Abstract
Solid paraffins were steam-cracked in order to imitate the pyrolysis of low polymerization grade polyethylene. The behavior of the paraffins in steam-cracking corresponds to that of gasolines due to the similar C/H ratio.
Similar content being viewed by others
References
A. Pinter, A. Tungler, L. Nagy, L. Vida, T. Gál, J. Kerezsi: Int. J. Chemical Reactor Engineering, 2, A15. http://www.bepress.com/ijcre/vol2/A15
A. Behr, K. Griesbaum, D. Biedenkapp, H. W. Voges, D. Garbe, C. Paetz, G. Collin, D. Mayer, H. Höke: Hydrocarbons in Ullmann’s Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA, Düsseldorf, Federal Republic of Germany DOI: 10.1002/14356007.a13_227, Article Online Posting Date: June 15, 2000
J. Giraud, A. R. Partovi, B. Bluori: Informations Chimie, 171, 229 (1977)
J. Giraud, A. R. Partovi, B. Bluori: Informations Chimie, 184, 111 (1978)
B. Blouri, J. Giraud, S. Nouri, D. Herault: Ind. Eng. Chem. Process Des. Dev., 20, 307–313 (1981)
H.R. Linden, R.E. Peck: Ind. Eng. Chem., 46, 2470 (1955).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pintér, A., Tungler, A., Nagy, L. et al. Steam-cracking of high molecular weight paraffins. React Kinet Catal Lett 92, 223–230 (2007). https://doi.org/10.1007/s11144-007-5186-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11144-007-5186-1