The effect of a titanium nitride coating on stress structural inhomogeneity in oxide-carbide ceramic under action of heat flow is studied. A considerable effect of a coating on properties determining stress structural inhomogeneity within ceramic is revealed. A requirement is noted for considering stress structural inhomogeneity in designing objects from oxide-carbide ceramic with a coating.
Similar content being viewed by others
References
S. N. Grigor’ev, V. V. Kuzin, et al., “Influence of thermal loads on the stress–strain state of aluminum-oxide ceramic cutting plates,” Russian Eng. Res., 32(5), 473 – 477 (2012).
V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Effect of a TiC coating on the stress–strain state of a plate of a high-density nitride ceramic under nonsteady thermoelastic conditions,” Refract. Indust. Ceram., 54(5), 376 – 380 (2014).
V. V. Kuzin, S. N. Grigor’ev, and V. N. Ermolin, “Stress inhomogeneity in a ceramic surface layer under action of an external load. Part 2. Effect of thermal loading,” Refract. Indust. Ceram., 54(6), 497 – 501 (2014).
S. N. Grigor’ev, V. V. Kuzin, and M. A. Volosova, “Stress–strain state of a coated nitride ceramic tool,” Russian Eng. Res., 32(7/8), 561 – 566 (2012).
V. V. Kuzin, “Thermal state of ceramic cutting tools in high-speed cutting,” Russian Eng. Res., 24(9), 32 – 40 (2004).
V. V. Kuzin, “Effective use of high density ceramic for manufacture of cutting and working tools,” Refract. Indust. Ceram., 51(6), 421 – 426 (2010).
M. A. Volosova, S. N. Grigor’ev, and V. V. Kuzin, “Effect of titanium nitride coating on stress structural inhomogeneity in oxide-carbide ceramic. Part 1. Study procedure, “ Novye Ogneupory, No. 8, 28 – 31 (2014).
V. V. Kuzin, “Microstructural model of ceramic cutting plate,” Russian Eng. Res., 31(5), 479 – 483 (2011).
V. V. Kuzin and V. I. Myachenkov, “Stress–strain state of ceramic cutting plate,” Russian Eng. Res., 31(10), 994 – 1000 (2011).
S. N. Grigor’ev, V. I. Myachenkov, and V. V. Kuzin, “Automated thermal-strength calculations of ceramic cutting plates,” Russian Eng. Res., 31(11), 1060 – 1066 (2011).
V. Kuzin and S. Grigoriev, “Method of investigation of the stress–strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mechan. Mater., 486, 32 – 35 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Parts 1 – 3 published in Novye Ogneupory Nos. 8, 10, and 12 (2014).
Translated from Novye Ogneupory, No. 2, pp. 47 – 52, February 2015.
Rights and permissions
About this article
Cite this article
Volosova, M.A., Grigor’ev, S.N. & Kuzin, V.V. Effect of Titanium Nitride Coating on Stress Structural Inhomogeneity in Oxide-Carbide Ceramic. Part 4. Action of Heat Flow. Refract Ind Ceram 56, 91–96 (2015). https://doi.org/10.1007/s11148-015-9789-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-015-9789-1