Z H. Preparation of microcapsules and its application. New Chemical Materials. 2005. 33(11): 78–81 (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, B., Xing, W., Dong, G. et al. Preparation of microencapsulated α-olefin drag reducing polymer used in oil pipeline transportation. Pet. Sci. 8, 99–107 (2011). https://doi.org/10.1007/s12182-011-0121-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12182-011-0121-5