Abstract
Co48-x Fe x Cr15Mo14C15B6Er2 (x = 2.5 and 5) bulk metallic glasses (BMGs) with critical size (d c) up to 15 mm in diameter were synthesized by copper mold casting. Co43Fe5Cr15Mo14C15B6Er2 BMG has a wide supercooled liquid region (84 K) and ultrahigh fracture strength exceeding 5000 MPa, which is the highest value for reported metallic glasses with d c exceeding 1 cm. Furthermore, the Poisson ratio, Young modulus, shear modulus and bulk modulus of this alloy were evaluated to be 0.31, 217 GPa, 82 GPa and 214 GPa, respectively. The ideal configurational entropy of Co48−x Fe x Cr15Mo14C15B6Er2 (x = 0 and 5) has been calculated. The introduction of the similar element Fe in the Fe-free Co-Cr-Mo-C-B-Er alloy will be beneficial to increasing the ideal configurational entropy and depressing the critical cooling rate to achieve greater glass-forming ability. The combination of superior glass-forming ability and ultrahigh fracture strength makes the present Co48-x Fe x Cr15Mo14C15B6Er2 (x = 2.5 and 5) BMGs promising candidates as advanced structural materials.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Inoue A, Zhang T, Masumoto T. Amorphous Zr-Al-TM (TM=Co, Ni, Cu) Alloys with significant supercooled liquid region of over 100 K. Mater Trans JIM, 1991, 32: 1005–1010
Inoue A, Zhang T, Nishiyama N, et al. Preparation of 16 mm diameter rod of amorphous Zr65Al7.5Ni10Cu17.5 alloy. Mater Trans JIM, 1993, 34: 1234–1237
Li Y H, Zhang W, Dong C, et al. Unusual compressive plasticity of a centimeter-diameter Zr-based bulk metallic glass with high Zr content. J Alloy Comp, 2010, 540: S2–S5
Inoue A, Zhang T. Fabrication of bulk glassy Zr55Al10Ni5Cu30 alloy of 30 mm in diameter by a suction casting method. 30 mm in diameter by a suction casting method. Mater Trans JIM, 1996, 37: 185–187
Guo F Q, Wang H J, Poon S J, et al. Ductile titanium-based glassy alloy ingots. Appl Phys Lett, 2005, 86: 091907
Wu X F, Suo Z Y, Si Y, et al. Bulk metallic glass formation in a ternary Ti-Cu-Ni alloy system. J Alloy Comp, 2008, 452: 268–272
Xu D H, Duan G, Johnson W L. Unusual glass-forming ability of bulk amorphous alloys based on ordinary metal copper. Phys Rev Lett, 2004, 92: 245505
Choi-Yim H, Conner R D. Amorphous alloys in the Cu-Hf-Ti. J Alloy Comp, 2008, 459: 160–162
Lu Z P, Liu C T, Thompson J R, et al. Structural amorphous steels. Phys Rev Lett, 2004, 92: 245503
Shen J, Chen Q J, Sun J F, et al. Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy. Appl Phys Lett, 2005, 86: 151907
Li L, Liu Y, Zhang T H, et al. Deformation behavior of Fe-based bulk metallic glass during nanoindentation. Sci China Ser G-Phys Mech Astron, 2008, 51: 365–371
Inoue A, Shen B L, Koshiba H, et al. Ultra-high strength above 5000 MPa and soft magnetic properties of Co-Fe-Ta-B bulk glassy alloys. Acta Mater, 2004, 52: 1631–1637
Chang C T, Shen B L, Inoue A. Co-Fe-B-Si-Nb bulk glassy alloys with superhigh strength and extremely low magnetostriction. Appl Phys Lett, 2006, 88: 011901
Wang J F, Li R, Hua N B, et al. Co-based ternary bulk metallic glasses with ultrahigh strength and plasticity. J Mater Res, 2011, 26: 2072–2079
Inoue A, Takeuchi A. Compositions, structure and glass-forming ability of bulk glassy alloys. Metastable and Nanostructured Materials-Nanomat-2001, Proceedings, 2002, 403: 1–11
Li R, Liu F J, Pang S, et al. The influence of similar element coexist ence in (La-Ce)-Al-(Co-Cu) bulk metallic glasses. Mater Trans, 2007, 48: 1680–1683
Li R, Pang S J, Ma C L, et al. Influence of similar atom substitution on glass formation in (La-Ce)-Al-Co bulk metallic glasses. Acta Mater, 2007, 55: 3719–3726
Zhang T, Li R, Pang S J. Effect of similar elements on improving glass-forming ability of La-Ce-based alloys. J Alloy Comp, 2009, 483: 60–63
Ji Y F, Pang S J, Zhang T. Enhanced glass-forming ability of a Sm-based alloy with the addition of La. J Alloy Comp, 2010, 505: 497–500
Li R, Yang Q, Pang S J, et al. Misch metal based metallic glasses. J Alloy Comp, 2008, 450: 181–184
Men H, Pang S J, Li R, et al. Crystallization kinetics of Co48Cr15Mo14C15B6Er2 bulk metallic glass with high thermal stability. Chin Phys Lett, 2006, 23: 417–419
Men H, Pang S J, Zhang T. Effect of Er doping on glass-forming ability of Co50Cr15Mo14C15B6 alloy. J Mater Res, 2006, 21: 958–961
Li R, Stoica M, Wang G, et al. Glass formation, thermal properties, and elastic constants of La-Al-Co alloys. J Mater Res, 2010, 25: 1398–1404
Kumar G, Tang H X, Schroers J. Nanomoulding with amorphous metals. Nature, 2009, 457: 868–872
Kumar G, Schroers J. Write and erase mechanisms for bulk metallic glass. Appl Phys Lett, 2008, 92: 031901
Lin X H, Johnson W L. Formation of Ti-Zr-Cu-Ni bulk metallic glasses. J Appl Phys, 1995, 78: 6514–6519
Takeuchi A, Inoue A. Evaluation of glass-forming ability for metallic glasses from time-reduced temperature-transformation diagram. Mater Trans, 2001, 42: 2374–2381
Takeuchi A, Yubuta K, Makino A, et al. Evaluation of glass-forming ability of binary metallic glasses with liquidus temperature, crystallographic data from binary phase diagrams and molecular dynamics simulations. J Alloy Comp, 2009, 483: 102–106
Takeuchi A, Inoue A. Quantitative evaluation of critical cooling rate for metallic glasses. Mater Sci Eng A, 2001, 304: 446–451
Pan D G, Liu W Y, Zhang H F, et al. Mg-Cu-Ag-Gd-Ni bulk metallic glass with high mechanical strength. J Alloy Comp, 2007, 438: 142–144
Inoue A, Nishiyama N, Kimura H. Preparation and thermal stability of bulk amorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter. Mater Trans JIM, 1996, 37: 181–184
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
This article is published under an open access license. Please check the 'Copyright Information' section either on this page or in the PDF for details of this license and what re-use is permitted. If your intended use exceeds what is permitted by the license or if you are unable to locate the licence and re-use information, please contact the Rights and Permissions team.
About this article
Cite this article
Zhang, T., Yang, Q., Ji, Y. et al. Centimeter-scale-diameter Co-based bulk metallic glasses with fracture strength exceeding 5000 MPa. Chin. Sci. Bull. 56, 3972–3977 (2011). https://doi.org/10.1007/s11434-011-4765-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-011-4765-8