Abstract
Purpose
Due to the increased consumption of carbon fibers, it is expected that an important amount of carbon-fiber-reinforced plastic (CFRP)-based products will enter in the coming years, at the end of their life cycle. Considering the challenges ahead in the establishment of a new recycling sector, it is appropriate to investigate the sustainable creation of a CFRP end-of-life management sector. The following work is part of a national funded project called SEARRCH, whose goal was to provide sustainability assessment indicators and methodology to stakeholders, for the implementation of a carbon fiber recycling sector. This article will focus on detailing the methodology aiming at characterizing the social dimension through the evaluation of potential job creation.
Methods
This publication describes the development of a method for the evaluation of potential job creation built on an adaptation of the Hunkeler societal life cycle assessment (societal LCA). This methodology based on life cycle inventory (LCI) has been adapted using input-output tables from the French national institute of statistics and economic studies (INSEE) or the Social Hotspot Database (SHDB) and a material flow analysis (MFA). A practical application in the CFRP recycling sector is then described. This research was conducted as part of a national project funded by the French Government France; therefore, this study respects data corresponding to the French national borders and assumes the use of a pyrolysis recycling process in calculating the amount of CFRP production and waste available at the end-of-life stage from the aeronautical sector.
Results and discussion
The amount of direct and indirect employment was obtained for different periods of time. Using technical coefficients extracted from the SHDB, it was determined that for the CFRP coming from the aeronautical sector, 85 direct and indirect induced jobs would be created for the period between 2046 and 2050. Using technical coefficients calculated from the input-output tables provided by the INSEE, the estimated number of jobs was 108 for the same period.
Conclusions
This publication demonstrated that the quantity of CFRP at the end-of-life stage could represent a potential benefit for direct and indirect job creation if the implementation of the end-of-life CFRP sector is anchored in a sustainable way, by establishing a new recycling sector for this material. Moreover, this method can provide calculations for other periods of time, sectors, and geographic scales, separately or in combination.
Similar content being viewed by others
References
Andrews E, Lesage P, Benoît C, Parent J, Norris G, Revéret J-P (2009) Life cycle attribute assessment. J Ind Ecol 13:565–578
Benoît-Norris C, Aulisio D, G.A.N (2013) The Social Hotspots Database [WWW Document]. URL https://www.socialhotspot.org/ (accessed 8.30.18)
Bouvier G (2000) Les comptes d’emploi, d’heures travaillées et de productivité’. INSEE Base
Chang Y, Ries RJ, Wang Y (2011) The quantification of the embodied impacts of construction projects on energy, environment, and society based on I–O LCA. Energy Policy 39:6321–6330
Ciroth A, Eisfeldt F (2016) PSILCA—a product social impact life cycle assessment database
Deboutières A, Georgeault L (2015) Quel potentiel d’emplois pour une économie circulaire ? In: Institut de l’économie circulaire
Dwyer L, Forsyth P, Spurr R (2004) Evaluating tourism’s economic effects: new and old approaches. Tour Manag 25:307–317
Emmerich R, Kuppinger J (2014) Recovering carbon fibers. Kunststoffe Int 2014:62–65
European Investment Bank (2013) The Economic Appraisal of Investment Projects at the EIB - Projects Directorate 2013
EUROSTAT S (2013) European Commission (Eurostat). Retrieved February 27, 2019, from https://www.ec.europa.eu/eurostat/fr/data/database
Feschet P (2014) Analyse de Cycle de Vie Sociale. Pour un nouveau cadre conceptuel et théorique
Franze J, Ciroth A (2011) A comparison of cut roses from Ecuador and the Netherlands. Int J Life Cycle Assess 16:366–379
Garrabé M (2016) Evaluation économique générale
Griffing E, Overcash M (2010) Carbon fiber HS from PAN [UIDCarbFibHS]
Helbig C, Gemechu ED, Pillain B, Young SB, Thorenz A, Tuma A, Sonnemann G (2016) Extending the geopolitical supply risk indicator: application of life cycle sustainability assessment to the petrochemical supply chain of polyacrylonitrile-based carbon fibers. J Clean Prod 137:1170–1178
Hunkeler D (2006) Societal LCA methodology and case study. Int J Life Cycle Assess 11:371–382
INSEE (2017) Le tableau des entrées-sorties (TES) [WWW Document]. URL https://www.insee.fr/fr/statistiques/2383687#documentation (accessed 3.29.17)
ISO 14044 (2006) ISO 14044: Environmental Management, Life Cycle Assessment, Requirements and Guidelines, International Organization for Standardization
Jolliet O, Saadé M, Crettaz P (2010) Analyse du cycle de vie: comprendre et réaliser un écobilan (Vol. 23). PPUR Presses polytechniques
Labuschagne C, Brent AC (2008) An industry perspective of the completeness and relevance of a social assessment framework for project and technology management in the manufacturing sector. J Clean Prod 16:253–262
Lee CK, Taylor T (2005) Critical reflections on the economic impact assessment of a mega-event: the case of 2002 FIFA World Cup. Tour Manag 26:595–603
Lefeuvre A, Garnier S, Jacquemin L, Pillain B, Sonnemann G (2017) Anticipating in-use stocks of carbon fiber reinforced polymers and related waste flows generated by the commercial aeronautical sector until 2050. Resour Conserv Recycl 125:265–272
Lenzen M, Moran D, Kanemoto K (2013) Building Eora : a global multi- region input—output database at high country and sector resolution building Eora : a global multi-region input—output database at high country and sector resolution. Econ Syst Res 25:20–49. https://doi.org/10.1080/09535314.2013.769938
Leontief W (1986) Input-output economics. Oxford University Press
Macombe C, Lagarde V, Falque A, Feschet P, Garrabé M, Gillet C, Loeillet D (2013) Social LCAs. Socioeconomic effects in value chains, 1srt Editi. ed. FruiTrop, CIRAD
Manik Y, Leahy J, Halog A (2013) Social life cycle assessment of palm oil biodiesel: a case study in Jambi Province of Indonesia. Int J Life Cycle Assess 18:1386–1392
Murray J (2015) The sustainability practitioner’s guide to social analysis and assessment. Common Ground Publishing, 264 pp
NEA (2006) Selected recent statistics on road freight transport in Europe. Organisation mondiale du transport routier (IRU). Rijswijk. Retrieved from https://www.iru.org/sites/default/files/2016-01/en-statisticsgoods_0.pdf. Accessed 27 Feb 2019
Norris G.A, Benoit-Norris C (2015) The Social Hotspots Database Context of the SHDB. In: Murray J, Mcbain D, Wiedmann T (Eds) The Sustainability Practitioner’s Guide to Social Analysis and Assessment; ; Common Ground Publishing: Champaign, IL, USA, pp. 52–73
Norris C, Norris G, Aulisio D (2014) Efficient assessment of social hotspots in the supply chains of 100 product categories using the social hotspots database. Sustainability 6:6973–6984
Nunes AO, Viana LR, Guineheuc PM, da Silva Moris VA, de Paiva JMF, Barna R, Soudais Y (2017) Life cycle assessment of a steam thermolysis process to recover carbon fibers from carbon fiber-reinforced polymer waste. Int J Life Cycle Assess 23:1825–1838
Papong S, Itsubo N, Malakul P, Shukuya M (2015) Development of the social inventory database in Thailand using input-output analysis. Sustainability (Switzerland) 7:7684–7713. https://doi.org/10.3390/su7067684
Paragahawewa U, Blankett P, Small B (2009) Social life cycle analysis (S-LCA): some methodological issues and potential application to cheese production in New Zealand 42
Pickering SJ (2006) Recycling technologies for thermoset composite materials—current status. Compos Part A Appl Sci Manuf 37:1206–1215
Pillain B, Gemechu E, Sonnemann G (2017) Identification of key sustainability performance indicators and related assessment methods for the carbon fiber recycling sector. Ecol Indic 72:833–847
Pimenta S, Pinho ST (2011) Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. Waste Manag 31:378–392
Rebitzer G, Ekvall T, Frischknecht R, Hunkeler D, Norris G, Rydberg T, Schmidt WP, Suh S, Weidema BP, Pennington DW (2004) Life cycle assessment part 1: framework, goal and scope definition, inventory analysis, and applications. Environ Int 30:701–720
Roux M, Dransfeld C, Giger L (2013) Recycling of high performance thermoplastic composites with high voltage fragmentation, in: The 19th International Conference on Composite Materials. pp 1–8
Roux M, Eguémann N, Dransfeld C, Thiébaud F, Perreux D (2017) Thermoplastic carbon fibre-reinforced polymer recycling with electrodynamical fragmentation. J Thermoplast Compos Mater 30:381–403
Short W, Packey DJ, Holt T (1995) A manual for the economic evaluation of energy efficiency and renewable energy technologies. National Renewable Energy Laboratory:96
United Nations Environment Programme (2009) Guidelines for social life cycle assessment of products. United Nations Environment Programme
Valerian F, du Fou de Kerdaniel F (2013) L’industrie du recyclage en France : changer de dimension pour créer des emplois
Weisbrod G, Weisbrod B (1997) Measuring economic impact of projects apd programs. Transp Res Circ #477:1–34
Witik RA, Teuscher R, Michaud V, Ludwig C, Månson J-AE (2013) Carbon fibre reinforced composite waste: an environmental assessment of recycling, energy recovery and landfilling. Compos Part A Appl Sci Manuf 49:89–99
Witten E, Jahn B, Karl D (2015) Composites market report 2015. Mark Dev Trends, Challenges Oppor, pp 2–28
Zamani B, Sandin G, Svanström M, Peters GM (2018) Hotspot identification in the clothing industry using social life cycle assessment—opportunities and challenges of input-output modelling. Int J Life Cycle Assess 23:536–546
Acknowledgments
The authors would like to acknowledge the financial support from the French National Research Agency (ANR), which funded the SEARRCH project (Sustainability Engineering Assessment Research for Recycled Composites with High value) in which this research was conducted (project ID: ANR-13-ECOT-0005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Marzia Traverso
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Pillain, B., Viana, L.R., Lefeuvre, A. et al. Social life cycle assessment framework for evaluation of potential job creation with an application in the French carbon fiber aeronautical recycling sector. Int J Life Cycle Assess 24, 1729–1742 (2019). https://doi.org/10.1007/s11367-019-01593-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11367-019-01593-y