The engineering calculation procedure of the stress-strain state of the two-layer coating under the action of the arbitrarily oriented local loads as applied to the strength optimization of the coating layers’ thickness is proposed. The optimal thickness of the substrate resisting the maximal critical load has been derived.
Similar content being viewed by others
References
L. S. Saakiyan, A. P. Efremov, L. Ya. Ropyak, and A. V. Épelfeld, Application of Surface Strengthening of Aluminum Alloys and Coatings for Improving Corrosion and Mechanical Resistance of Oil-and-Gas Industrial Equipment Components [in Russian], Moscow, VNIIOÉNG (1986).
M. D. Klapkiv, M. M. Student, V. I. Pokhmurs’kyi, et al., Ceramic Coating Deposition Technique [in Ukrainian], Ukraine Patent on Applicable Model No. 17243. Valid since September 15, 2006.
N. A. Dolgov, Deformation and Fracture Resistance of Materials with Functional Coatings [in Russian], Krok, Ternopol (2010).
A. S. Velichkovich and L. Ya. Ropyak, “Strength assessment of a drill pump piston with a multilayered coating including the account of emergency loads,” Visn. Univ. Lviv. Politekhnika, No. 772, 182–191 (2013).
V. I. Pokhmurs’kyi, M. M. Student, V. V. Shmyrko, et al., “Effect of the grinding mode on surface roughness and tribological characteristics of oxide-ceramic layers,” Probl. Tribol., No. 1, 116–122 (2014).
L. Ya. Ropyak, I. P. Shatskyi, and M. V. Makoviichuk, “Strength assessment of two-layer coating subjected to the local loading,” in: “Scientific Notes” Collection of Papers of Lviv National Polytechnic University [in Ukrainian], Issue 50, Lviv (2015), pp. 148–152.
V. Z. Vlasov and N. N. Leont’ev, Beams, Plates, and Shells on the Elastic Bed [in Russian], Fizmatgiz, Moscow (1960).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Problemy Prochnosti, No. 5, pp. 163 – 168, September – October, 2016.
Rights and permissions
About this article
Cite this article
Shatskyi, I.P., Ropyak, L.Y. & Makoviichuk, M.V. Strength Optimization of a Two-Layer Coating for the Particular Local Loading Conditions. Strength Mater 48, 726–730 (2016). https://doi.org/10.1007/s11223-016-9817-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-016-9817-5