Abstract
The guide-weight method is introduced to solve the topology optimization problems of thermoelastic structures in this paper. First, the solid isotropic microstructure with penalization (SIMP) with different penalty factors is selected as a material interpolation model for the thermal and mechanical fields. The general criteria of the guide-weight method is then presented. Two types of iteration formulas of the guide-weight method are applied to the topology optimization of thermoelastic structures, one of which is to minimize the mean compliance of the structure with material constraint, whereas the other one is to minimize the total weight with displacement constraint. For each type of problem, sensitivity analysis is conducted based on SIMP model. Finally, four classical 2-dimensional numerical examples and a 3-dimensional numerical example considering the thermal field are selected to perform calculation. The factors that affect the optimal topology are discussed, and the performance of the guide-weight method is tested. The results show that the guide-weight method has the advantages of simple iterative formula, fast convergence and relatively clear topology result.
Similar content being viewed by others
References
Rozvany G I N. A critical review of established methods of structural topology optimization. Struct Multidiscip Optim, 2009, 37: 217–237
Deaton J D, Grandhi R V. A survey of structural and multidisciplinary continuum topology optimization: post 2000. Struct Multidiscip Optim, 2013: 1–38
Bendsøe M P, Kikuchi N. Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech and Eng, 1988, 71: 197–224
Xie Y M, Steven G P. A simple evolutionaly procedure for structural optimization. Comput Struct, 1993, 49: 885–896
Bendsøe M P. Optimal shape design as a material distribution problem. Struct Optim, 1989, 1: 193–202
Bendsøe M P, Sigmund O. Material interpolation schemes in topology optimization. Arch Appl Mech, 1999, 69: 635–654
Stolpe M, Svanberg K. An alternative interpolation scheme for minimum compliance topology optimization. Struct Multidiscip Optim 2001, 22: 116–124
Sui Y K. Modeling Transformation and Optimization New Developments of Structural Synthesis Method (in Chinese). Dalian: Dalian Univ Tech Press, 1996
Sui Y K. ICM method of topologyical optimization for truss, frame and continuum structure. WWCS-MO-4, Dalian, China, 2001
Rozvany G I N, Zhou M. The COC algorithm, part I: Cross-section optimization or sizing. Comput Methods Appl Mech Eng, 1991, 89: 381–308
Rozany G I N, Zhou M. The COC algorithm, part II: Topological, geometrical and generalized shape optimization. Comput Methods Appl Mech Eng, 1991, 89: 309–336
Bruyneel M, Duysinx P, Fleury C. Afamily of MMA approximations for structural optimization. Struct Multidiscip Optim, 2002, 24: 263–276
Wang X, Rong J, Zhao Z, et al. Structure topological optimization design with displacmement constraints based on the approximation of moving asymptotes (in Chinese). J Chansha Univ Sci Tech, 2009, 6: 33–38
Rodrigues H, Fernandes P. A material based model for topology optimization of thermoelastic structures. Int J Numer Meth Eng, 1995, 38: 1951–1965
Li Q, Steven G P, Xie Y M. Displacement minimization of thermoelastic structures by evolutionary thickness design. Comput Methods Appl Mech Eng, 1999, 179: 361–378
Cho S, Choi J Y. Efficient topology optimization of thermo-elasticity problems using coupled field adjoint sensitivity analysis method. Finite Elem Anal Des, 2005, 41: 1481–1495
Zuo K, Qian Q, Zhao Y D, et al. Research on the topology optimization about thermo-structural coupling field (in Chinese). Acta Mech Solida Sinica, 2005, 26: 447–452
Xia Q, Wang M Y. Topology optimization of thermoelastic structures using level set method. Comput Mech, 2008, 42: 837–857
Sun S P, Zhang W H. Topology optimal design of thermo-elastic structures (in Chinese). Chinese J Theor Appl mech, 2009, 41: 878–887
Gao T, Zhang W. Topology optimization involving thermo-elastic stress loads. Struct Multidiscip Optim, 2010, 42: 725–738.
Pedersen P, Pedersen N L. Strength optimized designs of thermoelastic structures. Struct Multidiscip Optim, 2010, 42: 681–691.
Deaton J D, Grandhi R V. Topology Optimization of Thermal Structures with Stress Constraints. 54th AIAA/ASME/ASCE/AHS/ASC structures, Structural Dynamics, and Materials Conference, Boston, 2013
Chen S. Some Modern Design Methods of Precise and Complex Structures (in Chinese). Beijing: Press of Beijing Univ Aeronautics Astronautics, 1993
Chen S. Analysis, Synthesis and Optimization of Engineering Structural Systems (in Chinese). Hongkong: China Sci Culture P House, 2008
Liu X J, Li Z D, Wang L, et al. Solving topology optimization problems by the Guide-Weight method. Front Mech Eng, 2011, 6: 136–150
Liu X J, Li Z D, Chen X. A new solution for topology optimization problems with multiple loads: The guide-weight method. Sci China Tech Sci, 2011, 54: 1505–1514
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, X., Wang, C. & Zhou, Y. Topology optimization of thermoelastic structures using the guide-weight method. Sci. China Technol. Sci. 57, 968–979 (2014). https://doi.org/10.1007/s11431-014-5521-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-014-5521-5