Abstract
Slag foaming under dynamic conditions has been studied in laboratory scale to examine the influence of properties commonly used to describe the foaminess and foam stability of slags under steady-state conditions. Synthetically produced slags with compositions relevant to tool steel and stainless steel production were studied through X-ray equipment in measurements simulating the dynamic conditions found in real processes. It is found that the dynamic systems display a more complex behavior than systems under steady state. Traditional theories for foaming do not seem to be valid for slag foaming under dynamic conditions. The foam displays a fluctuating behavior, which the presently available models are not able to take into account. The concept of a foaming index does not seem to be applicable, resulting in the need for alternative models.
Similar content being viewed by others
References
J.H. Swisher and C.L. McCabe: Trans. TMS-AIME, 1964, vol. 230, pp. 1669–75.
K. Ito and R.J. Fruehan: Metall. Mater. Trans. B, 1989, vol. 20B, pp. 509–14.
K. Ito and R.J. Fruehan: Metall. Mater. Trans. B, 1989, vol. 20B, pp. 515–21.
R. Jiang and R.J. Fruehan: Metall. Mater. Trans. B, 1991, vol. 22B, pp. 481–89.
Y. Zhang and R.J. Freuhan: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 813–19.
S.-M. Jung and R.J. Fruehan: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 348–55.
H.S. Kim, D.J. Min, and J.H. Park: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 317–24.
K. Wu, S. Chu, W. Qian, and Q. Niu: Steel Res., 1999, vol. 70, pp. 248–51.
A.K. Lahiri, R. Yogambha, P. Dayal, and S. Seetharaman: Mills Symp.: Metal, Slags, Glasses: High Temperature Properties and Phenomena, Institute of Materials, London, 2002, vol. 2, pp. 231–38.
J.J. Bikerman: Foams: Theory and Industrial Applications, Reinhold Publishing Corporation, New York, NY, 1953, p. 37.
A.K. Lahiri and S. Seetharaman: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 499–502.
R.D. Morales, H. Rodriguez-Hernandez, A. Vargas-Zamora, and A.N. Conejo: Ironmaking and Steelmaking, 2003, vol. 29, pp. 445–53.
T. Iida: Mills Symp.: Metal, Slags, Glasses: High Temperature Properties and Phenomena, Institute of Materials, London, 2002, vol. 2, pp. 101–10.
S. Seetharaman, D. Sichen, and J.Y. Zhang: JOM, 1999, vol. 51, pp. 38–40.
K.C. Mills and S. Sridhar: Ironmaking and Steelmaking, 1999, vol. 26, pp. 262–68.
K.C. Mills, L. Chapman, A.B. Fox, and S. Sridhar: Scand. J. Metall., 2001, vol. 30, pp. 396–403.
Y. Ogawa, D. Huin, H. Gaye, and N. Tokumitsu: Iron Steel Inst. Jpn. Int., 1993, vol. 33, pp. 224–32.
J. Szekely: Rate Phenomena in Process Metallurgy, Wiley-Interscience, New York, NY, 1971, pp. 686 and 689–70.
S.A.K. Jeelani, S. Ramaswami, and S. Hartland: Chem. Eng. Res. Des., 1990, vol. 68, pp. 271–77.
S. Hartland and A.D. Barber: Trans. Inst. Chem. Eng., 1974, vol. 52, pp. 43–52.
Slag Atlas, 2nd ed., VDEh Verlag Stahleisen GmbH, Düsseldorf, Germany, 1995, pp. 438 and 441.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kapilashrami, A., Görnerup, M., Seetharaman, S. et al. Foaming of slags under dynamic conditions. Metall Mater Trans B 37, 109–117 (2006). https://doi.org/10.1007/s11663-006-0090-z
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11663-006-0090-z