Skip to main content
SpringerLink
Log in

Binary blended fly ash concrete with improved chemical resistance in natural and industrial environments

  • Research Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

This study reports the enhanced chemical resistance of a blended concrete mix (CFNI) made with 40 wt.% fly ash, 2 wt.% nanoparticles, and 2 wt.% sodium nitrite inhibitor as partial replacement of cement against calcium leaching, acid and sulfate attacks. The concrete test specimens of four different compositions were fabricated and immersed in natural seawater, 3% sulfuric acid solution, and 10% magnesium sulfate solution for 120 days. Long-term chemical deterioration of the concrete systems is evaluated by assessing visual changes of the specimens and solutions along with the changes in percentage mass loss, compressive strength of the concrete, pH of the solution, and dimensions. The results indicate that CFNI concrete exhibits a superior resistance against chemical attack under all the three aggressive environments. Detailed chemical characterization of the specimens, carried out using XRD, FTIR, and thermogravimetric analysis, reveal a reduced CaO content, absence of deterioration phases like ettringite, brucite, and enhanced C-S-H content in the CFNI concrete. The addition of nanoparticles and inhibitors into fly ash concrete has lowered w/c ratio, increased surface pH, enabled conversion of soluble calcium hydroxide into insoluble calcium silicate hydrate, filled pores/voids, and reduced shrinkage and cracking. The compact microstructure of the CFNI prevented leaching and reduced the ingress of aggressive chemical ions into the concrete. Our results demonstrate that incorporation of nanoparticles and inhibitor into the fly ash concrete composition is ideally suited for the design of high-quality, low-permeable concrete structures that is the key for enhanced chemical resistance in natural and industrial environments.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16

Similar content being viewed by others

Data availability

The raw/processed data required to reproduce these findings cannot be shared at this time as the data also forms part of an ongoing study.

References

  • Abbaspour A, Tanyu BF, Cetin B (2016) Impact of aging on leaching characteristics of recycled concrete aggregate. Environ Sci Pollut Res 23:20835–20852

    Article  CAS  Google Scholar 

  • Abdel-Gawwad H, Heikal M, Mohammed MS, El-Aleem SA, Hassan HS, García SV, Rashad AM (2019) Evaluating the impact of nano-magnesium calcite waste on the performance of cement mortar in normal and sulfate-rich media. Constr Build Mater 203:392–400

    Article  CAS  Google Scholar 

  • Al-Akhras NM (2006) Durability of metakaolin concrete to sulfate attack. Cem Concr Res 36:1727–1734

    Article  CAS  Google Scholar 

  • Al-Sodani KAA, Al-Amoudi OSB, Maslehuddin M, Shameem M (2018) Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration. Constr Build Mater 163:97–112

    Article  CAS  Google Scholar 

  • Ariffin M, Bhutta M, Hussin M, Tahir MM, Aziah N (2013) Sulfuric acid resistance of blended ash geopolymer concrete. Constr Build Mater 43:80–86

    Article  Google Scholar 

  • ASTM C150/C150M-18 A (2018) Standard specification for Portland cement. ASTM International, West Conshohocken, PA

    Google Scholar 

  • ASTM C267 (2003) Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacings and polymer concretes.

  • ASTM C33 (2016) Standard specification for concrete aggregates ASTM international, West Conshohocken, PA

  • ASTM C39/C39M-18 (2017) Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken, PA

    Google Scholar 

  • ASTM C618–17a A (2017) Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA

    Google Scholar 

  • Atewi YR, Hasan MF, Güneyisi E (2019) Fracture and permeability properties of glass fiber reinforced self-compacting concrete with and without nanosilica. Constr Build Mater 226:993–1005

    Article  CAS  Google Scholar 

  • Attiogbe EK, Rizkalla SH (1988) Response of concrete to sulfuric acid attack. ACI Mater J 85:481–488

    CAS  Google Scholar 

  • Aziez M, Bezzar A (2017) Magnesium sulphate attacks on mortars-influence of temperature, type of sand and type of cement. J Eng Sci Technol Rev 10:41–50

    Article  CAS  Google Scholar 

  • Basheer L, Kropp J, Cleland DJ (2001) Assessment of the durability of concrete from its permeation properties: a review. Constr Build Mater 15:93–103

    Article  Google Scholar 

  • Bassuoni M, Nehdi M (2007) Resistance of self-consolidating concrete to sulfuric acid attack with consecutive pH reduction. Cem Concr Res 37:1070–1084

    Article  CAS  Google Scholar 

  • Bassuoni M, Nehdi M (2009) Durability of self-consolidating concrete to sulfate attack under combined cyclic environments and flexural loading. Cem Concr Res 39:206–226

    Article  CAS  Google Scholar 

  • Bondar D, Lynsdale C, Milestone N, Hassani N (2015) Sulfate resistance of alkali activated pozzolans. Int J Concr Struct M 9:145–158

    Article  CAS  Google Scholar 

  • Camiletti J, Soliman AM, Nehdi ML (2013) Effect of nano-calcium carbonate on early-age properties of ultra-high-performance concrete. Mag Concr Res 65:297–307

    Article  Google Scholar 

  • Çevik A, Alzeebaree R, Humur G, Niş A, Gülşan ME (2018) Effect of nano-silica on the chemical durability and mechanical performance of fly ash based geopolymer concrete. Ceram Int 44:12253–12264

    Article  Google Scholar 

  • Chang H, Huang PJ, Hou S (1999) Application of thermo-Raman spectroscopy to study dehydration of CaSO4• 2H2O and CaSO4• 0.5 H2O. Mater Chem Phys 58:12–19

    Article  CAS  Google Scholar 

  • Chang ZT, Song XJ, Munn R, Marosszeky M (2005) Using limestone aggregates and different cements for enhancing resistance of concrete to sulphuric acid attack. Cem Concr Res 35:1486–1494

    Article  CAS  Google Scholar 

  • Diab AM, Elyamany HE, Elmoaty AEMA, Sreh MM (2019) Effect of nanomaterials additives on performance of concrete resistance against magnesium sulfate and acids. Constr Build Mater 210:210–231

    Article  CAS  Google Scholar 

  • Essawy AA, Aleem SAE (2014) Physico-mechanical properties, potent adsorptive and photocatalytic efficacies of sulfate resisting cement blends containing micro silica and nano-TiO2. Constr Build Mater 52:1–8

    Article  Google Scholar 

  • Gao X, Ma B, Yang Y, Su A (2008) Sulfate attack of cement-based material with limestone filler exposed to different environments. J Materi Eng Perform 17:543–549

    Article  CAS  Google Scholar 

  • Garcés P, Saura P, Zornoza E, Andrade C (2011) Influence of pH on the nitrite corrosion inhibition of reinforcing steel in simulated concrete pore solution. Corros Sci 53:3991–4000

    Article  Google Scholar 

  • Gérard B, Le Bellego C, Bernard O (2002) Simplified modelling of calcium leaching of concrete in various environments. Mater Struct 35:632–640

    Article  Google Scholar 

  • Gopalakrishnan R, Jeyalakshmi R (2020) The effects on durability and mechanical properties of multiple nano and micro additive OPC mortar exposed to combined chloride and sulfate attack. Mater. Sci. Semicond. Process. 106:104772

    Article  CAS  Google Scholar 

  • Grengg C, Mittermayr F, Baldermann A, Böttcher ME, Leis A, Koraimann G, Grunert P, Dietzel M (2015) Microbiologically induced concrete corrosion: a case study from a combined sewer network. Cem Concr Res 77:16–25

    Article  CAS  Google Scholar 

  • Ha TH, Muralidharan S, Bae JH, Ha YC, Lee HG, Park KW, Kim DK (2007) Accelerated short-term techniques to evaluate the corrosion performance of steel in fly ash blended concrete. Build Environ 42:78–85

    Article  Google Scholar 

  • Harilal M, Rathish V, Anandkumar B, George R, Mohammed MHS, Philip J, Amarendra G (2019) High performance green concrete (HPGC) with improved strength and chloride ion penetration resistance by synergistic action of fly ash, nanoparticles and corrosion inhibitor. Constr Build Mater 198:299–312

    Article  CAS  Google Scholar 

  • Hawreen A, Bogas J (2019) Creep, shrinkage and mechanical properties of concrete reinforced with different types of carbon nanotubes. Constr Build Mater 198:70–81

    Article  CAS  Google Scholar 

  • Hemalatha T, Ramaswamy A (2017) A review on fly ash characteristics—towards promoting high volume utilization in developing sustainable concrete. J. Cleaner Prod 147:546–559

    Article  Google Scholar 

  • Hosan A, Shaikh FUA (2020) Influence of nano-CaCO3 addition on the compressive strength and microstructure of high volume slag and high volume slag-fly ash blended pastes. J Build Eng 27:100929

    Article  Google Scholar 

  • IS 10262 (1982) Recommended guidelines for concrete mix design. Bureau of Indian Standards, New Delhi, India

    Google Scholar 

  • IS 3025 (2009) Method of sampling and test (physical and chemical) for water and wastewater part 21: Hardness (Second Revision).

  • Jain J, Neithalath N (2009) Analysis of calcium leaching behavior of plain and modified cement pastes in pure water. Cem Concr Compos 31:176–185

    Article  CAS  Google Scholar 

  • Jayapalan A, Lee B, Kurtis K (2009) Effect of nano-sized titanium dioxide on early age hydration of Portland cement. In: Nanotechnology in Construction 3. Springer, pp 267-273

  • Joorabchian SM (2010) Durability of concrete exposed to sulfuric acid attack. Thesis and dissertations presented to Ryerson University, Toronto, Ontario, Canada

  • Karakoc MB, Türkmen İ, Maraş MM, Kantarci F, Demirboğa RJ (2016) Sulfate resistance of ferrochrome slag based geopolymer concrete. Ceram Int 42:1254–1260

    Article  CAS  Google Scholar 

  • Lee ST (2007) Performance deterioration of Portland cement matrix due to magnesium sulfate attack. KSCE J Civ Eng 11:157–163

    Article  Google Scholar 

  • Li G (2004) Properties of high-volume fly ash concrete incorporating nano-SiO2. Cem Concr Res 34:1043–1049

    Article  CAS  Google Scholar 

  • Li D, Chen Y, Shen J, Su J, Wu X (2000) The influence of alkalinity on activation and microstructure of fly ash. Cem Concr Res 30:881–886

    Article  CAS  Google Scholar 

  • Liew K, Sojobi A, Zhang L (2017) Green concrete: Prospects and challenges. Constr Build Mater 156:1063–1095

    Article  Google Scholar 

  • Lo FC, Lo SL, Lee MG (2020) Effect of partially replacing ordinary Portland cement with municipal solid waste incinerator ashes and rice husk ashes on pervious concrete quality. Environ Sci Pollut Res 27:23742–23760

    Article  CAS  Google Scholar 

  • Long T, Wang Q, Guan Z, Chen Y, Shi X (2017) Deterioration and microstructural evolution of the fly ash geopolymer concrete against MgSO4 solution. Adv Mater Sci Eng 2017:1–11

    Article  CAS  Google Scholar 

  • Lu C, Yang H, Liu W, Mei G, Wang H, Ge X (2014) Effect of fly ash on compressive strength degradation due to calcium leaching procedure. Adv Cem Res 26:137–144

    Article  CAS  Google Scholar 

  • Mahdikhani M, Ramezanianpour AA (2015) New methods development for evaluation rheological properties of self-consolidating mortars. Constr Build Mater 75:136–143

    Article  Google Scholar 

  • Mainguy M, Tognazzi C, Torrenti JM, Adenot F (2000) Modelling of leaching in pure cement paste and mortar. Cem Concr Res 30:83–90

    Article  CAS  Google Scholar 

  • Matalkah F, Salem T, Soroushian P (2018) Acid resistance and corrosion protection potential of concrete prepared with alkali aluminosilicate cement. J Build Eng 20:705–711

    Article  Google Scholar 

  • Moslemi AM, Khosravi A, Izadinia M, Heydari M (2014) Application of nano silica in concrete for enhanced resistance against sulfate attack. Adv Mat Res 829:874–878

    Google Scholar 

  • Mousavi MA, Bahari A (2019) Influence of functionalized MWCNT on microstructure and mechanical properties of cement paste. Sādhanā 44:103

    Article  Google Scholar 

  • Naik TR (2008) Sustainability of concrete construction. Pract Period Struct Des Constr 13:98–103

    Article  Google Scholar 

  • Nasrazadani S, Eghtesad R, Sudoi E, Vupputuri S, Ramsey J, Ley MT (2016) Application of Fourier transform infrared spectroscopy to study concrete degradation induced by biogenic sulfuric acid. Mater Struct 49:2025–2034

    Article  CAS  Google Scholar 

  • Neville A (1995) Properties of concrete. Fourth London: Harlow: Longman Group:844

  • Palla R, Karade SR, Mishra G, Sharma U, Singh LP, Materials B (2017) High strength sustainable concrete using silica nanoparticles. Constr Build Mater 138:285–295

    Article  CAS  Google Scholar 

  • Pavlik V, Unčík S (1997) The rate of corrosion of hardened cement pastes and mortars with additive of silica fume in acids. Cem Concr Res 27:1731–1745

    Article  CAS  Google Scholar 

  • Portland Cement Association (2001) Ettringite formation and the performance of concrete, Portland Cement Association, 2166

  • Rahla KM, Mateus R, Bragança L (2019) Comparative sustainability assessment of binary blended concretes using supplementary cementitious materials (SCMs) and ordinary Portland cement (OPC). J Cleaner Prod 220:445–459

    Article  CAS  Google Scholar 

  • Rozière E, Loukili A, El Hachem R, Grondin F (2009) Durability of concrete exposed to leaching and external sulphate attacks. Cem Concr Res 39:1188–1198

    Article  Google Scholar 

  • Ryu HS, Lim CG, Kang TW, Lim S, Kim HT, Shin SH (2019) Evaluation of corrosion resistance of corrosion inhibitors for concrete structures by electrochemical testing in saturated Ca (OH) 2 solutions with NaCl and Na2SO4. Adv. Mater. Sci. Eng 2019

  • Salemi N, Behfarnia K (2013) Effect of nano-particles on durability of fiber-reinforced concrete pavement. Constr Build Mater 48:934–941

    Article  Google Scholar 

  • Sanni SH, Khadiranaikar RB (2012) Performance of geopolymer concrete under severe environmental conditions. Int J Civ Struct Eng 3:396–407

    CAS  Google Scholar 

  • Santhanam M, Cohen MD, Olek J (2003) Effects of gypsum formation on the performance of cement mortars during external sulfate attack. Cem Concr Res 33:325–332

    Article  CAS  Google Scholar 

  • Shaheen F, Pradhan B (2017) Influence of sulfate ion and associated cation type on steel reinforcement corrosion in concrete powder aqueous solution in the presence of chloride ions. Cem Concr Res 91:73–86

    Article  CAS  Google Scholar 

  • Shaikh FU, Supit SW (2014) Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles. Constr Build Mater 70:309–321

    Article  Google Scholar 

  • Shao Q, Zheng K, Zhou X, Zhou J, Zeng X (2019) Enhancement of nano-alumina on long-term strength of Portland cement and the relation to its influences on compositional and microstructural aspects. Cem Concr Compos 98:39–48

    Article  CAS  Google Scholar 

  • Shi C, Stegemann JA (2000) Acid corrosion resistance of different cementing materials. Cem Concr Res 30:803–808

    Article  CAS  Google Scholar 

  • Singh L, Ali D, Tyagi I, Sharma U, Singh R, Hou P (2019) Durability studies of nano-engineered fly ash concrete. Constr Build Mater 194:205–215

    Article  CAS  Google Scholar 

  • Song Z, Liu Y, Jiang L, Guo M, Chen J, Wang W, Xu N (2019) Determination of calcium leaching behavior of cement pastes exposed to ammonium chloride aqueous solution via an electrochemical impedance spectroscopic approach. Constr Build Mater 196:267–276

    Article  CAS  Google Scholar 

  • Tang YJ, Zuo XB, Yin GJ, Davoudi H, Li XN (2018) Influence of calcium leaching on chloride diffusivity in cement-based materials. Constr Build Mater 174:310–319

    Article  CAS  Google Scholar 

  • Thokchom S (2014) Fly ash geopolymer pastes in sulphuric acid. Int J Eng Innov Res 3:943–947

    Google Scholar 

  • Tobon JI, Payá J, Restrepo OJ (2015) Study of durability of Portland cement mortars blended with silica nanoparticles. Constr Build Mater 80:92–97

    Article  Google Scholar 

  • Torres ALT, Souza LMS, Silva MIP, de Andrade Silva F (2019) Concrete degradation mechanisms by sulfuric acid attack. Mag Concr Res 71:349–361

    Article  Google Scholar 

  • Tosun-Felekoğlu K (2012) The effect of C3A content on sulfate durability of Portland limestone cement mortars. Constr Build Mater 36:437–447

    Article  Google Scholar 

  • Trezza M, Lavat AE (2001) Analysis of the system 3CaO• Al2O3–CaSO4• 2H2O–CaCO3–H2O by FT-IR spectroscopy. Cem Concr Res 31:869–872

    Article  CAS  Google Scholar 

  • Uthaman S, George R, Vishwakarma V, Ramachandran D, Thinaharan C, Viswanathan K, Mudali UK (2018) Surface modification of fly ash concrete through nanophase incorporation for enhanced chemical deterioration resistance. J Bio Tribo Corros 4:15

    Article  Google Scholar 

  • Vaičiukynienė D, Skipkiūnas G, Daukšys M, Sasnauskas V (2013) Cement hydration with zeolite-based additive. Chemija 24:271–278

    Google Scholar 

  • Vedalakshmi R, Sundara Raj A, Palaniswamy N (2008) Identification of various chemical phenomena in concrete using thermal analysis. Indian J Chem Techn 15:388–396

    CAS  Google Scholar 

  • Vedalakshmi R, Saraswathy V, Yong AK (2011) Performance evaluation of blended cement concretes under MgSO4 attack. Mag Concr Res 63:669–681

    Article  CAS  Google Scholar 

  • Vishwakarma V, George R, Ramachandran D, Anandkumar B, Mudali UK (2014) Studies of detailed Biofilm characterization on fly ash concrete in comparison with normal and superplasticizer concrete in seawater environments. Environ Technol 35:42–51

    Article  CAS  Google Scholar 

  • Vishwakarma V, Uthaman S, Dasnamoorthy R, Kanagasabai V (2020) Investigation on surface sulfate attack of nanoparticle-modified fly ash concrete. Environ Sci Pollut Res 27:1–9

    Article  Google Scholar 

  • Wallah S, Rangan BV (2006) Low-calcium fly ash-based geopolymer concrete: long-term properties. Curtin University of Technology, Perth Australia

    Google Scholar 

  • Wang C, Yang C, Liu F, Wan C, Pu X (2012) Preparation of ultra-high performance concrete with common technology and materials. Cem Concr Compos 34:538–544

    Article  CAS  Google Scholar 

  • Wang C, Chen X, Wei X, Wang R (2017) Can nanosilica sol prevent oil well cement from strength retrogression under high temperature? Constr Build Mater 144:574–585

    Article  CAS  Google Scholar 

  • Wang W, Liu X, Guo L, Duan P (2019) Evaluation of properties and microstructure of cement paste blended with metakaolin subjected to high temperatures. Materials 12:941

    Article  CAS  Google Scholar 

  • Wee T, Suryavanshi AK, Wong S, Rahman AA (2000) Sulfate resistance of concrete containing mineral admixtures. ACI Mater J 97:536–549

    CAS  Google Scholar 

  • Ylmén R, Jäglid U, Steenari BM, Panas I (2009) Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques. Cem Concr Res 39:433–439

    Article  Google Scholar 

  • Zhao S, Sun W (2014) Nano-mechanical behavior of a green ultra-high performance concrete. Constr Build Mater 63:150–160

    Article  Google Scholar 

Download references

Acknowledgments

The fellowship provided by DAE, Govt. of India for carrying out this research is greatly acknowledged. The authors sincerely acknowledge the Director, IGCAR, and Dr. S. Raju, AD, MCG for their support. The authors also thank the Indian Institute of Technology, Madras for SEM analysis. Ms. Sudha Uthaman and Ms. Rasitha. T. P, MMG, IGCAR are also acknowledged for the help in calcium leaching and FTIR measurements.

Author information

Authors and Affiliations

  1. Corrosion Science and Technology Division, MCG, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam, Tamil Nadu, 603102, India

    Manu Harilal, R. P. George, John Philip & Shaju K. Albert

Authors
  1. Manu Harilal
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. R. P. George
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. John Philip
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Shaju K. Albert
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

Manu Harilal: conceptualization, methodology, formal analysis and investigation, writing—original draft preparation; R. P. George: supervision, writing—review and editing; John Philip: supervision, writing—review and editing, Shaju. K. Albert: supervision, writing—review and editing.

Corresponding author

Correspondence to R. P. George.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Additional information

Responsible Editor: Philipp Gariguess

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Harilal, M., George, R.P., Philip, J. et al. Binary blended fly ash concrete with improved chemical resistance in natural and industrial environments. Environ Sci Pollut Res 28, 28107–28132 (2021). https://doi.org/10.1007/s11356-021-12453-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-021-12453-4

Keywords

Search

Navigation