Skip to main content
SpringerLink
Log in

A bi-directional interface for improved interaction with engineering models in virtual reality design reviews

  • Original Paper
  • Published:
International Journal on Interactive Design and Manufacturing (IJIDeM) Aims and scope Submit manuscript

Abstract

Leveraging virtual reality (VR) technology to enhance engineering design reviews has been an area of significant interest for researchers since the advent of modern VR. The ability to interact meaningfully with 3D computer-aided engineering models in these VR design reviews is an important, though often neglected, capability due to the difficulty of performing data translation between native computer-aided design (CAD) data and VR compatible file formats. A bi-directional interface was developed between a VR design review environment and a commercial CAD package that streamlines the data translation process. Transmitting both geometric data and selected metadata from the CAD system enabled the development of enhanced model interaction tools in a VR design review application. User experiments were performed that compared the enhanced tools developed to a baseline toolset. Participants success using these toolsets was measured as they performed tasks related to design understanding and decision making, such as counting the number of gears in a gearbox or evaluating the feasibility of a proposed design change in a four-cylinder engine. The analysis of the data from these experiments showed a statistically significant improvement in participants ability to understand the geometry of the model correctly, confidently, and quickly, as well as in participants ability to correctly and confidently understand the implications of a proposed design change when using the Enhanced Toolset. We conclude that the bi-directional interface concept developed in this work can be extended to enable advanced interaction with a diversity of engineering data in VR.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  1. Wilson, P.R.: A short history of CAD data transfer standards. IEEE Comput. Graph. Appl. 7(6), 64 (1987)

    Article  Google Scholar 

  2. Chen, Y.J., Chen, Y.M., Chu, H.C.: Enabling collaborative product design through distributed engineering knowledge management. Comput. Ind. 59(4), 395 (2008)

    Article  Google Scholar 

  3. Purschke, F., Schulze, M., Zimmermann, P.: Virtual reality-new methods for improving and accelerating the development process in vehicle styling and design. In: Proceedings of the IEEE Computer Graphics International, pp. 789–797 (1998)

  4. Whyte, J., Bouchlaghem, N., Thorpe, A., McCaffer, R.: From CAD to virtual reality: modelling approaches, data exchange and interactive 3D building design tools. Autom. Constr. 10(1), 43 (2000)

    Article  Google Scholar 

  5. Berg, L.P., Vance, J.M.: An industry case study: investigating early design decision making in virtual reality. J. Comput. Inf. Sci. Eng. 17(1), 011001 (2017)

    Article  Google Scholar 

  6. Huet, G., Culley, S.J., McMahon, C.A., Fortin, C.: Making sense of engineering design review activities. AI EDAM: Artif. Intell. Eng. Des. Anal. Manuf. 21(03), 243 (2007)

    Google Scholar 

  7. Cruz-Neira, C., Sandin, D.J., DeFanti, T.A., Kenyon, R.V., Hart, J.C.: The CAVE: audio visual experience automatic virtual environment. Commun. ACM 35(6), 64 (1992)

    Article  Google Scholar 

  8. Cruz-Neira, C., Sandin, D.J., DeFanti, T.A.: Surround-screen projection-based virtual reality: the design and implementation of the CAVE. In: Proceedings of the 20th Annual Conference on Computer Graphics and Interactive Techniques, ACM, pp. 135–142 (1993)

  9. Robinett, W., Rolland, J.P.: A computational model for the stereoscopic optics of a head-mounted display. Presence Teleoperators Virtual Environ. 1(1), 45 (1992)

    Article  Google Scholar 

  10. Bryson, S.: Virtual reality in scientific visualization. Commun. ACM 39(5), 62 (1996)

    Article  Google Scholar 

  11. Hsi, S., Linn, M.C., Bell, J.E.: The role of spatial reasoning in engineering and the design of spatial instruction. J. Eng. Educ. 86(2), 151 (1997)

    Article  Google Scholar 

  12. Bochenek, G.M., Ragusa, J.M.: Virtual (3D) collaborative environments: an improved environment for integrated product team interaction? In: System Sciences, 2003. Proceedings of the 36th Annual Hawaii International Conference on IEEE, pp. 10 (2003)

  13. Satter, K., Butler, A.: Competitive usability analysis of immersive virtual environments in engineering design review. J. Comput. Inf. Sci. Eng. 15(3), 031001 (2015)

    Article  Google Scholar 

  14. Banerjee, P., Bochenek, G.M., Ragusa, J.M.: Analyzing the relationship of presence and immersive tendencies on the conceptual design review process. J. Comput. Inf. Sci. Eng. 2(1), 59 (2002)

  15. Banerjee, P., Basu-Mallick, D.: Measuring the effectiveness of presence and immersive tendencies on the conceptual design review process. J. Comput. Inf. Sci. Eng. 3(2), 166 (2003)

    Article  Google Scholar 

  16. Ahlers, K.H., Kramer, A., Breen, D.E., Chevalier, P.Y., Crampton, C., Rose, E., Tuceryan, M., Whitaker, R.T., Greer, D.: Distributed augmented reality for collaborative design applications. In: Computer Graphics Forum, vol. 14, Wiley Online Library, vol. 14, pp. 3–14 (1995)

  17. Santos, P., Stork, A., Gierlinger, T., Pagani, A., Paloc, C., Barandarian, I., Conti, G., de Amicis, R., Witzel, M., Machui, O., et al.: Improve: an innovative application for collaborative mobile mixed reality design review. Int. J. Interact. Des. Manuf. 1(2), 115 (2007)

    Article  Google Scholar 

  18. Chryssolouris, G., Mavrikios, D., Pappas, M., Xanthakis, E., Smparounis, K.: A web and virtual reality-based platform for collaborative product review and customisation. In: Collaborative Design and Planning for Digital Manufacturing, pp. 137–152. Springer (2009)

  19. Hren, G., Jezernik, A.: A framework for collaborative product review. Int. J. Adv. Manuf. Technol. 42(7–8), 822 (2009)

    Article  Google Scholar 

  20. Greenhalgh, C., Benford, S.: MASSIVE: a distributed virtual reality system incorporating spatial trading. In: Distributed Computing Systems, 1995, Proceedings of the 15th International Conference on IEEE, pp. 27–34 (1995)

  21. Greenhalgh, C.: Evaluating the network and usability characteristics of virtual reality conferencing. BT Technol. J. 15(4), 101 (1997)

    Article  Google Scholar 

  22. Lehner, V.D., DeFanti, T., et al.: Distributed virtual reality: supporting remote collaboration in vehicle design. Comput. Graph. Appl. IEEE 17(2), 13 (1997)

    Article  Google Scholar 

  23. Kan, H., Duffy, V.G., Su, C.J.: An Internet virtual reality collaborative environment for effective product design. Comput. Ind. 45(2), 197 (2001)

    Article  Google Scholar 

  24. Szalavári, Z., Schmalstieg, D., Fuhrmann, A., Gervautz, M.: Studierstube: an environment for collaboration in augmented reality. Virtual Real. 3(1), 37 (1998)

    Article  Google Scholar 

  25. Angster, S.R., Jayaram, S.: Vedam: virtual environments for design and manufacturing. Ph.D. thesis, Washington State University Pullman, WA (1996)

  26. Marks, S., Estevez, J.E., Connor, A.M.: Towards the Holodeck: fully immersive virtual reality visualisation of scientific and engineering data. In: Proceedings of the 29th International Conference on Image and Vision Computing New Zealand, p. 42. ACM (2014)

  27. Weidlich, D., Cser, L., Polzin, T., Cristiano, D., Zickner, H.: Virtual reality approaches for immersive design. CIRP Ann. Manuf. Technol. 56(1), 139 (2007)

    Article  Google Scholar 

  28. Li, B., Lou, R., Segonds, F., Merienne, F.: Multi-user interface for co-located real-time work with digital mock-up: a way to foster collaboration? Int. J. Interact. Des. Manuf. 1–13 (2016). doi:10.1007/s12008-016-0335-2

  29. Valentini, P.P., Pezzuti, E.: Accuracy in fingertip tracking using Leap Motion controller for interactive virtual applications. Int. J. Interact. Des. Manuf. 1–10 (2016). doi:10.1007/s12008-016-0339-y

  30. Arroyave-Tobón, S., Osorio-Gómez, G.: Ergonomic analysis in conceptual design stage using a gesture-based modelling tool. Int. J. Interact. Des. Manuf. 1–8 (2015). doi:10.1007/s12008-015-0289-9

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Brigham Young University, Provo, UT, 84602, USA

    Ian Freeman, John Salmon & Joshua Coburn

Authors
  1. Ian Freeman
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. John Salmon
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Joshua Coburn
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to John Salmon.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (csv 2 KB)

Supplementary material 2 (csv 15 KB)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Freeman, I., Salmon, J. & Coburn, J. A bi-directional interface for improved interaction with engineering models in virtual reality design reviews. Int J Interact Des Manuf 12, 549–560 (2018). https://doi.org/10.1007/s12008-017-0413-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12008-017-0413-0

Keywords

Search

Navigation