Skip to main content
Log in

Enhancement of Lubrication Properties of Nano-oil by Controlling the Amount of Fullerene Nanoparticle Additives

  • Original Paper
  • Published:
Tribology Letters Aims and scope Submit manuscript

Abstract

In this article, the tribological properties of fullerene nanoparticles-added mineral oil were investigated as a function of volume concentration of fullerene nanoparticle additives (e.g., 0.01, 0.05, 0.1, and 0.5 vol.%). The lubrication tests were performed at the disk-on-disk type tester under the various normal forces and fullerene volume concentrations. Tribological properties were evaluated by measuring the friction surface temperature and friction coefficient, and then interpreted in terms of Stribeck curves. At the same time the friction surfaces tested were evaluated by observing their SEM images, surface roughness, and AFM images. The results showed that the nano-oil containing the higher volume concentration of fullerene nanoparticles resulted in the lower friction coefficient and less wear in the fixed plate, indicating that the increase of fullerene nanoparticle additives improved the lubrication properties of regular mineral oil.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Hisakado, T., et al.: Effects of fullerene C60 on the friction and wear characteristics of ceramics in ethanol. Tribol. Int. 32, 413–420 (1999)

    Article  CAS  Google Scholar 

  2. Ginzburg, B.M., et al.: Antiwear effect of fullerene C60 additives to lubricating oils. Russian J. Appl. Chem. 75, 1130–1335 (2002)

    Article  Google Scholar 

  3. Ishikawa, T., et al.: Role of water in the lubrication of hydrogel. Wear 261, 500–504 (2006)

    Article  CAS  Google Scholar 

  4. Xiao, L., et al.: A study on the effect of surface topography on rough friction in roller contact. Wear 245, 1162–1169 (2003)

    Article  CAS  Google Scholar 

  5. Ishii, N., et al.: Lubrication mechanism at thrust slide-bearing of scroll compressors (experimental study). Proceedings of International Compressor Engineering Conference at Purdue University 1–8 (C103) (2004)

  6. Cho, S.W., et al.: Frictional mode of barrel shaped piston rings under flooded lubrication. Tribol. Int. 33, 545–551 (2000)

    Article  CAS  Google Scholar 

  7. Talke, F.E.: A review of ‘contact recording’ technologies. Wear 207, 118–121 (1997)

    Article  CAS  Google Scholar 

  8. Cho, Y.J.: Wear Engineering, p.153. Pusan National University Press, Pusan (2003)

  9. Luengo, G., et al.: Generalized effects in confined fluids: new friction map for boundary lubrication. Wear 200, 328–335 (1996)

    Article  CAS  Google Scholar 

  10. Lee, J.K., et al.: Lubrication properties of fullerene nano-oil in the thrust slide-bearing of scroll compressors. Submitted to Int. J. Refrigeration (2006)

  11. Lee, S.Y., et al.: Application of the duplex TiN coatings to improve the tribological properties of electro hydrostatic actuator pump parts. Surf. Coat Technol. 193, 266–271 (2005)

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Soo H. Kim.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lee, J., Cho, S., Hwang, Y. et al. Enhancement of Lubrication Properties of Nano-oil by Controlling the Amount of Fullerene Nanoparticle Additives. Tribol Lett 28, 203–208 (2007). https://doi.org/10.1007/s11249-007-9265-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11249-007-9265-2

Keywords

Navigation