Abstract
The thermodynamic description of the Mg-Al-Ca-Sr quaternary system in the magnesium-rich region was developed on the basis of the authors’ previous work on the key constituent ternaries, such as Mg-Al-Ca and Mg-Al-Sr systems. Using this description coupled with the Scheil model, the calculated solidification paths of several Mg-Al-Sr ternary alloys and Mg-Al-Ca-Sr quaternary alloys are in good accordance with experimental results from directional solidification as well as published results from cast alloys. These results validate the reliability of the present thermodynamic description of the Mg-Al-Ca-Sr quaternary system in the magnesium-rich region. More importantly, the predicative nature of the calculation either using only thermodynamic data or coupled with the kinetic model makes it possible to exploit new alloy compositions where experimental investigation has not been attempted.
Similar content being viewed by others
References
E. Baril, P. Labelle, and M.O. Pekguleryuz, JOM, 55(11) (2003), pp. 34–39.
M.O. Pekguleryuz and A.A. Kaya, Magnesium Alloys and Their Applications, ed. K.U. Kainer (Weinheim, Germany: Wiley-VCH Verlag GmbH, 2003), pp. 74–93.
E. Baril and P. Labelle, “Magnesium for Automotive Components” (SP-1845), SAE Technical Paper Series, 2004-01-0659 (Warrendale, PA: SAE International, 2004).
A.A. Luo, Int. Mater. Rev., 49 (2004), pp. 13–29.
Y. Nakaura, A. Watanabe, and K. Ohori, Mater Trans, 47(4) (2006), pp. 1031–1039.
A.A. Luo, M.P. Balogh, and B.R. Powell, Metall Mater Trans. A, 33 (2002), pp. 567–574.
H. Cao et al., Z. Metallk., 97 (2006), pp. 422–428.
H. Cao et al., Acta Mater., 56(18) (2008), pp. 5245–5254.
H. Cao et al., Scripta Mater., 58(5) (2008), pp. 397–400.
K.C. Chou and Y.A. Chang, Bunsenges Ber. Phys. Chem., 93 (1989), pp. 735–741.
Pandat 7.0-Phase Diagram Calculation Software for Multi-component Systems, Computherm LLC, 437 S. Yellowstone Dr., Suite 217, Madison, WI, 53719, USA (2007).
M.C. Flemings, Solidification Processing (New York: McGraw-Hill, 1974).
X.Y. Yan et al., Acta Mater., 50 (2002), pp. 2199–2207.
C. Zhang et al., Magnesium Technology 2006, ed. A.A Luo, N.R. Neelameggham and R.S. Beals (Warrendale, PA: TMS, 2006), pp. 45–50.
C. Zhang et al., Intermetallics, 15 (2007), pp. 1395–1400.
A. Suzuki, Metall. Mater. Trans. A, 38 (2007), pp. 420–427.
H. Cao et al., Magnesium Technology 2008, ed. M.O. Pekguleryuz et al. (Warrendale, PA: TMS, 2008), pp. 101–104.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, C., Cao, H.B., Cao, G.P. et al. The solidification of magnesium-rich alloys containing Al, Ca, and Sr. JOM 60, 48–51 (2008). https://doi.org/10.1007/s11837-008-0166-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-008-0166-0