Skip to main content

Advertisement

Log in

Thermal and photocuring of an acrylate-based coating resin reinforced with nanosilica particles

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

A macromonomer, 1,3-bis[(2-hydroxy-3-acrylate)propyloxy]2-hydroxypropane (BHAPP) was prepared by the reaction of acrylic acid with diglycerol diglycidyl ether (DGE) in the presence of triethyl amine as a catalyst. The progress of the reaction was followed by measuring the decrease in intensity of the epoxide absorption peak at 915 cm−1, and structure of BHAPP was characterized by FTIR and 1H NMR spectroscopy. The effect of nanosilica (NS) particles as catalyst on thermal and photocuring of BHAPP was studied. The photopolymerization was carried out with the visible light using camphorquinone and N,N-dimethylaminoethylmethacrylate (DMAEM) as the photoinitiating system. The kinetic parameters of thermal curing were obtained using nonisothermal differential scanning calorimeter (DSC), and the data indicated that NS particles catalyzed the cure reaction by shifting the exothermic peak toward lower temperatures, decreasing the activation energy (E a), and increasing the rate constant value. The absorption properties of the cured nanocomposites were also studied in different exposure conditions.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  1. Weiss, KD, “Paint and Coatings: A Mature Industry in Transition.” Prog. Polym. Sci., 22 203–245 (1997)

    Article  CAS  Google Scholar 

  2. Germinario, LT, Shang, PP, “Advances in Nano Thermal Analysis of Coatings.” J. Therm. Anal. Calorim., 93 207–211 (2008)

    Article  CAS  Google Scholar 

  3. Bayraktar, G, Guvener, B, Bural, C, Uresin, Y, “Influence of Polymerization Method, Curing Process, and Length of Time of Storage in Water on the Residual Methyl Methacrylate Content in Dental Acrylic Resins.” J. Biomed. Mater. Res. B Appl. Biomater., 76 340–345 (2006)

    Google Scholar 

  4. Urban, VM, Machado, AL, Vergani, CE, Giampaolo, ET, Pavarina, AC, Almeida, FG, Cass, QB, “Effect of Water-Bath Post-Polymerization on the Mechanical Properties, Degree of Conversion, and Leaching of Residual Compounds of Hard Chairside Reline Resins.” Dent. Mater., 25 662–671 (2009)

    Article  CAS  Google Scholar 

  5. Ghaemy, M, Heidaripour, M, Barghamadi, M, “Synthesis, Characterization, and Cure reaction of Methacrylate-Based Multifunctional Monomers for Dental Composites.” J. Appl. Polym. Sci., 106 1917–1923 (2007)

    Article  CAS  Google Scholar 

  6. Moszner, N, Salz, U, “New Developments of Polymeric Dental Composites.” Prog. Polym. Sci., 26 535–576 (2001)

    Article  CAS  Google Scholar 

  7. Esposito Corcione, C, Greco, A, Maffezzoli, A, “Photopolymerization Kinetics of an Epoxy Based Resin for Stereolithography Calorimetric Analysis.” J. Therm. Anal. Calorim., 72 687–693 (2003)

    Article  CAS  Google Scholar 

  8. Uhl, FM, Webster, DC, Davuluri, SP, Wong, SC, “UV Curable Epoxy Acrylate–Clay Nanocomposites.” Eur. Polym. J., 42 2596–2605 (2006)

    Article  CAS  Google Scholar 

  9. Chartoff, R, “Thermal Characteristics of Thermosets Formed by Free Radical Photocuring.” J. Therm. Anal. Calorim., 85 213–217 (2006)

    Article  CAS  Google Scholar 

  10. Tanaka, K, Taira, M, Shintani, H, Wakasa, K, Yamaki, M, “Residual Monomers (TEGDMA and Bis-GMA) of a Set Visible-Light-Cured Dental Composite Resin When Immersed in Water.” J. Oral Rehabil., 18 353–362 (1991)

    Article  CAS  Google Scholar 

  11. Shichang, L, Wei, Z, Song, L, Wenfang, S, “A Novel Method for Preparation of Exfoliated UV-Curable Polymer/Clay Nanocomposites.” Eur. Polym. J., 44 1613–1619 (2008)

    Article  Google Scholar 

  12. de Meijer, M, “Review on the Durability of Exterior Wood Coatings with Reduced VOC-Content.” Prog. Org. Coat., 43 217–225 (2001)

    Article  Google Scholar 

  13. Ghaemy, M, Amini Nasab, SM, Barghamadi, M, “Preparation and Nonisothermal Cure Kinetics of DGEBA-Nanosilica Particles Composites.” Polym. Compos., 29 165–172 (2008)

    Article  CAS  Google Scholar 

  14. Ohshima, T, Matsumoto, M, Miyata, T, Uragami, T, “Structural Design of P(BMA-co-VTES)/TEOS Hybrid Membranes for Removal of Benzene from Water by Pervaporation.” Macromol. Chem. Phys., 206 1638–1647 (2005)

    Article  CAS  Google Scholar 

  15. Rozenberg, BA, Tenne, R, “Polymer-Assisted Fabrication of Nanoparticles and Nanocomposites.” Prog. Polym. Sci., 33 40–112 (2008)

    Article  CAS  Google Scholar 

  16. Ghaemy, M, Amini Nasab, SM, Barghamadi, M, “Nonisothermal Cure Kinetics of Diglycidylether of Bisphenol-A/Amine System Reinforced with Nanosilica Particles.” J. Appl. Polym. Sci., 104 3855–3863 (2007)

    Article  CAS  Google Scholar 

  17. Karasu, F, Aydin, M, Kaya, MA, Balta, DK, Arsu, N, “Determination of Photoinitiated Polymerisation of Multifunctional Acrylates with Acetic Acid Derivatives of Thioxanthone by RT-FTIR.” Prog. Org. Coat., 64 1–4 (2009)

    Article  CAS  Google Scholar 

  18. Fouassier, JP, Allonas, X, “Photopolymerization Reactions Under Visible Lights: Principle, Mechanisms and Examples of Applications.” Prog. Org. Coat., 47 16–36 (2003)

    Article  CAS  Google Scholar 

  19. Kissinger, HE, “Reaction Kinetics in Differential Thermal Analysis.” Anal. Chem., 29 1702–1706 (1957)

    Article  CAS  Google Scholar 

  20. He, G, Riedl, B, Ait-Kadi, A, “Model-Free Kinetics: Curing Behavior of Phenol Formaldehyde Resins by Differential Scanning Calorimetry.” J. Appl. Polym. Sci., 87 433–440 (2003)

    Article  CAS  Google Scholar 

  21. Flynn, JH, Wall, LA, “A Quick, Direct Method for the Determination of Activation Energy from Thermogravimetric Data.” J. Polym. Sci. Part C: Polym. Lett., 4 323–328 (1966)

    CAS  Google Scholar 

  22. Ozawa, T, “Kinetic Analysis of Derivative Curves in Thermal Analysis.” J. Therm. Anal. Calorim., 2 301–324 (1970)

    Article  CAS  Google Scholar 

  23. Vyozovkin, S, Sbirrazzuoli, N, “Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers.” Macromol. Rapid Commun., 27 1515–1532 (2006)

    Article  Google Scholar 

  24. Zhou, TL, Gu, MY, Jin, YP, Wang, JX, “Isoconversional Method to Explore the Cure Reaction Mechanisms and Curing Kinetics of DGEBA/EMI-2,4/Nano-SiC System.” J. Polym. Sci. Part A Polym. Chem., 44 371–379 (2006)

    Article  CAS  Google Scholar 

  25. Braden, M, Causton, BE, Clarke, RL, “Diffusion in Water in Composite Filling Materials.” J. Dent. Res., 55 730–732 (1976)

    Article  CAS  Google Scholar 

  26. Sideridou, I, Achilias, DS, Spyroudi, C, Karabela, M, “Water Sorption Characteristics of Light-Cured Dental Resins and Composites Based on Bis-EMA/PCDMA.” Biomaterials, 25 367–376 (2004)

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mousa Ghaemy.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Ghaemy, M., Bekhradnia, S. Thermal and photocuring of an acrylate-based coating resin reinforced with nanosilica particles. J Coat Technol Res 9, 569–578 (2012). https://doi.org/10.1007/s11998-012-9401-2

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-012-9401-2

Keywords

Navigation