Skip to main content
Log in

Top coating of low-molecular weight polymer MALPB used for enhanced protection on anodized AZ31B Mg alloys

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

A protective composite coating on an AZ31B magnesium alloy was prepared by anodic oxidation to form an oxide layer, followed by single immersion in maleic anhydride-g-liquid polybutadiene (MALPB) solution to cover a polymer coating on top. As a low-molecular weight polymer with low viscosity, MALPB had a tendency to infiltrate into the pores and cracks in the anodic layer to fill the defects among oxides so that a compact layer could be formed after it was cured by its hardeners, as observed by scanning electron microscopy (SEM). This compact layer, which was composed of anodic oxides integrated with solidified MALPB, possessed thickness around 0.7 μm as detected by energy dispersive X-ray (EDX). The anodized, MALPB-coated AZ31B alloy exhibited enhancement in corrosion resistance superior to that separately coated by anodizing oxides or MALPB, as reflected by its much higher corrosion potentials (E ccor) and lower corrosion current density (i corr) in DC polarization tests. Based on electrochemical impedance spectroscopy (EIS) data, we conclude that the anticorrosive performance of the composite coating can be attributed to the barrier effects provided by different layers when the electrolyte passed through the MALPB layer, compact layer, and then the inner anodic layer before it reached the surface of Mg alloy, and that among them, the compact layer acted as a much more effective barrier to the electrolyte. The appearance of damaged areas on the composite coating surface after a much longer duration in a salt spray environment revealed that the life-span of the AZ31B Mg alloy could be greatly prolonged if the pores and cracks on the anodizing films were properly sealed by suitable polymers.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Zhao, M, Wu, SS, An, P, Luo, JR, Fukuda, Y, Nakae, H, “Microstructure and Corrosion Resistance of a Chromium-Free Multi-Elements Complex Coating on AZ91D Magnesium Alloy.” Mater. Chem. Phys., 99 (1) 54–60 (2006)

    Article  CAS  Google Scholar 

  2. Zhao, H, Huang, ZH, Cui, JZ, “A Novel Method of Electroless Plating on AZ31 Magnesium Alloy Sheet.” J. Mater. Process. Technol., 203 (1–3) 310–314 (2008)

    Article  CAS  Google Scholar 

  3. Gray, JE, Luan, B, “Protective Coatings on Magnesium and Its Alloys—A Critical Review.” J. Alloys Compd., 336 (1–2) 88–113 (2002)

    Article  CAS  Google Scholar 

  4. Liu, JR, Guo, YN, Huang, WD, “Study on the Corrosion Resistance of Phytic Acid Conversion Coating for Magnesium Alloys.” Surf. Coat. Technol., 201 (3–4) 1536–1541 (2006)

    CAS  Google Scholar 

  5. Guo, HF, An, MZ, Xu, S, Huo, HB, “Microarc Oxidation of Corrosion Resistant Ceramic Coating on a Magnesium Alloy.” Mater. Lett., 60 (12) 1538–1541 (2006)

    Article  CAS  Google Scholar 

  6. Hollstein, F, Weidemann, R, Scholz, J, “Characteristics of PVD-Coatings on AZ31hp Magnesium Alloys.” Surf. Coat. Technol., 162 (2–3) 261–268 (2003)

    Article  CAS  Google Scholar 

  7. Mondal, AK, Kumar, S, Blawert, C, Dahotre, NB, “Effect of Laser Surface Treatment on Corrosion and Wear Resistance of ACM720 Mg Alloy.” Surf. Coat. Technol., 202 (14) 3187–3198 (2008)

  8. Tian, XB, Wei, CB, Yang, SQ, Fu, RKY, Chu, PK, “Water Plasma Implantation/Oxidation of Magnesium Alloys for Corrosion Resistance.” Nucl. Instr. Meth. Phys. Res. B, 242 (1–2) 300–302 (2006)

    Article  CAS  ADS  Google Scholar 

  9. Shi, ZM, Song, GL, Atrens, A, “The Corrosion Performance of Anodized Magnesium Alloys.” Corros. Sci., 48 (11) 3531–3546 (2006)

    Article  CAS  Google Scholar 

  10. Zhang, YJ, Yan, CW, Wang, FH, Lou, HY, Cao, CN, “Study on the Environmentally Friendly Anodizing of AZ91D Magnesium Alloy.” Surf. Coat. Technol., 161 (1) 36–43 (2002)

    Article  CAS  Google Scholar 

  11. Arrabal, R, Matykina, E, Viejo, F, Skeldon, P, Thompson, GE, “Corrosion Resistance of WE43 and AZ91D Magnesium Alloys with Phosphate PEO Coatings.” Corros. Sci., 50 (6) 1744–1752 (2008)

    Article  CAS  Google Scholar 

  12. Mizutani, Y, Kim, SJ, Ichino, R, Okido, M, “Anodizing of Mg Alloys in Alkaline Solutions.” Surf. Coat. Technol., 169–170 (2) 143–146 (2003)

    Article  Google Scholar 

  13. Guo, XW, Ding, WJ, Lu, C, Zhai, CQ, “Influence of Ultrasonic Power on the Structure and Composition of Anodizing Coatings Formed on Mg Alloys.” Surf. Coat. Technol., 183 (2–3) 359–368 (2004)

    Article  CAS  Google Scholar 

  14. Wu, CS, Zhang, Z, Cao, FH, Zhang, LJ, Zhang, JQ, Cao, CN, “Study on the Anodizing of AZ31 Magnesium Alloys in Alkaline Borate Solutions.” Appl. Surf. Sci., 253 (8) 3893–3898 (2007)

    Article  CAS  ADS  Google Scholar 

  15. Guo, Y, Wang, GX, Dong, GJ, Gong, F, Zhang, L, Zhang, ML, “Corrosion Resistance of Anodized AZ31 Mg Alloy in Borate Solution Containing Titania Sol.” J. Alloys Compd., 463 (1–2) 458–461 (2008)

    Google Scholar 

  16. Cheng, IC, Fu, EG, Liu, LD, Lee, CY, Lin, CS, “Effect of Fluorine Anions on Anodizing Behavior of AZ91 Magnesium Alloy in Alkaline Solutions.” J. Electrochem. Soc., 155 (5) C219–C225 (2008)

    Article  CAS  Google Scholar 

  17. Wang, WM, Zhu, LO, Liu, HC, Li, WP, “Influence of Surface Pretreatment on the Anodizing Film of Mg Alloy and the Mechanism of the Ultrasound During the Pretreatment.” Surf. Coat. Technol., 202 (17) 4210–4217 (2008)

    Article  CAS  Google Scholar 

  18. Hsiao, HY, Chung, P, Tsai, WT, “Baking Treatment Effect on Materials Characteristics and Electrochemical Behavior of Anodic Film Formed on AZ91D Magnesium Alloy.” Corros. Sci., 49 (2) 781–793 (2007)

    Article  CAS  Google Scholar 

  19. Kannan, MB, Gomes, D, Dietzel, W, Abetz, V, “Polyoxadiazole-Based Coating for Corrosion Protection of Magnesium Alloy.” Surf. Coat. Technol., 202 (19) 4598–4601 (2008)

    Article  CAS  Google Scholar 

  20. Kang, Z, Sang, J, Shao, M, Li, Y, “Polymer Plating on AZ31 Magnesium Alloy Surface and Film Evaluation of Corrosion Property.” J. Mater. Process. Technol., 209 (9) 4590–4594 (2009)

    Article  CAS  Google Scholar 

  21. Truong, VT, Lai, PK, Moore, BT, Muscat, RF, Russo, MS, “Corrosion Protection of Magnesium by Electroactive Polypyrrole/Paint Coatings.” Synth. Met., 110 (1) 7–15 (2000)

    Article  CAS  Google Scholar 

  22. Yfantis, AY, Paloumpa, I, Schmeizer, D, Yfantis, D, “Novel Corrosion-Resistant Films for Mg Alloys.” Surf. Coat. Technol., 151–152 (4) 400–404 (2002)

    Article  Google Scholar 

  23. Sathiyanarayanan, S, Azim, SS, Venkatachari, G, “Corrosion Resistant Properties of Polyaniline–Acrylic Coating on Magnesium Alloy.” Appl. Surf. Sci., 253 (4) 2113–2117 (2006)

    Article  CAS  ADS  Google Scholar 

  24. Khramov, AN, Balbyshev, VN, Kasten, LS, Mantz, RA, “Sol–Gel Coatings with Phosphonate Functionalities for Surface Modification of Magnesium Alloy.” Thin Solid Films, 514 (1–2) 174–181 (2006)

    Article  CAS  ADS  Google Scholar 

  25. Lamaka, SV, Montemorc, MF, Galio, AF, Zheludkevich, ML, Trindade, C, Dick, LF, Ferreira, MGS, “Novel Hybrid Sol–Gel Coatings for Corrosion Protection of AZ31B Magnesium Alloy.” Electrochim. Acta, 53 (14) 4773–4783 (2008)

    Article  CAS  Google Scholar 

  26. Rateick, RG, Xi, SJ, Birss, VI, “Sealing Methods for Enhanced Corrosion Protection of Anodized Magnesium Alloy WE43A-T6.” Magnesium Technology 2002 Symposium Held at the 2002 TMS Annual Meeting, Seattle, WA, Feb 2002

  27. Mori, K, Hirahara, H, Oishi, Y, Kumagai, N, “Effect of Triazine Dithiols on the Polymer Plating of Magnesium Alloys.” International Workshop on Magnesium Platform Science and Technology, Nagaoka, Japon, July 2000

  28. Mori, K, Kang, ZX, Oravec, J, Oishi, Y, “Corrosion Resistance of Polymer-Plated Magnesium Alloys.” 2nd International Conference on Platform Science and Technology for Advanced Magnesium Alloys, Osaka, Japan, Jan 2003

  29. Kang, ZX, Li, YY, Mori, K, “Application of Polymer Plating to Inhibit Corrosion of Magnesium Alloy.” International Conference on Magnesium-Science, Technology and Applications, Beijing, China, Sep 2004

  30. Herrera-Hernandez, H, Vargas-Garcia, JR, Hallen-Lopez, JM, Mansfeld, F, “Evaluation of Different Sealing Methods for Anodized Aluminum–Silicon Carbide (Al/SiC) Composites Using EIS and SEM Techniques.” Mater. Corros., 58 (11) 825–832 (2007)

    Article  CAS  Google Scholar 

  31. Tang, JW, Wang, JW, He, YD, Tong, ZS, Shen, ZS, Li, XG, Li, BX, “Corrosion Protection of Galvanized Sheet by Maleic Anhydride-g-Liquid Polybutadiene Environmental Friendly Coatings.” Prog. Org. Coat., 63 (2) 195–200 (2008)

    Article  CAS  Google Scholar 

  32. Wang, JW, Chen, L, He, YD, “Preparation of Environmental Friendly Coatings Based on Natural Shellac Modified by Diamine and Its Applications for Copper Protection.” Prog. Org. Coat., 62 (3) 307–312 (2008)

    Article  CAS  Google Scholar 

  33. Guo, HF, An, MZ, Xu, S, Huo, HB, “Formation of Oxygen Bubbles and Its Influence on Current Efficiency in Micro-Arc Oxidation Process of AZ91D Magnesium Alloy.” Thin Solid Films, 485 (1–2) 53–58 (2005)

    Article  CAS  ADS  Google Scholar 

  34. Zhu, YF, Lu, HM, Jiang, Q, Mimura, K, Isshiki, M, “Effect of Alloying Mg on Corrosion Resistance of Cu at High Temperature.” Electrochem. Soc., 154 (3) C153–C158 (2007)

    Article  CAS  Google Scholar 

  35. Zhang, CH, Huang, XM, Zhang, ML, Gao, LL, Wu, RZ, “Electrochemical Characterization of the Corrosion of a Mg–Li Alloy.” Mater. Lett., 62 (14) 2177–2180 (2008)

    Article  Google Scholar 

  36. Wang, XM, Zhu, LQ, Liu, HC, Li, WP, “Influence of Surface Pretreatment on the Anodizing Film of Mg Alloy and the Mechanism of the Ultrasound During the Pretreatment.” Surf. Coat. Technol., 202 (17) 4210–4217 (2008)

    Article  CAS  Google Scholar 

  37. Zucchi, F, Frignani, A, Grassi, V, Balbo, A, Trabanelli, G, “Organo-Silane Coatings for AZ31 Magnesium Alloy Corrosion Protection.” Mater. Chem. Phys., 110 (2–3) 263–268 (2008)

    Article  CAS  Google Scholar 

  38. Kannan, MB, Gomes, D, Dietzel, W, Abetz, V, “Polyoxadiazole-Based Coating for Corrosion Protection of Magnesium Alloy.” Surf. Coat. Technol., 202 (19) 4598–4601 (2008)

    Article  CAS  Google Scholar 

  39. Duan, HP, Du, KQ, Yan, CW, Wang, FH, “Electrochemical Corrosion Behavior of Composite Coatings of Sealed MAO Film on Magnesium Alloy AZ91D.” Electrochim. Acta, 51 (14) 2898–2908 (2006)

    Article  CAS  Google Scholar 

  40. Mansfeld, F, “Electrochemical Impedance Spectroscopy (EIS) as a New Tool for Investigating Methods of Corrosion Protection.” Electrochim. Acta, 35 (10) 1533–1544 (1990)

    Article  CAS  Google Scholar 

  41. Chung, SC, Cheng, JR, Chiou, SD, “EIS Behavior of Anodized Zinc in Chloride Environments.” Corros. Sci., 42 (7) 1249–1268 (2000)

    Article  CAS  Google Scholar 

  42. Ghasemi, A, Raja, VS, Blawert, C, Dietzel, W, Kainer, KU, “Study of the Structure and Corrosion Behavior of PEO Coatings on AM50 Magnesium Alloy by Electrochemical Impedance Spectroscopy.” Surf. Coat. Technol., 202 (15) 3513–3518 (2008)

    Article  CAS  Google Scholar 

  43. Tepe, B, Gunay, B, “Evaluation of Pre-treatment Processes for HRS (Hot Rolled Steel) in Powder Coating.” Prog. Org. Coat., 62 (2) 134–144 (2008)

    CAS  Google Scholar 

  44. Poznyak, SK, Zheludkevich, ML, Raps, D, Gammel, F, Yasakau, KA, Ferreira, MGS, “Preparation and Corrosion Protective Properties of Nanostructured Titania-Containing Hybrid Sol–Gel Coatings on AA2024.” Prog. Org. Coat., 62 (2) 226–235 (2008)

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jinwei Wang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wang, J., Tang, J. & He, Y. Top coating of low-molecular weight polymer MALPB used for enhanced protection on anodized AZ31B Mg alloys. J Coat Technol Res 7, 737–746 (2010). https://doi.org/10.1007/s11998-010-9258-1

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-010-9258-1

Keywords

Navigation