Abstract
This paper provides an overview of technological challenges and recent advances in the liquid feed passive direct methanol fuel cells (DMFC). Important issues viz. species management, thermal management, methanol crossover, sluggish anode kinetics, durability and stability, and cost are discussed in detail. Methanol management, water management, oxygen management, and carbon dioxide management are covered under species management. The present technological status is given and future research directions are suggested.
Similar content being viewed by others
References
Kirubakaran A, Jain S, Nema RK (2009) A review on fuel cell technologies and power electronic interface. Renew Sustain Energy Rev 13:2430–2440
Stambouli AB (2011) Fuel cells: the expectations for an environmental-friendly and sustainable source of energy. Renew Sustain Energy Rev 15:4507–4520
Hart D (2000) Sustainable energy conversion: fuel cells—the competitive option? J Power Sources 86:23–27
Pollet BG, Staffell I, Shang JL (2012) Current status of hybrid, battery and fuel cell electric vehicles: from electrochemistry to market prospects. Electrochim Acta 84:235–249
Mekhilef S, Saidur R, Safari A (2012) Comparative study of different fuel cell technologies. Renew Sustain Energy Rev 16:981–989
Lucia U (2014) Overview on fuel cells. Renew Sustain Energy Rev 30:164–169
Spakovsky MR, Olsommer B (2002) Fuel cell systems and system modelling and analysis perspectives for fuel cell development. Energy Convers Manag 43:1249–1257
Sharaf OZ, Orhan MF (2014) An overview of fuel cell technology: fundamentals and applications. Renew Sustain Energy Rev 32:810–853
Acres GJK (2001) Recent advances in fuel cell technology and its applications. J Power Sources 100:60–66
Shrivastava NK, Thombre SB, Wasewar KL (2014) A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell. Int J Green Energ. doi:10.1080/15435075.2014.916220
Douvartzides S, Coutelieris F, Tsiakaras P (2003) Energy and exergy analysis of a solid oxide fuel cell plant fueled by ethanol and methane. Ionics 9:293–296
Hu A, Zhou J, Chen B, Wu Y (2015) The effect of pressure gradient on anode micro modeling of solid oxide fuel cell. Ionics 21:2005–2017
Giddey S, Ciacchi FT, Badwal SPS (2005) Fuel quality and operational issues for polymer electrolyte membrane (PEM) fuel cells. Ionics 11:1–10
Nachiappan N, ParuthimalKalaignan G, Sasikumar G (2013) Effect of nitrogen and carbon dioxide as fuel impurities on PEM fuel cell performances. Ionics 19:351–354
Padmavathi R, Sangeetha D (2013) Design of novel SPEEK-based proton exchange membranes by self-assembly method for fuel cells. Ionics 19:1423–1436
Demirci UB (2007) Direct liquid-feed fuel cells: thermodynamic and environmental concerns. J Power Sources 169:239–246
Qian W, Wilkinson DP, Shen J, Wang H, Zhang J (2006) Architecture for portable direct liquid fuel cells. J Power Sources 154:202–213
Jayakumar A, Sethu S, Ramos M, Robertson J, Al-Jumaily A (2015) A technical review on gas diffusion, mechanism and medium of PEM fuel cell. Ionics 21:1–18
Lamy C, Lima A, LeRhun V, Delime F, Coutanceau C, Leger JM (2002) Recent advances in the development of direct alcohol fuel cells (DAFC). J Power Sources 105:283–296
Kim J, Choi K, Kang S, Kim J (2011) Direct methanol fuel cell. US Patent 7939217 B2
Dine LLV, Maricle DL (1996) Direct methanol oxidation polymer electrolyte membrane power system. US Patent 5573866 A
Okamoto T (1998) Direct methanol type fuel cell. US Patent 5723228 A
Surampudi S, Frank HA, Narayanan SR, Chun W, Jeffries-Nakamura B, Kindler A, Halpert G (1998) Direct methanol feed fuel cell and system. US Patent 5773162 A
Luft G, Pantel K, Waidhas M (2003) Direct methanol fuel cell (DMFC). US Patent 6509112 B1
Kamaruddin MZF, Kamarudin SK, Masdar MS, Daud WRW (2015) Investigating design parameter effect on the methanol flux in the passive storage of a direct methanol fuel cell. Int J Hydrogen Energ. doi:10.1016/j.ijhydene.2015.06.071
Falcão DS, Pereira JP, Rangel CM, Pinto AMFR (2015) Development and performance analysis of a metallic passive micro-direct methanol fuel cell for portable applications. Int J Hydrog Energy 40:5408–5415
BahavanPalani P, Kannan R, Rajashabala S, Rajendran S, Velraj G (2015) Effect of nano-composite on polyvinyl alcohol-based proton conducting membrane for direct methanol fuel cell applications. Ionics 21:507–513
Birry L, Bock C, Xue X, McMillan R, MacDougall B (2009) DMFC electrode preparation, performance and proton conductivity measurements. J Appl Electrochem 39:347–360
Song SQ, Zhou WJ, Li WZ, Sun G, Xin Q, Kontou S, Tsiakaras P (2004) Direct methanol fuel cells: methanol crossover and its influence on single DMFC performance. Ionics 10:458–462
Nordlund J, Roessler A, Lindbergh G (2002) The influence of electrode morphology on the performance of a DMFC anode. J Appl Electrochem 32:259–265
Kamarudin SK, Achmad F, Daud WRW (2009) Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices. Int J Hydrogen Energy 34:6902–6916
Li X, Faghri A (2013) Review and advances of direct methanol fuel cells (DMFCs) part I: design, fabrication, and testing with high concentration methanol solutions. J Power Sources 226:223–240
Shrivastava NK, Thombre SB, Mallick RK (2014) Effect of diffusion layer compression on passive DMFC performance. Electrochim Acta 149:167–175
Shrivastava NK, Thombre SB, Wasewar KL (2013) Nonisothermal mathematical model for performance evaluation of passive direct methanol fuel cells. Journal of Energy Engineering 139:266–274
Mallick RK, Thombre SB, Shrivastava NK (2015) A critical review of the current collector for passive direct methanol fuel cells. J Power Sources 285:510–529
Hashemi R, Yousefi S, Faraji M (2015) Experimental studying of the effect of active area on the performance of passive direct methanol fuel cell. Ionics. doi:10.1007/s11581-015-1479-y
Yousefi S, Shakeri M, Sedighi K (2013) The effect of cell orientations and environmental conditions on the performance of a passive DMFC single cell. Ionics 19:1637–1647
Yousefi S, Zohoor M (2013) Investigating the effect of operating parameters on the open circuit voltage of a passive DMFC. Ionics 19:1195–1201
Yousefi S, Ganji DD (2012) Experimental investigation of a passive direct methanol fuel cell with 100 cm2 active areas. Electrochim Acta 85:693–699
Yousefi S, Zohoor M (2014) Conceptual design and statistical overview on the design of a passive DMFC single cell. Int J Hydrogen Energy 39:5972–5980
Scott K, Taama WM, Argyropoulos P (1999) Engineering aspects of the direct methanol fuel cell system. J Power Sources 79:43–59
Yuan W, Zhou B, Deng J, Tang Y, Zhang Z, Li Z (2014) Overview on the developments of vapor-feed direct methanol fuel cells. Int J Hydrogen Energy 39:6689–6704
Faghri A, Li X, Bahrami H (2012) Recent advances in passive and semi passive direct methanol fuel cells. Int J Thermal Sciences 62:12–18
Chen R, Zhao TS, Yang WW, Xu C (2008) Two-dimensional two-phase thermal model for passive direct methanol fuel cells. J Power Sources 175:276–287
Achmad F, Kamarudin SK, Daud WRW, Majlan EH (2011) Passive direct methanol fuel cells for portable electronic devices. Applied Energy 88:1681–1689
Shrivastava NK, Thombre SB, Motghare RV (2014) Wire mesh current collectors for passive direct methanol fuel cells. J Power Sources 272:629–638
Tsujiguchi T, Abdelkareem MA, Kudo T, Nakagawa N, Shimizu T, Matsuda M (2010) Development of a passive direct methanol fuel cell stack for high methanol concentration. J Power Sources 195:5975–5979
Abdelkareem MA, Yoshitoshi T, Tsujiguchi T, Nakagawa N (2010) Vertical operation of passive direct methanol fuel cell employing a porous carbon plate. J Power Sources 195:1821–1828
Li X, Faghri A, Xu C (2010) Water management of the DMFC passively fed with a high-concentration methanol solution. Int J Hydrogen Energy 35:8690–8698
Nakagawa N, Abdelkareem MA, Sekimoto K (2006) Control of methanol transport and separation in a DMFC with a porous support. J Power Sources 160:105–115
Abdelkareem MA, Nakagawa N (2006) DMFC employing a porous plate for an efficient operation at high methanol concentrations. J Power Sources 162:114–123
Wu QX, Zhao TS, Chen R, Yang WW (2010) A micro fluidic-structured flow field for passive direct methanol fuel cells operating with highly concentrated fuels. J Micromech Microeng 20:0450141–0450149
Park YC, Kim DH, Lim S, Kim SK, Peck DH, Jung DH (2012) Design of a MEA with multi-layer electrodes for high concentration methanol DMFCs. Int J Hydrogen Energy 37:4717–4727
Yuan W, Tang Y, Yang X, Wan Z (2012) Toward using porous metal-fiber sintered plate as anodic methanol barrier in a passive direct methanol fuel cell. Int J Hydrogen Energy 37:13510–13521
Yuan W, Tang Y, Yang X (2013) High-concentration operation of a passive air-breathing direct methanol fuel cell integrated with a porous methanol barrier. Renew Energy 50:741–746
Yuan W, Deng J, Zhang Z, Yang X, Tang Y (2014) Study on operational aspects of a passive direct methanol fuel cell incorporating an anodic methanol barrier. Renew Energy 62:640–648
Rice J, Faghri A (2008) Thermal and start-up characteristics of a miniature passive liquid feed DMFC system, including continuous/discontinuous phase limitations. J Heat Transfer 130:6200101–6200111
Prakash S, Mustain W, Kohl PA (2008) Carbon dioxide vent for direct methanol fuel cells. J Power Sources 185:392–400
Prakash S, Kohl PA (2009) Performance of carbon dioxide vent for direct methanol fuel cells. J Power Sources 192:429–434
Liu JG, Zhao TS, Chen R, Wong CW (2005) The effect of methanol concentration on the performance of a passive DMFC. Electrochem Commun 7:288–294
Xu C, Faghri A, Li X, Ward T (2010) Methanol and water crossover in a passive liquid-feed direct methanol fuel cell. Int J Hydrogen Energy 35:1769–1777
Lai QZ, Yin GP, Wang ZB, Du CY, Zuo PJ, Cheng XQ (2008) Influence of methanol crossover on the fuel utilization of passive direct methanol fuel cell. Fuel Cells 8:399–403
Jewett G, Faghri A, Xiao B (2009) Optimization of water and air management systems for a passive direct methanol fuel cell. Int J Heat and Mass Transfer 52:3564–3575
Rice J, Faghri A (2006) A transient, multi-phase and multi-component model of a new passive DMFC. Int J Heat and Mass Transfer 49:4804–4820
Liu JG, Zhao TS, Liang ZX, Chen R (2006) Effect of membrane thickness on the performance and efficiency of passive direct methanol fuel cells. J Power Sources 153:61–67
Chen R, Zhao TS (2007) Porous current collectors for passive direct methanol fuel cells. Electrochim Acta 52:4317–4324
Gholami O, Imen SJ, Shakeri M (2013) Effect of non-uniform parallel channel on performance of passive direct methanol fuel cell. Int J Hydrogen Energy 38:3395–3400
Chen M, Chen J, Li Y, Huang Q, Zhang H, Xue X, Zou Z, Yang H (2012) Cathode catalyst layer with stepwise hydrophobicity distribution for a passive direct methanol fuel cell. Energy Fuel 26:1178–1184
Wang Z, Zhang X, Nie L, Zhang Y, Liu X (2014) Elimination of water flooding of cathode current collector of micro passive direct methanol fuel cell by superhydrophilic surface treatment. Applied Energy 126:107–112
Hashim N, Kamarudin SK, Daud WRW (2009) Design, fabrication and testing of a PMMA-based passive single-cell and a multi-cell stack micro-DMFC. Int J Hydrogen Energy 34:8263–8269
Lai QZ, Yin GP, Zhang J, Wang ZB, Cai KD, Liu P (2008) Influence of cathode oxygen transport on the discharging time of passive DMFC. J Power Sources 175:458–463
Chan YH, Zhao TS, Chen R, Xu C (2008) A small mono-polar direct methanol fuel cell stack with passive operation. J Power Sources 178:118–124
Guo H, Chen YP, Xue YQ, Ye F, Ma CF (2013) Three-dimensional transient modeling and analysis of two-phase mass transfer in air-breathing cathode of a fuel cell. Int J Hydrogen Energy 38:11028–11037
Bahrami H, Faghri A (2010) Transport phenomena in a semi-passive direct methanol fuel cell. Int J Heat and Mass Transfer 53:2563–2578
Zhao TS, Xu C, Chen R, Yang WW (2009) Mass transport phenomena in direct methanol fuel cells. Int J Hydrog Energy 35:275–292
Xu C, Faghri A (2010) Water transport characteristics in a passive liquid-feed DMFC. Int J Heat Mass Transfer 53:1951–1966
Oliveira VB, Rangel CM, Pinto AMFR (2011) One-dimensional and non-isothermal model for a passive DMFC. J Power Sources 196:8973–8982
Yang WW, Zhao TS (2009) Numerical investigations of effect of membrane electrode assembly structure on water crossover in a liquid-feed direct methanol fuel cell. J Power Sources 188:433–446
Bahrami H, Faghri A (2013) Review and advances of direct methanol fuel cells: part II: modeling and numerical simulation. J Power Sources 230:303–320
Cao J, Chen M, Chen J, Wang S, Zou Z, Li Z, Akins DL, Yang H (2010) Double microporous layer cathode for membrane electrode assembly of passive direct methanol fuel cells. Int J Hydrog Energy 35:4622–4629
Jewett G, Guo Z, Faghri A (2007) Water and air management systems for a passive direct methanol fuel cell. J Power Sources 168:434–446
Kim HK, Oh JM, Kim JH, Chang H (2006) Membrane electrode assembly for passive direct methanol fuel cells. J Power Sources 162:497–501
Cao J, Wang L, Song L, Xu J, Wang H, Chen Z, Huang Q, Yang H (2014) Novel cathodal diffusion layer with mesoporous carbon for the passive direct methanol fuel cell. Electrochim Acta 118:163–168
Chen M, Wang S, Zou Z, Yuan T, Li Z, Akins DL, Yang H (2010) Fluorination of Vulcan XC-72R for cathodic microporous layer of passive micro direct methanol fuel cell. J Appl Electrochem 40:2117–2124
Peled E, Blum A, Aharon A, Philosoph M, Lavi Y (2003) Novel approach to recycling water and reducing water loss in DMFCs. Electrochemical and Solid-State Letters 6:268–271
Xue YQ, Guo H, Shang HH, Ye F, Ma CF (2015) Simulation of mass transfer in a passive direct methanol fuel cell cathode with perforated current collector. Energy 81:501–510
Chen R, Zhao TS (2007) A novel electrode architecture for passive direct methanol fuel cells. Electrochem Commun 9:718–724
Reshetenko TV, Kim HT, Kweon HJ (2007) Cathode structure optimization for air-breathing DMFC by application of pore-forming agents. J Power Sources 171:433–440
Chetty R, Scott K, Kundu S, Muhler M (2010) Optimization of mesh-based anodes for direct methanol fuel cells. Journal of Fuel Cell Science and Technology 7:310111–310119
Kim D, Cho EA, Hong SA, Oh IH, Ha HY (2004) Recent progress in passive direct methanol fuel cells at KIST. J Power Sources 130:172–177
Lundin MD, McCready MJ (2011) High pressure anode operation of direct methanol fuel cells for carbon dioxide management. J Power Sources 196:5583–5590
Yuan W, Tang Y, Yang X, Liu B, Wan Z (2012) Structural diversity and orientation dependence of a liquid-fed passive air-breathing direct methanol fuel cell. Int J Hydrog Energy 37:9298–9313
Yang WM, Chou SK, Shu C (2007) Effect of current-collector structure on performance of passive micro direct methanol fuel cell. J Power Sources 164:549–554
Chen R, Zhao TS, Liu JG (2006) Effect of cell orientation on the performance of passive direct methanol fuel cells. J Power Sources 157:351–357
Liu W, Cai W, Liu C, Sun S, Xing W (2015) Magnetic coupled passive direct methanol fuel cell: promoted CO2 removal and enhanced catalyst utilization. Fuel 139:308–313
Chen R, Zhao TS (2007) Performance characterization of passive direct methanol fuel cells. J Power Sources 167:455–460
Chen R, Zhao TS (2005) Mathematical modeling of a passive-feed DMFC with heat transfer effect. J Power Sources 152:122–130
Zhao TS, Chen R, Yang WW, Xu C (2009) Small direct methanol fuel cells with passive supply of reactants. J Power Sources 191:185–202
Wang L, Zhang Y, An Z, Huang S, Zhou Z, Liu X (2013) Non-isothermal modeling of a small passive direct methanol fuel cell in vertical operation with anode natural convection effect. Energy 58:283–295
Xiao B, Faghri A (2008) Transient modeling and analysis of a passive liquid-feed DMFC. Int J Heat and Mass Transfer 51:3127–3143
Guo Z, Faghri A (2008) Development of a 1 W passive DMFC. Int Communications in Heat and Mass Transfer 35:225–239
Bahrami H, Faghri A (2011) Exergy analysis of a passive direct methanol fuel cell. J Power Sources 196:1191–1204
Kho BK, Bae B, Scibioh MA, Lee J, Ha HY (2005) On the consequences of methanol crossover in passive air-breathing direct methanol fuel cells. J Power Sources 142:50–55
Basri S, Kamarudin SK, Daud WRW, Yaakub Z, Ahmad MM, Hashim N, Hasran UA (2009) Unsteady-state modelling for a passive liquid-feed DMFC. Int J Hydrog Energy 34:5759–5769
Gholami O, JavadImen S, Shakeri M (2015) Effect of anode and cathode flow field geometry on passive direct methanol fuel cell performance. ElectrochimicaActa 158:410–417
Paust N, Krumbholz S, Munt S, Muller C, Koltay P, Zengerle R, Ziegler C (2009) Self-regulating passive fuel supply for small direct methanol fuel cells operating in all orientations. J Power Sources 192:442–450
Shimizu T, Momma T, Mohamedi M, Osaka T, Sarangapani S (2004) Design and fabrication of pumpless small direct methanol fuel cells for portable applications. J Power Sources 137:277–283
Amani M, Kazemeini M, Hamedanian M, Pahlavanzadeh H, Gharibi H (2015) Investigation of methanol oxidation on a highly active and stable Pt–Sn electrocatalyst supported on carbon–polyaniline composite for application in a passive direct methanol fuel cell. Mater Res Bull 68:166–178
Chang J, Feng L, Liu C, Xing W, Hu X (2014) Ni2P enhances the activity and durability of the Pt anode catalyst in direct methanol fuel cells. Energy & Environmental Science 7:628–1632
Gharibi H, Golmohammadi F, Kheirmand M (2013) Fabrication of MEA based on optimum amount of Co in PdxCo/C alloy nanoparticles as a new cathode for oxygen reduction reaction in passive direct methanol fuel cells. Electrochim Acta 89:212–221
Antolini E, Salgado JRC, Santos LGRA, Garcia G, Ticianelli EA, Pastor E, Gonzalez ER (2006) Carbon supported Pt–Cr alloys as oxygen-reduction catalysts for direct methanol fuel cells. J Appl Electrochem 36:355–362
Luna AMC, Bonesi A, Triaca WE, Baglio V, Antonucci V, Arico AS (2008) Pt–Fe cathode catalysts to improve the oxygen reduction reaction and methanol tolerance in direct methanol fuel cells. Journal of Solid State Electrochemistry 12:643–649
Hogarth MP, Ralph TR (2002) Catalysis for low temperature fuel cells part III: challenges for the direct methanol fuel cell. Platinum Metals Review 46:146–164
Karim NA, Kamarudin SK (2013) An overview on non-platinum cathode catalysts for direct methanol fuel cell. Applied Energy 103:212–220
Asteazaran M, Cespedes G, Moreno MS, Bengió S, Castro Lun AM (2015) Searching for suitable catalysts for a passive direct methanol fuel cell cathode. Int J Hydrogen Energ. doi:10.1016/j.ijhydene.2015.05.134
Lee K, Savadogo O, Ishihara A, Mitsushima S, Kamiya N, Ota K (2006) Methanol-tolerant oxygen reduction electrocatalysts based on Pd-3D transition metal alloys for direct methanol fuel cells. J Electrochem Soc 153:A20–A24
Mathiyarasuz J, Phani KLN (2007) Carbon-supported palladium-cobalt-noble metal (Au, Ag, Pt) nanocatalysts as methanol tolerant oxygen-reduction cathode materials in DMFCs. J Electrochem Soc 154:B1100–B1105
Nishantha KG, Sridhar P, Pitchumani S, Shukla AK (2011) A DMFC with methanol-tolerant-carbon-supported-Pt-Pd alloy cathode. J Electrochem Soc 158:B871–B876
Wen Z, Liu J, Li J (2008) Core/shell Pt/C nanoparticles embedded in mesoporous carbon as a methanol-tolerant cathode catalyst in direct methanol fuel cells. Adv Mater 20:743–747
Kima IT, Choia M, Leeb HK, Shim J (2013) Characterization of methanol-tolerant Pd–WO3 and Pd–SnO2 electrocatalysts for the oxygen reduction reaction in direct methanol fuel cells. Journal of Industrial and Engineering Chemistry 19:813–818
Lufrano F, Baglio V, Staiti P, Antonucci V, Arico AS (2013) Performance analysis of polymer electrolyte membranes for direct methanol fuel cells. J Power Sources 243:519–534
Ahmad H, Kamarudin SK, Hasran UA, Daud WRW (2010) Overview of hybrid membranes for direct-methanol fuel-cell applications. Int J Hydrog Energy 35:2160–2175
Neburchilov V, Martin J, Wang H, Zhang J (2007) A review of polymer electrolyte membranes for direct methanol fuel cells. J Power Sources 169:221–238
Wang Y, Chen KS, Mishler J, Cho SC, Adroher XC (2011) A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research. Applied Energy 88:981–1007
Rambabu G, Bhat SD (2014) Simultaneous tuning of methanol crossover and ionic conductivity of sPEEK membrane electrolyte by incorporation of PSSA functionalized MWCNTs: a comparative study in DMFCs. Chem Eng J 243:517–525
Diaz LA, Abuin GC, Corti HR (2012) Methanol sorption and permeability in Nafion and acid-doped PBI and ABPBI membranes. J Membr Sci 411–412:35–44
Yuan T, Pu L, Huang Q, Zhang H, Li X, Yang H (2014) An effective methanol-blocking membrane modified with graphene oxide nanosheets for passive direct methanol fuel cells. Electrochim Acta 117:393–397
Molla S, Compan V (2011) Performance of composite Nafion/PVA membranes for direct methanol fuel cells. J Power Sources 196:2699–2708
Ahmad H, Kamarudin SK, Hasran UA, Daud WRW (2011) A novel hybrid Nafion-PBI-ZP membrane for direct methanol fuel cells. Int J Hydrog Energy 36:14668–14677
Chiu KF, Chen YR, Lin HC, Ho WH (2010) PTFE coated Nafion proton conducting membranes for direct methanol fuel cells. Surf Coat Technol 205:1647–1650
Tian AH, Kim JY, Shi JY, Lee K, Kim K (2009) Surface-modified Nafion membrane by trioctylphosphine-stabilized palladium nanoparticles for DMFC applications. J Phys Chem Solid 70:1207–1212
Carrette L, Friedric KA, Stimming U (2001) Fuel cells—fundamentals and applications. Fuel Cells 1:5–39
Hamnett A (1997) Mechanism and electrocatalysis in the direct methanol fuel cell. Catalysis Today 38:445–457
Watanabe M, Motoo S (1975) Electrocatalysis by ad-atoms: part II. Enhancement of the oxidation of methanol on platinum by ruthenium ad-atoms. Journal of Electroanalytical Chemistry 60:267–273
Ochal P, Fuente JLG, Tsypkin M, Seland F, Sunde S, Muthuswamy N, Ronning M, Chen D, Garcia S, Alayoglu S, Eichhorn B (2011) CO stripping as an electrochemical tool for characterization of Ru@Pt core-shell catalysts. J Electroanal Chem 655:140–146
Liu H, Song C, Zhang L, Zhang J, Wang H, Wilkinson DP (2006) A review of anode catalysis in the direct methanol fuel cell. J Power Sources 155:95–110
Sahin O, Kivrak H (2013) A comparative study of electrochemical methods on Pt–Ru DMFC anode catalysts: the effect of Ru addition. Int J Hydrog Energy 38:901–909
Hyun MS, Kim SK, Lee B, Peck D, Shul Y, Jung D (2008) Effect of NaBH4 concentration on the characteristics of PtRu/C catalyst for the anode of DMFC prepared by the impregnation method. Catalysis Today 132:138–145
Han K, Lee J, Kim H (2006) Preparation and characterization of high metal content Pt–Ru alloy catalysts on various carbon blacks for DMFCs. Electrochim Acta 52:1697–1702
Xiong L, Manthiram A (2005) Catalytic activity of Pt–Ru alloys synthesized by a microemulsion method in direct methanol fuel cells. Solid State Ion 176:385–392
Sharma S, Pollet BG (2012) Support materials for PEMFC and DMFC electrocatalysts—a review. J Power Sources 208:96–119
Basri S, Kamarudin SK, Daud WRW, Yaakub Z (2010) Nanocatalyst for direct methanol fuel cell (DMFC). Inter J Hydrog Energy 35:7957–7970
Aarnio AS, Borghei M, Anoshkin IV, Nasibulin AG, Kauppinen EI, Ruiz V, Kallio T (2012) Durability of different carbon nanomaterial supports with PtRu catalyst in a direct methanol fuel cell. Int J Hydrog Energy 37:3415–3424
Arikan T, Kannan AM, Kadirgan F (2013) Binary Pt–Pd and ternary Pt–Pd–Ru nanoelectrocatalysts for direct methanol fuel cells. Int J Hydrog Energy 38:2900–2907
Cho YH, Kim OH, Chung DY, Choe H, Cho YH, Sung YE (2014) PtPdCo ternary electrocatalyst for methanol tolerant oxygen reduction reaction in direct methanol fuel cell. Appl Catal Environ 154–155:309–315
Tsiouvaras N, Huerta MVM, Paschos O, Stimming U, Fierro JLG, Pena MA (2010) PtRuMo/C catalysts for direct methanol fuel cells: effect of the pretreatment on the structural characteristics and methanol electrooxidation. Int J Hydrog Energy 35:11478–11488
Neburchilov V, Wang H, Zhang J (2007) Low Pt content Pt–Ru–Ir–Sn quaternary catalysts for anodic methanol oxidation in DMFC. Electrochem Commun 9:1788–1792
Kim JH, Kwon SY, Bhattacharjya D, Chai GS, Yu JS (2013) High-performance quaternary PtRuIrNi electrocatalysts with hierarchical nanostructured carbon support. J Catal 306:133–145
Shobha T, Aravinda CL, Bera P, Devi LG, Mayanna SM (2003) Characterization of Ni-Pd alloy as anode for methanol oxidative fuel cell. Mater Chem Phys 80:656–661
Santhosh P, Gopalan A, Lee KP (2006) Gold nanoparticles dispersed polyaniline grafted multiwall carbon nanotubes as newer electrocatalysts: preparation and performances for methanol oxidation. J Catal 238:177–185
Lu X, Wang H, Zhang S, Cui D, Wang Q (2009) Synthesis, characterization and electrocatalytic properties of carbon nitride nanotubes for methanol electrooxidation. Solid State Sciences 11:428–432
Serov A, Kwak C (2009) Review of non-platinum anode catalysts for DMFC and PEMFC application. Appl Catal Environ 90:313–320
Wang M, Guo DJ, Li HL (2005) High activity of novel Pd/TiO2 nanotube catalysts for methanol electro-oxidation. Journal of Solid State Chemistry 178:1996–2000
Tiwari JN, Tiwari RN, Singh G, Kim KS (2013) Recent progress in the development of anode and cathode catalysts for direct methanol fuel cells. Nano Energy 2:553–578
Wu J, Yuan XZ, Martin JJ, Wang H, Zhang J, Shen J, Wu S, Merida W (2008) A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies. J Power Sources 184:104–119
Wee JH (2007) A feasibility study on direct methanol fuel cells for laptop computers based on a cost comparison with lithium-ion batteries. J Power Sources 173:424–436
Knights SD, Colbow KM, St-Pierre J, Wilkinson DP (2004) Aging mechanisms and lifetime of PEFC and DMFC. J Power Sources 127:127–134
Cha HC, Chen CY, Shiu JY (2009) Investigation on the durability of direct methanol fuel cells. J Power Sources 192:451–456
Zainoodin AM, Kamarudin SK, Masdar MS, Daud WRW, Mohamad AB, Sahari J (2014) Investigation of MEA degradation in a passive direct methanol fuel cell under different modes of operation. Applied Energy 135:364–372
Sarma LS, Chen CH, Wang GR, Hsueh KL, Huang CP, Sheu HS, Liu DG, Lee JF, Hwang BJ (2007) Investigations of direct methanol fuel cell (DMFC) fading mechanisms. J Power Sources 167:358–365
Chen W, Sun G, Guo J, Zhao X, Yan S, Tian J, Tang S, Zhou Z, Xin Q (2006) Test on the degradation of direct methanol fuel cell. Electrochim Acta 51:2391–2399
Zhao X, Li W, Murthy A, Jiang Z, Zuo Z, Manthiram A (2013) A DMFC stack operating with hydrocarbon blend membranes and PteRueSne Ce/C and PdeCo/C electrocatalysts. Int J Hydrog Energy 38:7448–7457
Bresciani F, Rabissi C, Zago M, Marchesi R, Casalegno A (2015) On the effect of gas diffusion layers hydrophobicity on direct methanol fuel cell performance and degradation. J Power Sources 273:680–687
Cheng X, Peng C, You M, Liu L, Zhang Y, Fan Q (2006) Characterization of catalysts and membrane in DMFC lifetime testing. Electrochim Acta 51:4620–4625
Tang Y, Yuan W, Pan M, Tang B, Li Z, Wan Z (2010) Effects of structural aspects on the performance of a passive air-breathing direct methanol fuel cell. J Power Sources 195:5628–5636
Wu QX, Zhao TS, Chen R, Yang WW (2010) Enhancement of water retention in the membrane electrode assembly for direct methanol fuel cells operating with neat methanol. Int J Hydrogen Energ 35:10547–10555
Baglio V, Stassi A, Matera FV, Blasi AD, Antonucci V, Arico AS (2008) Optimization of properties and operating parameters of a passive DMFC mini-stack at ambient temperature. J Power Sources 180:797–802
Yuan Z, Zhang Y, Leng J, Zhao Y, Liu X (2012) Performance of air-breathing direct methanol fuel cell with Au-coated aluminum current collectors. Int J Hydrog Energy 37:2571–2578
Guo JW, Xie XF, Wang JH, Shang YM (2008) Effect of current collector corrosion made from printed circuit board (PCB) on the degradation of self-breathing direct methanol fuel cell stack. Electrochim Acta 53:3056–3064
Yang C, Wang J, Xie X, Wang S, Mao Z, Wang H (2012) Electrochemical behavior of surface treated metal bipolar plates used in passive direct methanol fuel cell. Int J Hydrog Energy 37:867–872
Feng L, Cai W, Li C, Zhang J, Liu C, Xing W (2012) Fabrication and performance evaluation for a novel small planar passive direct methanol fuel cell stack. Fuel 94:401–408
Brescian F, Rabissi C, Casalegno A, Zago M, Marchesi R (2014) Experimental investigation on DMFC temporary degradation. Int J Hydrog Energy 39:21647–21656
Rashidi R, Dincer I, Naterer GF, Berg P (2009) Performance evaluation of direct methanol fuel cells for portable applications. J Power Sources 187:509–516
Wu H, Yuan T, Huang Q, Zhang H, Zou Z, Zheng J, Yang H (2014) Polypyrrole nanowire networks as anodic micro-porous layer for passive direct methanol fuel cells. Electrochim Acta 141:1–5
Chen P, Wu H, Yuan T, Zou Z, Zhang H, Zheng J, Yang H (2014) Electronspun nanofiber network anode for a passive direct methanol fuel cell. J Power Sources 255:70–75
Zainoodin AM, Kamarudin SK, Masdar MS, Daud WRW, Mohamad AB, Sahari J (2014) High power direct methanol fuel cell with a porous carbon nanofiber anode layer. Applied Energy 113:946–954
Yuan T, Kang Y, Chen J, Du C, Qiao Y, Xue X, Zou Z, Yang H (2011) Enhanced performance of a passive direct methanol fuel cell with decreased Nafion aggregate size within the anode catalytic layer. Int J Hydrog Energy 36:10000–10005
Huang Q, Jiang J, Chai J, Yuan T, Zhang H, Zou Z, Zhang X, Yang H (2014) Construction of porous anode by sacrificial template for a passive direct methanol fuel cell. J Power Sources 262:213–218
Daimon H, Kurobe Y (2006) Size reduction of PtRu catalyst particle deposited on carbon support by addition of non-metallic elements. Catalysis Today 111:182–187
Arbizzani C, Biso M, Manferrari E, Mastragostino M (2008) Passive DMFCs with PtRu catalyst on poly(3,4-ethylene dioxythiophene)-polystyrene-4-sulphonate support. J Power Sources 180:41–45
Arbizzani C, Beninati S, Soavi F, Varzi A, Mastragostino M (2008) Supported PtRu on mesoporous carbons for direct methanol fuel cells. J Power Sources 185:615–620
Yuan W, Zhang X, Zhang S, Hu J, Li Z, Tang Y (2015) Lightweight current collector based on printed-circuit-board technology and its structural effects on the passive air-breathing direct methanol fuel cell. Renew Energy 81:664–670
Sun J, Guo T, Deng H, Jiao K, Huang X (2015) Effect of electrode variable contact angle on the performance and transport characteristics of passive direct methanol fuel cells. Int J Hydrog Energy 40:10568–10587
Wang L, He M, Hu Y, Zhang Y, Liu X, Wang G (2015) A “4-cell” modular passive DMFC (direct methanol fuel cell) stack for portable applications. Energy 229–235
Baglio V, Stassi A, Modica E, Antonucci V, Arico AS, Caracino P, Ballabio O, Colombo M, Kopnin E (2010) Performance comparison of portable direct methanol fuel cell mini-stacks based on a low-cost fluorine-free polymer electrolyte and Nafion membrane. Electrochim Acta 55:6022–6027
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shrivastava, N.K., Thombre, S.B. & Chadge, R.B. Liquid feed passive direct methanol fuel cell: challenges and recent advances. Ionics 22, 1–23 (2016). https://doi.org/10.1007/s11581-015-1589-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11581-015-1589-6