Abstract
Aluminum based Metal Matrix and Hybrid Composites are known to have various advantages over conventional materials when it comes to their various engineering applications, namely aerospace, automotive, and marine. Because of their enhanced characteristics, such as their strength and hardness, they are more commonly utilized in these areas. Due to their reinforced properties, the manufactured composites became more harder which complicates the machining while comparing with the base material. This makes the process of material removal more complex. One of the most common methods of removing these materials is through wire electrical discharge machining. This process allows the easy removal of these materials regardless of their hardness. In this study, the mechanical properties of different types of metal matrix and hybrid composites were analysed through wire electrical discharge machining. An explorative investigation has been performed to analyse the machinability of stir casted aluminium based hybrid and metal matrix composites (AA2024 + BN, AA2024 + AL2O3 + BN). Taguchi’s approach performs the planning of experiments and analysis of the attained data. The output measures considered in this investigation are material removal rate and dimensional deviation. The empirical relationships are developed by the multiple regression approach which is used to reveal the relationship between the independent and dependent variables. Various Multi Criteria Decision Making tools are adopted and the machinability of selected composites are analysed.
Similar content being viewed by others
Abbreviations
- MMC:
-
Metal matrix composites
- HMMC:
-
Hybrid metal matrix composites
- MCDM:
-
Multi-criterion decision making methods
- WEDM:
-
Wire electrical discharge machining
- OA:
-
Orthogonal array
- MRR:
-
Material removal rate
- DD:
-
Dimensional deviation
- GRA:
-
Grey relational analysis
- GRG:
-
Grey relational grade
- TOPSIS:
-
Technique for order of preference by similarity to ideal solution
References
Campbell, F. C.: ed. Lightweight materials: understanding the basics. ASM International, 2012
Liu, M., Guo, Y., Wang, J., Yergin, M.: Corrosion avoidance in lightweight materials for automotive applications. NPJ Mater. Degrad. 2(1), 1–4 (2018)
Macke, A., Schultz, B.F., Rohatgi, P.: Metal matrix composites. Adv. Mater. Process. 170(3), 19–23 (2012)
Harrigan, W.C., Jr.: Commercial processing of metal matrix composites. Mater. Sci. Eng. A 244(1), 75–79 (1998)
Ramnath, B.V., Elanchezhian, C., Annamalai, R.M., Aravind, S., Sri AnandaAtreya, T., Vignesh, V., Subramanian, C.: Aluminium metal matrix composites—a review. Rev. Adv. Mater. Sci. 38(5), 55–60 (2014)
Imran, M., Khan, A.A.: Characterization of Al-7075 metal matrix composites: a review. J. Mater. Res. Technol. 8(3), 3347–3356 (2019)
Chawla, N., Shen, Y.L.: Mechanical behavior of particle reinforced metal matrix composites. Adv. Eng. Mater. 3(6), 357–370 (2001)
Suresh, S., Shenbag, N., Moorthi, V.: Aluminium-titanium diboride (Al-TiB2) metal matrix composites: challenges and opportunities. Procedia Eng. 38, 89–97 (2012). https://doi.org/10.1016/j.proeng.2012.06.013
Yaghobizadeh, O., Baharvandi, H.R., Ahmadi, A.R., Aghaei, E.: Development of the properties of Al/SiC Nano-composite fabricated by stir cast method by means of coating SiC particles with Al. SILICON 11(2), 643–649 (2019). https://doi.org/10.1007/s12633-018-9867-3
Kim, C.-S., Cho, K., Manjili, M.H., Nezafati, M.: Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs). J. Mater. Sci. 52(23), 13319–13349 (2017)
Kandpal, B.C., Kumar, J., Singh, H.: Manufacturing and technological challenges in stir casting of metal matrix composites–a review. Mater. Today Proc. 5(1), 5–10 (2018)
Zhou, M.Y., Ren, L.B., Fan, L.L., Zhang, Y.W.X., Lu, T.H., Quan, G.F., Gupta, M.: Progress in research on hybrid metal matrix composites. J. Alloy. Compd. 838, 155274 (2020)
Xavior, M.A., Kumar, J.A.: Machinability of hybrid metal matrix composite—a review. Procedia Eng. 174, 1110–1118 (2017)
Thejasree, P., Manikandan, N., Krishnamachary, P. C., Varaprasad, K. C., and Selvi, B. J.: Application of Taguchi Approach on Wire Electrical Discharge Machining of SS304. No. 2021–28–0271. SAE Technical Paper, 2021
Krishna, M.V., Xavior, A.M.: An investigation on the mechanical properties of hybrid metal matrix composites. Procedia Eng. 97, 918–924 (2014)
Shridhar, T.N., Krishnamurthy, L., Sridhara, B.K.: Machinability studies on aluminium matrix hybrid composites. Adv. Mat. Res. 894, 27–31 (2014). https://doi.org/10.4028/www.scientific.net/amr.894.27
Padmavathi, K.R., Ramakrishnan, R.: Tribological behaviour of aluminium hybrid metal matrix composite. Procedia Eng. 97, 660–667 (2014)
Ravi Kumar, K., Kiran, K., Sreebalaji, V.S.: Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide. J. Alloys Compd. 723, 795–801 (2017). https://doi.org/10.1016/j.jallcom.2017.06.309
Gururaja, S., Ramulu, M., Pedersen, W.: Machining of MMCs: a review. Mach. Sci. Technol. 17(1), 41–73 (2013). https://doi.org/10.1080/10910344.2012.747897
Muley, A.V., Aravindan, S., Singh, I.P.: Nano and hybrid aluminum based metal matrix composites: an overview. Manuf. Rev. 2, 15 (2015)
Mavhungu, S.T., Akinlabi, E.T., Onitiri, M.A., Varachia, F.M.: Aluminum matrix composites for industrial use: advances and trends. Procedia Manuf. 7, 178–182 (2017). https://doi.org/10.1016/j.promfg.2016.12.045
Hemalatha, A., Reddy, V.D., Prasad, K.: Evolution of regression and ANFIS models for wire spark erosion machining of aluminium metal matrix composites for aerospace applications. Int. J. Interact. Des. Manuf. (2022). https://doi.org/10.1007/s12008-022-01012-x
Thévenot, F.: Boron Carbide—a comprehensive review. J. Eur. Ceram. Soc. 6(4), 205–225 (1990). https://doi.org/10.1016/0955-2219(90)90048-k
Asm International. Materials Information Society. ASM Engineered Materials Reference Book; Asm International: Metals Park, Ohio, 1994
Binoj, J. S., Thejasree, P., Palanisamy, D., Naidu, B., Manikandan, N., Raju, R., and Manideep, M.: Application of Multiple Regression Analysis for Wire Electrical Discharge Machining of Ti–6Al–4 V (Grade 5). In Recent Advances in Materials and Modern Manufacturing, pp. 1085–1093. Springer, Singapore, 2022
Vishnu Vardhana Naidu, B., Varaprasad, K. C., Manikandan, N., and Binoj, J. S.: Development of Multiple Regression Models for Wire Spark Erosion Machining of AA2024 Alloy. In Advances in Industrial Automation and Smart Manufacturing, pp. 653–661. Springer, Singapore, 2021
Palanisamy, D., Devaraju, A., Manikandan, N., Balasubramanian, K., Arulkirubakaran, D.: Experimental investigation and optimization of process parameters in EDM of aluminium metal matrix composites. Mater. Today Proc. 22, 525–530 (2020)
Thejasree, P., Binoj, J.S., Manikandan, N., Krishnamachary, P.C., Raju, R., Palanisamy, D.: Multi objective optimization of wire electrical discharge machining on Inconel 718 using Taguchi grey relational analysis. Mater. Today Proc. 39, 230–235 (2021)
Natarajan, M., Pasupuleti, T., Silambarasan, R., Ramesh, R., and Katta, L. N.: Development of Prediction Models for Spark Erosion Machining of SS304 Using Regression Analysis. No. 2022–28–0339. SAE Technical Paper, 2022
Thejasree, P., Narasimhamu, K.L., Natarajan, M., Raju, R.: Generative modelling of laser beam welded Inconel 718 thin weldments using ANFIS based hybrid algorithm. Int. J. Interact. Des. Manuf. (IJIDeM) (2022). https://doi.org/10.1007/s12008-022-00959-1
Manikandan, N., Varaprasad, K. C., Thejasree, P., Palanisamy, D., Arulkirubakaran, D., Raju, R., and Badrinath, K.: Prediction of Performance Measures Using Multiple Regression Analysis for Wire Electrical Discharge Machining of Titanium Alloy. In Recent Advances in Materials and Modern Manufacturing, pp. 601–612. Springer, Singapore, 2022
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Hemalatha, A., Reddy, V.D. & Hemachandra, S. Development of empirical models and machinability comparison on wire electrical discharge machining of aluminium based hybrid and metal matrix composites. Int J Interact Des Manuf (2023). https://doi.org/10.1007/s12008-023-01200-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12008-023-01200-3